Bantam Tools

Create PCBs for Rapid Prototyping – Part 3 – Creating & Milling a Single Sided PCB

Shawn Hymel demonstrates the step by step procedure to produce a single side breakout PCB in a Bantam Milling machine. From board insertion to bit selection and order of operation, Shawn details each step with useful tips and hints to ensure success.

Publish Date: 2019-03-27

Create PCBs for Rapid Prototyping – Part 4 – Creating & Milling a Double Sided PCB

Using an ESP3266 RF Tranceiver IoT project as an example, Shawn Hymel demonstrates the step by step procedure to produce a double side PCB in a Bantam Milling machine. From board insertion to bit selection and order of operation, Shawn details each s

Publish Date: 2019-03-27

Using KiCad to design a PCB; Part2 – Maker.io Tutorial | Digi-Key Electronics

Shawn Hymel walks through the process of designing a custom PCB using KiCad and prototyping the board using a Bantam Tools milling machine and gerber files.

Publish Date: 2019-03-27

Create PCBs for Rapid Prototyping – Part 1 – Setting up a Bantam Tools PCB Milling Machine

Shawn Hymel explains how to set up and configure a Bantam Tools PCB milling machine in detail including tips and tricks to ease use and prevent accidents. Shawn provides an overview of the PCB materials, accessories and commonly used bits.

Publish Date: 2019-03-27