BQ51013AEVM-765(#1): 5V @ 1A, 4 ~ 8V in

Summary

The bq51013AEVM-765 wireless power receiver evaluation kit from Texas Instruments is a high-performance, easy-to-use development kit for the design of wireless power solutions.

Consisting of a 5 V power supply receiver and associated magnetics, the kit enables designers to speed the development of their end-applications.

The bq51013AEVM-765 evaluation module (EVM) demonstrates the receiver portion of the bqTESLA™ wireless power system. This receiver EVM is a complete receiver-side solution that produces 5 V out at up to 1 A when coupled with the bqTESLA™ transmitter.

The bq51013AEVM-765 device shown on this EVM along with external components that support the device for a complete solution can be used in any number of low-power battery portable devices as a power source for charging. With contact-free charging capability, no connections to the device are needed.

Specifications

Manufacturer	Texas Instruments
Category	Power Management
Sub-Category	Inductive Charging / Wireless Power
Eval Board Part Number	296-35888-ND
Eval Board Supplier	Texas Instruments
Eval Board	Board not Stocked
Voltage Out	5 V
Current Out	1 A
Protocol	Inductive, Qi-Compliant
Voltage In	4 ~ 8 V
Current In	- Not Given
Standard(s)	Qi v1.0
Features	Current Limit (Adj. or Fixed) Fault Indication LDO Regulator(s), On-Chip Shutdown, Enable, Standby Thermal Protection
Frequency	110 ~ 205 kHz
No-load Input Power @ Conditions	- Not given
Efficiency @ Conditions	>74%, 5.5 Vin, 5 V @ 500 mA
Component Count + Extras	35 + 6
Design Author	Texas Instruments
Main I.C. Base Part	BQ51013A
Date Created By Author	2012-06
Date Added To Library	2014-02