Microchip Technologyが提供するPIC12F1822, PIC16F182x Briefのデータシート

Q ‘MICROCHIP
2009 Microchip Technology Inc. Advance Information DS41406B-page 1
PIC12F1822/16F182X
High-Performance RISC CPU:
Only 49 Instructions to learn
Operating Speed:
- DC – 32 MHz clock input
- DC – 125 ns instruction cycle
Interrupt Capability with Automatic Context
Saving
16-Level Deep Hardware Stack with Optional
Overflow/Underflow Reset
Direct, Indirect and Relative Addressing modes:
- Two full 16-bit File Select Registers (FSRs)
- FSRs can read program and data memory
Special Microcontroller Features:
Precision Internal Oscillator:
- Factory calibrated to ±1%, typical
- Software selectable frequency range from
32 MHz to 31 kHz
31 kHz Low-Power Internal Oscillator
External Oscillator Block with:
- 4 crystal/resonator modes up to 32 MHz
using 4xPLL
- 3 external clock modes up to 32 MHz
4x Phase Locked Loop (PLL)
Fail-Safe Clock Monitor
Two-Speed Start-up
Power-Saving Sleep mode
Power-on Reset (POR)
Power-up Timer (PWRT)
Oscillator Start-Up Timer (OST)
Brown-out Reset (BOR) with Selectable Trip Point
Extended Watchdog Timer (WDT)
In-Circuit Serial Programming™ (ICSP™) via two
pins
In-Circuit Debug (ICD) via Two Pins
Enhanced Low-Voltage Programming (LVP)
Operating Voltage Range:
- 1.8V to 3.6V (PIC1XLF182X)
- 1.8V to 5.5V (PIC1XF182X)
Programmable Code Protection
Self-Programmable under Software Control
Low-Power Features:
Standby Current (PIC1XLF182X):
- 30 nA @ 1.8V, typical
Operating Current (PIC1XLF182X):
-75A @ 1 MHz, 1.8V, typical
Low-Power Watchdog Timer Current
(PIC1XLF182X):
- 500 nA @ 1.8V, typical
Peripheral Features:
Up to 17 I/O Pins and 1 Input-only Pin:
- High current sink/source for LED drivers
- Individually programmable interrupt-on-
change pins
- Individually programmable weak pull-ups
Timer0: 8-Bit Timer/Counter with 8-Bit
Programmable Prescaler
Enhanced Timer1:
- 16-bit timer/counter with prescaler
- External Gate Input mode
- Dedicated low-power 32 kHz oscillator driver
Up to three Timer2 modules (Timer2,4,6): 8-Bit
Timer/Counter with 8-Bit Period Register,
Prescaler and Postscaler
Up to two Enhanced Capture, Compare, PWM
modules (ECCP):
- Software selectable time-bases
- Auto-shutdown and auto-restart
- PWM steering
Up to two Capture, Compare, PWM modules
(CCP):
- Software selectable time-bases
Up to two Master Synchronous Serial Port
(MSSP) with SPI and I2CTM with:
- 7-bit address masking
- SMBus/PMBusTM compatibility
Enhanced Universal Synchronous Asynchronous
Receiver Transmitter (EUSART):
- RS-232, RS-485 and LIN compatible
- Auto-Baud Detect
- Auto-wake-up on start
SR Latch (Integrated 555 Timer):
- Multiple Set/Reset input options
Analog-to-Digital Converter (ADC):
- 10-bit resolution
- Up to 12 channels
Up to 2 Comparators:
- Rail-to-rail inputs
- Power mode control
- Software controllable hysteresis
Voltage Reference module:
- Fixed voltage reference (FVR) with 1.024V,
2.048V and 4.096V output levels
- 5-bit rail-to-rail resistive DAC with positive
and negative reference selection
Capacitive Touch oscillator module:
- Up to 12 channels
Data Signal Modulator:
- Select modulator and carrier sources from
various module outputs.
8/14/20-Pin 8-Bit Flash Microcontroller Product Brief
PIC12F1822/16F182X
DS41406B-page 2 Advance Information 2009 Microchip Technology Inc.
