ESP32-PICO-KIT is an ESP32-based mini development board produced by Espressif.
The core of this board is ESP32-PICO-D4 - a System-in-Package (SiP) module with complete Wi-Fi and Bluetooth functionalities. Compared to other ESP32 modules, ESP32-PICO-D4 integrates peripheral components in one single package, which otherwise would need to be installed separately.
The development board features a USB-UART Bridge circuit which allows developers to connect the board to a computer’s USB port for flashing and debugging.
All the IO signals and system power on ESP32-PICO-D4 are led out to two rows of 20 x 0.1” header pads on both sides of the development board for easy access. For compatibility with Dupont wires, 2 x 17 header pads are populated with two rows of male pin headers. The remaining 2 x 3 header pads beside the antenna are not populated. These pads may be populated later by the user if required.
|Category||Open Source MCU Platforms|
|Eval Board Part Number||1904-1030-ND|
|Eval Board Supplier||Espressif Systems|
Arduino IDE, with Software Add-on
4 MB / 520 kB
24 I/O, 19 PWM
|Analog Outputs (DACs)||
2 x 8 Bit
|Analog Inputs (ADCs)||
18 x 12 Bit
Cryptographic Acceleration Unit
Real Time Clock
True Random Number Generator
Watch Dog Timers
Bluetooth v4.2 + EDR, Class 1, 2 and 3
Bluetooth Low Energy (BLE)
Wi-Fi 802.11 b/g/n
3.3 ~ 5 V
|Touch Sensing Pins||
USB Type-Micro B
1057² mm, 1.64² In
|Main I.C. Base Part||
|Date Created By Author||2018-03|
|Date Added To Library||2019-05|