Altaneos is your valued partner for operations such as analysis, Research & Development, consultancy, industrialization and manufacturing of electronic equipment and real-time embedded software.

Throughout the creation steps involved in the conception of a new product, Altaneos provides services tailored to the various stages of the project: Analysis (feasibility, budget and planning, critical technology selection, …), Research & Development (schematic design, PCB design prototyping, embedded software, mobile apps, mechanical integration, …), Industrialization (CE, FCC, UL marking, production test benches, …) and Consultancy (diagnostic on existing products, certification advice, debugging sessions, …)

Hardware Design technical skills: Schematic design and PCB routing of analog, digital, mixed-signal and telecom boards; VHDL Programmable Logic (FPGA, PLD); Almost any kind of CPU or MCU; Analog/Digital data acquisition systems; Wired communication (RS232, RS485, USB, Ethernet, CAN, Modbus, Profibus); Wireless communication (GSM/xG, ISM, ZigBee, Bluetooth, WiFi, NFC, GPS); High-speed LAN switching/routing, LED lighting.

Embedded Software technical skills: bare-metal or OS oriented (Embedded Linux, FreeRTOS); BSP, board bring-up; bootloaders and device drivers; Standard protocol integration (TCP/IP, HTTP, CAN, Modbus, Profibus, ZigBee, Bluetooth, …); Custom protocol design; User Interfaces; Digital Signal Processing, Mobile Apps, Voice-over-IP software.

  • Programming
  • Software
  • Audio
  • Design for RoHS Compliance
  • DSP
  • Ethernet
  • FPGA Design
  • General - Digital and Analog Circuitry
  • High Density/Low Profile/BGA Packaging
  • Impedance Controlled PCB Design
  • Multilayer High-Speed Mixed Digital and Analog
  • PCB Design/Layout
  • Power Supply Design
  • Schematic Capture
  • USB
  • Video - HDMI, Display Port, DVI
  • Enclosure Design
  • PCB and Component 3D Modeling
  • Component Purchasing
  • FCC Certification
  • Product Cost Estimating
  • Project Management
  • Technical Marketing
  • UL Certification
  • Design for Manufacturing
  • Documented Pre-Production Prototypes
  • Low to Medium Volume Production Runs
  • Manufacturing Services
  • Prototype Assembly and Testing
  • Rapid Prototyping Capability
  • Test Fixture Development
  • Android OS
  • ARM
  • Board Bring Up (BBU)
  • Boot Loaders
  • C/C++
  • Development Tool Porting (gcc, gdb, oprofile, etc.)
  • Device Drivers (Linux, Custom Kernel)
  • DSP Algorithms, Signal Processing IP
  • Embedded Graphical User Interfaces (GUIs)
  • FPGA, PLD, & HDL-based designs (Verilog & VHDL)
  • Java
  • Linux
  • Linux Board Support Packages
  • Linux - Debian
  • Linux - Ubuntu
  • Microcontroller Class Embedded Software/Firmware
  • OS Based Microprocessor Embedded Software/Firmware
  • PC Based Graphical User Interfaces
  • PC Software
  • RTOS
  • Smart Phone Apps
  • Web Based User Interfaces/Server and Data Integration
  • Block Level System Design and Integration
  • Communications Systems/M2M
  • Design for EMI/RFI Immunity
  • Design for Testability
  • Modifiable In-House Reference Platform
  • Antenna Design
  • Bluetooth
  • Cellular
  • GPS
  • Pre-Certified Module Integration
  • Wi-Fi
  • WiMax/LTE
  • ZigBee/802.15.4
  • Intel Quartus Prime
  • Atmel AVR Studio
  • Freescale Code Warrior
  • IAR
  • Keil
  • Microchip MPLAB
  • Texas Instruments Code Composer Studio
  • OnShape
  • Altium
  • Agriculture
  • Consumer
  • Electronics
  • Food and Beverage
  • Industrial
  • Life Sciences
  • Medical
  • OEM's


Chaussée Verte, 93B, 4470, Saint-Georges Beligum
Christophe Niclaes
The listing of any provider in the Design Services Providers Network does not constitute or imply an endorsement, sponsorship, or recommendation by Digi-Key of the third party, its Web site, or the information or services available from those sources or that it is suitable for your needs. Digi-Key is not responsible for the services or information obtained from any of these sources. This information is provided as a convenience for users of the Digi-Key web site. You must make your own decision based on your independent review regarding your interactions or communications with any of these providers.