TABLE 1: PIC12F1822/16F182X AND PIC12LF1822/16LF1823 FAMILY TYPES
Device
Program
Memory
Flash
(words)
Data
EEPROM
(bytes)
SRAM
(bytes) I/Os 10-bit A/D
(ch)
Timers
8/16-bit EUSART MSSP ECCP/
CCP
Cap Touch
Channels
PIC12F1822 2048 256 128 6 4 2/1 1 1 1/0 4
PIC12LF1822 2048 256 128 6 4 2/1 1 1 1/0 4
PIC16F1823 2048 256 128 12 8 2/1 1 1 1/0 8
PIC16LF1823 2048 256 128 12 82/1 1 1 1/0 8
PIC16F1824 4096 256 256 12 8 4/1 1 1 2/2 8
PIC16LF1824 4096 256 256 12 84/1 1 1 2/2 8
PIC16F1825 8192 256 1024 12 8 4/1 1 1 2/2 8
PIC16LF1825 8192 256 1024 12 84/1 1 1 2/2 8
PIC16F1828 4096 256 256 18 12 4/1 1 1 2/2 12
PIC16LF1828 4096 256 256 18 12 4/1 1 1 2/2 12
PIC16F1829 8192 256 1024 18 12 4/1 1 2 2/2 12
PIC16LF1829 8192 256 1024 18 12 4/1 1 2 2/2 12
SE3 55
2009 Microchip Technology Inc. Advance Information DS41406B-page 3
PIC12F1822/16F182X
FIGURE 1: 8-PIN DIAGRAM FOR PIC12F1822/LF1822
Note: Pin details are subject to change.
PDIP, SOIC, DFN
1
2
3
4
8
7
6
5
VDD
RA5
RA3
VSS
RA0
RA1
RA2
Note: See Table 2 for location of all peripheral functions.
RA4
PIC12F1822
PIC12LF1822
TABLE 2: 8-PIN ALLOCATION TABLE (PIC12F1822/LF1822)
I/O
8-Pin PDIP/SOIC/DFN
A/D
Reference
Cap Sense
Comparator
SR Latch
Timers
CCP
EUSART
MSSP
Interrupt
Modulator
Pull-up
Basic
RA0 7AN0 DACOUT CPS0 C1IN+ P1B(1) TX(1)
CK(1) SDO(1)
SS(1) IOC MDOUT YICSPDAT/
ICDDAT
RA1 6AN1 VREF CPS1 C1IN0- SRI RX(1)
DT(1) SCL
SCK
IOC MDMIN YICSPCLK/
ICDCLK
RA2 5AN2 CPS2 C1OUT SRQ T0CKI CCP1(1)
P1A(1)
FLT0
SDA
SDI
INT/
IOC
MDCIN1 Y —
RA3 4 — T1G(1) SS(1) IOC — YMCLR
VPP
ICDMCLR
RA4 3AN3 CPS3 C1IN1- T1G(1)
T1OSO
P1B(1) TX(1)
CK(1) SDO(1) IOC MDCIN2 Y OSC2
CLKOUT
CLKR
RA5 2 — SRNQ T1CKI
T1OSI
CCP1(1)
P1A(1) RX(1)
DT(1) IOC — Y OSC1
CLKIN
VDD 1 — — — — VDD
Vss8 — — — —— —— VSS
Note 1: Pin functions can be assigned to one of two pin locations via software.
16 15 H /MCLR
PIC12F1822/16F182X
DS41406B-page 4 Advance Information 2009 Microchip Technology Inc.
FIGURE 2: 14-PIN DIAGRAM FOR PIC16F/LF1823/1824/1825
FIGURE 3: 16-PIN DIAGRAM FOR PIC16F/LF1823/1824/1825
PIC16F1823/1824/1825
1
2
3
4
14
13
12
11
5
6
7
10
9
8
VDD
RA5
RA4
RA3
RC5
RC4
VSS
RA0
RA1
RA2
RC0
RC1
RC2
RC3
PDIP, SOIC, TSSOP
Note: See Table 3 for location of all peripheral functions.
PIC16LF1823/1824/1825
QFN
PIC16F1823/1824/1825
PIC16LF1823/1824/1825
RA0
RA1
RA2
RC0
9
10
11
12
56
RC4
RC3
RC1
RC2
78
2
3
1
4
RA5
RA4
RA3/MCLR/VPP
RC5
1516 1314
NC
VDD
NC
VSS
Note: See Table 3 for location of all peripheral functions.
