LMG1210EVM-012: 10A, 0 ~ 100V Half Bridge Driver

Summary

The LMG1210EVM-012 is a small, easy-to-use power stage with an external PWM signal (or HI and LI). The board can be configured as a buck converter, boost converter or other converter topology using a half bridge. Because this is an open-loop board with an external PWM signal, do not use it to evaluate transient response. It can be used to evaluate the performance of the LMG1210 as a driver for the GaN FET halfbridge converter to sample measurements such as efficiency, switching speed, dv/dt, and adjustable dead time. The EVM features a LMG1210 half-bridge driver coupled with two 100 V, 7 mΩ GaN FETs in a half bridge configuration

Specifications

Manufacturer	Texas Instruments
Category	Power Management
Sub-Category	Power Output Stages (H-Bridge, Half Bridge)
Eval Board Part Number	296-LMG1210EVM-012-ND
Eval Board Supplier	Texas Instruments
Eval Board	Board not Stocked
Configuration	1 Half H-Bridge
Voltage Out Range	0 ~ 100 V
Current Out	10 A
Interface	PWM, Single
Features	Under Voltage Protection (UVP)
Switching Frequency (Max)	15 MHz
Component Count + Extras	35 + 31
Design Author	Texas Instruments
Main I.C. Base Part	LMG1210
Date Created By Author	2018-01
Date Added To Library	2019-08