DC1459B-A: 1.8V, 2.5V, 3.3V, or 3.6V @ 100mA, 2.7 ~ 20 Vin, Piezo Energy Harvesting

Summary

Demonstration Circuit 1459B is an energy harvesting power supply featuring the LTC3588-1/LTC3588-2.

The LTC3588 integrates a low-loss full-wave bridge with a high efficiency buck converter to form a complete energy harvesting solution optimized for energy sources with high output impedance such as piezoelectric transducers.

An ultralow quiescent current undervoltage lockout mode with a wide hysteresis window allows charge to accumulate on an input capacitor until the buck converter can efficiently transfer a portion of the stored charge to the output.

Four output voltages are pin selectable with up to 100mA of continuous output current. A power good comparator produces a logic high referenced to VOUT on the PGOOD pin when the converter reaches the programmed VOUT, signaling that the output is in regulation.

Specifications

Manufacturer	Analog Devices Inc.
Category	Energy Harvesting
Sub-Category	Vibration Energy Harvesting
Eval Board Part Number	505-DC1459B-A-ND
Eval Board Supplier	Analog Devices Inc.
Eval Board	Normally In Stock
Application / Target Market	Energy Harvesting RF: Wireless Sensor
Voltage Out	1.8 V 2.5 V 3.3 V 3.6 V
Voltage In	2.7 ~ 20 V
Current Out	100 mA
Features	Current Limit (Adj. or Fixed) Power Good Output Under Voltage Protection, Brown-Out
Design Author	Linear Technology
Component Count + Extras	6 + 12
Main I.C. Base Part	LTC3588-1
Date Created By Author	2010-04
Date Added To Library	2016-10