2009 Microchip Technology Inc. Advance Information DS41406B-page 5
PIC12F1822/16F182X
TABLE 3: 14-PIN AND 16-PIN ALLOCATION TABLE (PIC16F/LF1823/1824/1825)
I/O
14-Pin PDIP/SOIC/TSSOP
16-Pin QFN
A/D
Reference
Cap Sense
Comparator
SR Latch
Timers
CCP
EUSART
MSSP
Interrupt
Modulator
Pull-up
Basic
RA0 13 7AN0 DACOUT CPS0 C1IN+ — — TX(1)
CK(1) IOC Y ICSPDAT/
ICDDAT
RA1 12 11 AN1 VREF CPS1 C12IN0- SRI RX(1)
DT(1) IOC Y ICSPCLK
ICDCLK
RA2 11 10 AN2 CPS2 C1OUT SRQ T0CKI CCP3(2)
FLT0
— INT/
IOC
— Y
RA3 4 3 T1G(1) SS(1) IOC Y MCLR
VPP
RA4 3 2 AN3 CPS3 T1G(1)
T1OSO
P2B(1,2) SDO(1) IOC Y OSC2
CLKOUT
CLKR
RA5 2 1 T1CKI
T1OSI
CCP2(1,2)
P2A(1,2) IOC Y OSC1
CLKIN
RC0 10 9AN4 CPS4 C2IN+ P1D(1,2) SCL
SCK
— Y
RC1 9 8 AN5 CPS5 C12IN1- P1C(1,2)
CCP4(2) SDA
SDI
— Y
RC2 8 7 AN6 CPS6 C12IN2- — — P1D(1)
P2B(1,2) SDO(1) MDCIN1 Y —
RC3 7 6 AN7 CPS7 C12IN3- — — P1C(1)
CCP2(1,2)
P2A(1,2)
SS(1) MDMIN Y —
RC4 6 5 C2OUT SRNQ P1B TX(1)
CK(1) MDOUT Y —
RC5 5 4 CCP1
P1A
RX(1)
DT(1) MDCIN2 Y —
VDD 116 — — VDD
VSS 14 13 ——VSS
Note 1: Pin functions can be assigned to one of two pin locations via software.
2: Pin function only available on PIC16F1824 and PIC16F1825.
4D U 1‘, .—.D j._. HE ]._. HE 1H Hg 1H HD jH HE 1H Hm 1H IIHI . 20191817 IIIII
PIC12F1822/16F182X
DS41406B-page 6 Advance Information 2009 Microchip Technology Inc.
FIGURE 4: 20-PIN DIAGRAM FOR PIC16F/LF1828/1829
FIGURE 5: 20-PIN DIAGRAM FOR PIC16F/LF1828/1829
PIC16F1828/1829
1
2
3
4
14
13
12
11
5
6
7
10
9
8
VDD
RA5
RA4
RA3
RC5
RC4
VSS
RA0
RA1
RA2
RC0
RC1
RC2
RC3
PDIP, SOIC, SSOP
Note: See Table 4 for location of all peripheral functions.
18
17
16
15
20
19
RC6
RC7
RB7
RB4
RB5
RB6
PIC16LF1828/1829
PIC16F1828/1829
QFN 4x4
Note: See Table 4 for location of all peripheral functions.
