TPS54360EVM-182: 5V @ 3.5A, 8.5 ~ 60V in


The user's guide contains background information for the TPS54360 as well as support documentation for the TPS54360EVM-182 evaluation module (PWR182). Also included are the performance specifications, the schematic, and the bill of materials for the TPS54360EVM-182. The TPS54360 DC-DC converter is designed to provide up to a 3.5 A output from an input voltage source of 4.5 V to 60 V.

This evaluation module is designed to demonstrate the small, printed-circuit-board areas that may be achieved when designing with the TPS54360 regulator. The switching frequency is externally set at a nominal 600 kHz. The high-side MOSFET is incorporated inside the TPS54360 package along with the gate drive circuitry. The compensation components are external to the integrated circuit (IC), and an external resistor divider allows for an adjustable output voltage. Additionally, the TPS54360 provides an adjustable undervoltage lockout with hysteresis through an external resistor divider. The absolute maximum input voltage is 60 V for the TPS54360EVM-182.


Manufacturer Texas Instruments
Category AC/DC and DC/DC Conversion
Sub-Category DC/DC SMPS - Single Output
Eval Board Part Number 296-34982-ND
Eval Board Supplier Texas Instruments
Eval Board Normally In Stock
Topology Step Down
Outputs and Type 1 Non-Isolated
Voltage Out: Factory Set 5 V
Current Out 3.5 A
Voltage In 8.5 ~ 60 V
Efficiency @ Conditions >90%, 8V in, 5V @ 0.2 ~ 3.5 A
>90%, 12V in, 5V @ 0.5 ~ 2.5 A
>85%, 36V in, 5V @ 1.2 ~ 3.5 A
>85%, 24V in, 5V @ 0.7 ~ 3.5 A
>80%, 48V in, 5V @ 1.0 ~ 3.5 A
>78%, 60V in, 5V @ 1.0~ 3.5 A
Voltage Out Range 0.8 ~ 58 V
Features Current Limit (Adj. or Fixed)
Frequency Foldback
Light Load Mode
Over Voltage Protection
Shutdown, Enable, Standby
Thermal Protection
Under Voltage Protection, Brown-Out
Voltage Reference
Switching Frequency 600 kHz
Standby Current [Typical] 2.25 µA
Quiescent Current [Typical] 146 µA
Component Count + Extras 16 + 13
Internal Switch Yes
Design Author Texas Instruments
Application / Target Market Automotive
Power: Auxiliary Power Supply
Power: Industrial Power
Standby Current [Maximum] 4.5 µA
Quiescent Current [Maximum] 175 µA
Main I.C. Base Part TPS54360
Date Created By Author 2012-08
Date Added To Library 2013-04

Eval Board

Order a fully assembled board:

Quantity Available: 3