TPS6211xEVM-101: 3.3V @ 1.5A, 3.6 ~ 17Vin


The Texas Instruments TPS62110 is a 1.5-A synchronous step-down converter in a 16-pin QFN package. Both fixed and adjustable output voltage units are available.

The TPS62110EVM-101 uses the TPS62110 adjustable version and is set to 3.3 V output. The EVM operates with full rated performance with an input voltage between 3.6 V and 17 V.

U1 is configured for evaluation of the adjustable output version. This unit is configured for 3.3 V. Resistors R1 and R2 are used to set the output voltage between 1.2 V and 16 V. See the TPS62110 datasheet (SLVS585) for recommended values. The feedforward capacitor C3 may also need to be changed. For more information see the data sheet.


Manufacturer Texas Instruments
Category AC/DC and DC/DC Conversion
Sub-Category DC/DC SMPS - Single Output
Eval Board Part Number 296-21163-ND
Eval Board Supplier Texas Instruments
Eval Board Normally In Stock
Topology Step Down
Outputs and Type 1 Non-Isolated
Voltage Out: Factory Set 3.3 V
Current Out 1.5 A
Voltage In 3.6 ~ 17 V
Efficiency @ Conditions - Not Given
Voltage Out Range 1.2 ~ 16 V
Features Current Limit (Adj. or Fixed)
Light Load Mode
Over Current Protection
Power Good Output
Shutdown, Enable, Standby
Soft Start
Thermal Protection
Under Voltage Protection, Brown-Out
Switching Frequency 1 MHz
Standby Current [Typical] 1.5 µA
Quiescent Current [Typical] 23 µA
Component Count + Extras 14 + 7
Internal Switch Yes
Design Author Texas Instruments
Application / Target Market Point of Load (PoL)
Portable Devices
Standby Current [Maximum] 5 µA
Quiescent Current [Maximum] 26 µA
Main I.C. Base Part TPS62110
Date Created By Author
Date Added To Library 2011-03

Share This Design

Eval Board

Order a fully assembled board:

Quantity Available: 1