JPY | USD

ISO72x and ISO72xx Digital Isolators

Single and Dual High-Speed Digital Isolators - Now Available at Digi-Key

ISO72x & ISO72xx Digital Isolators Texas Instruments' ISO721, ISO721M, ISO722, and ISO722M are digital isolators with a logic input and output buffer separated by a silicon dioxide (SiO2) insulation barrier. This barrier provides galvanic isolation of up to 400V.

The ISO7220 and ISO7221 are dual-channel digital isolators. To facilitate PCB layout, the channels are oriented in the same direction in the ISO7220 and in opposite directions in the ISO7221. These devices have a logic input and output buffer that is separated by TI’s silicon dioxide (SiO2) isolation barrier, which provides galvanic isolation of up to 4000V. Tri-channel and quad-channel digital isolators are also available.

Overview

Used in conjunction with isolated power supplies, these devices prevent noise currents on a data bus or other circuits from entering the local ground and interfering with or damaging sensitive circuitry.

A binary input signal is conditioned, translated to a balanced signal, and then differentiated by the capacitive isolation barrier. Across the isolation barrier, a differential comparator receives the logic transition information, then sets or resets a flip-flop and the output circuit accordingly.

Features: ISO721, ISO721M, ISO722, and ISO722M
Features: ISO7220 and ISO7221
  • 4000Vpeak isolation, 560 Vpeak VIORM
    • UL 1577, IEC 60747-5-2 (VDE 0884, Rev 2), IEC 61010-1, IEC 60950-1 and CSA approved
    • 50 kV/µs typical transient immunity
  • Signaling rate 0Mbps to 150Mbps
    • Low propagation delay
    • Low pulse skew (pulse-width distortion)
  • Low-power sleep mode
  • High electromagnetic immunity
  • Low input-current requirement
  • Failsafe output
  • Drop-in replacement for most opto and
    magnetic isolators
  • 4000Vpeak isolation, 560 Vpeak VIORM
    • UL 1577, IEC 60747-5-2 (VDE 0884, Rev 2), IEC 61010-1, IEC 60950-1 and CSA approved
    • 50 kV/µs typical transient immunity
  • 1, 5, 25, and 150Mbps signaling rate options
    • Low channel-to-channel output skew; 1ns max
    • Low pulse-width distortion (PWD); 1ns max
    • Low jitter content; 1ns typ at 150Mbps
  • Typical 25-year life at rated voltage
  • Operates with 3.3V or 5V supplies
  • 4 kV ESD protection
  • High electromagnetic immunity
  • -40°C to 125°C operating range 

Digital Isolators

画像メーカー品番商品概要技術タイプ入手可能な数量
DGTL ISO 4000VPK 1CH GP 8SOICISO721MMDREPDGTL ISO 4000VPK 1CH GP 8SOIC静電容量カップリング汎用645 - 即時
10001 - 工場在庫品
詳細を閲覧
DGTL ISO 2500VRMS 1CH GP 8SOICISO722DRDGTL ISO 2500VRMS 1CH GP 8SOIC静電容量カップリング汎用4721 - 即時
10000 - 工場在庫品
詳細を閲覧
DGTL ISO 2500VRMS 2CH GP 8SOICISO7220ADRDGTL ISO 2500VRMS 2CH GP 8SOIC静電容量カップリング汎用13234 - 即時
5000 - 工場在庫品
詳細を閲覧
DGTL ISO 2500VRMS 2CH GP 8SOICISO7221CDRDGTL ISO 2500VRMS 2CH GP 8SOIC静電容量カップリング汎用10032 - 即時詳細を閲覧
刊行: 2009-09-11