BQ51013AEVM-764(#2):Wireless Power, WPC-Certified

Summary

The bq51013AEVM-764 evaluation module (EVM) demonstrates the receiver portion of the bqTESLA™ wireless power system. This receiver EVM is a complete receiver-side solution that produces 5 V out at up to 1 A when coupled with the bqTESLA™ transmitter. The bq51013AEVM-764 device shown on this EVM along with external components that support the device for a complete solution.

The bqTESLA™ receiver can be used in any number of low-power battery portable devices as a power source for charging.
Output voltage of 5 V up to 1 A
External adapter switchover and control circuit
Low-profile, external pick-up coil
Frame is configured to provide correct receiver to transmitter spacing.
Room above coil for testing with battery, key for tuning
Adjustable resistor R16 can be used to set max output current

Specifications

Manufacturer	Texas Instruments
Category	Power Management
Sub-Category	Inductive Charging / Wireless Power
Eval Board Part Number	296-30563-ND
Eval Board Supplier	Texas Instruments
Eval Board	Board not Stocked
Voltage Out	5 V
Current Out	1 A
Protocol	Inductive, Qi-Compliant
Voltage In	4 ~ 20 V
Current In	- Not Given
Standard(s)	Qi v1.0
Features	Shutdown, Enable, Standby
Frequency	110 ~ 205 kHz
No-load Input Power @ Conditions	- Not given
Efficiency @ Conditions	>74%, 19V in, 5V @ 2.5 ~ 5 W Out
Component Count + Extras	35 + 32
Design Author	Texas Instruments
Main I.C. Base Part	BQ51013A
Date Created By Author	2012-04
Date Added To Library	2012-07