設定
迅速な配送
送料は無料
Incoterms
お支払い方法
マーケットプレイス製品
Slide 1
Slide 2
Slide 3
Slide 4
Slide 5
Slide 6
Slide 7
Slide 8
Slide 9
Slide 10
Slide 11
Slide 12
Slide 13
Slide 14
Slide 15
Slide 16
Slide 17
Slide 18
Slide 19
Slide 20
Slide 21
Slide 22
Slide 23
Slide 24
Slide 25
Slide 26
Slide 27
Slide 28
Slide 29
Slide 30
Slide 31
Slide 32
Slide 33
Slide 34
Slide 35
Slide 36
Slide 37
Slide 38
Slide 39
Slide 40
Slide 41
Slide 42
Slide 43
Slide 44
Slide 45
Slide 46
Slide 47
Slide 48
Slide 49
Slide 50
Slide 51
Slide 52
Slide 53
Slide 54
Slide 55
Slide 56
Slide 57
Product List
The SPI interface configuration for the CP2400 and CP2402 devices is shown on this page. They will always be the slave device to the master SPI node. The CP240x devices uses a 4 wire connection scheme that includes the chip select signal as typically found in a single master multiple slave topology. In this configuration, each slave device has its own chip select and when driven it is allowed to drive the MISO pins and all other inactive devices tri-state the pin.
PTM Published on: 2011-05-13
日本