PIC16LF1828/1829
15 RA1
RA2
RC0
RC1
RC2
11
12
13
14
67
RC7
RB7
RB4
RB5
RB6
8910
2
3
1
18
1920 16
17
5
4
VDD
RA5
RA4
RA3/MCLR/VPP
RC5
RC4
RC3
RC6
VSS
RA0
:‘ m
2009 Microchip Technology Inc. Advance Information DS41406B-page 7
PIC12F1822/16F182X
TABLE 4: 20-PIN ALLOCATION TABLE (PIC16F/LF1828/1829)
I/O
20-Pin PDIP/SOIC/SSOP
20-Pin QFN
A/D
Reference
Cap Sense
Comparator
SR Latch
Timers
CCP
EUSART
MSSP
Interrupt
Modulator
Pull-up
Basic
RA0 19 16 AN0 VREF-
DACOUT
CPS0 C1IN+ IOC Y ICSPDAT/
ICDDAT
RA1 18 15 AN1 VREF+CPS1 C12IN0- SRI IOC Y ICSPCLK/
ICDCLK
RA2 17 14 AN2 CPS2 C1OUT SRQ T0CKI CCP3
FLT0
— INT/
IOC
— Y
RA3 4 1 T1G(1) IOC Y MCLR
VPP
RA4 320 AN3 CPS3 T1G(1)
T1OSO
P2B(1) SS2(1,2) IOC Y OSC2
CLKOUT
RA5 219 T1CKI
T1OSI
CCP2(1)
P2A(1) SDO2(1,2) IOC Y OSC1
CLKIN
RB4 13 10 AN10 CPS10 SDA1
SDI1
IOC — Y
RB5 12 9AN11 CPS11 — — RX(1)
DT(1) SDA2(2)
SDI2(2) IOC — Y
RB6 11 8 — SCL1
SCK1
IOC — Y
RB7 10 7 — TX(1)
CK(1) SCL2(2)
SCK2(2) IOC — Y
RC0 16 13 AN4 CPS4 C2IN+ — — P1D(1) SS2(1,2) — Y
RC1 15 12 AN5 CPS5 C12IN1- — — P1C(1) SDO2(1,2) — Y
RC2 14 11 AN6 CPS6 C12IN2- — — P1D(1)
P2B(1) MDCIN1 Y —
RC3 7 4 AN7 CPS7 C12IN3- — — P1C(1)
CCP2(1)
P2A(1)
MDMIN Y —
RC4 6 3 C2OUT SRNQ P1B TX(1)
CK(1) MDOUT Y —
RC5 5 2 CCP1
P1A
RX(1)
DT(1) MDCIN2 Y —
RC6 8 5 AN8 CPS8 — — CCP4 SS — Y
RC7 9 6 AN9 CPS9 — — SDO — Y
VDD 118 — — VDD
VSS 20 20 VSS
Note 1: Pin functions can be assigned to one of two pin locations via software.
PIC12F1822/16F182X
DS41406B-page 8 Advance Information 2009 Microchip Technology Inc.
NOTES:
QUALITY MANAGEMENT SYSTEM CERTIFIED BY DNV = ISO/TS 16949:2002 =
2009 Microchip Technology Inc. Advance Information DS41406B-page 9
Information contained in this publication regarding device
applications and the like is provided only for your convenience
and may be superseded by updates. It is your responsibility to
ensure that your application meets with your specifications.
MICROCHIP MAKES NO REPRESENTATIONS OR
WARRANTIES OF ANY KIND WHETHER EXPRESS OR
IMPLIED, WRITTEN OR ORAL, STATUTORY OR
OTHERWISE, RELATED TO THE INFORMATION,
INCLUDING BUT NOT LIMITED TO ITS CONDITION,
QUALITY, PERFORMANCE, MERCHANTABILITY OR
FITNESS FOR PURPOSE. Microchip disclaims all liability
arising from this information and its use. Use of Microchip
devices in life support and/or safety applications is entirely at
the buyer’s risk, and the buyer agrees to defend, indemnify and
hold harmless Microchip from any and all damages, claims,
suits, or expenses resulting from such use. No licenses are
conveyed, implicitly or otherwise, under any Microchip
intellectual property rights.
Trademarks
The Microchip name and logo, the Microchip logo, dsPIC,
KEELOQ, KEELOQ logo, MPLAB, PIC, PICmicro, PICSTART,
rfPIC and UNI/O are registered trademarks of Microchip
Technology Incorporated in the U.S.A. and other countries.
FilterLab, Hampshire, HI-TECH C, Linear Active Thermistor,
MXDEV, MXLAB, SEEVAL and The Embedded Control
Solutions Company are registered trademarks of Microchip
Technology Incorporated in the U.S.A.
Analog-for-the-Digital Age, Application Maestro, CodeGuard,
dsPICDEM, dsPICDEM.net, dsPICworks, dsSPEAK, ECAN,
ECONOMONITOR, FanSense, HI-TIDE, In-Circuit Serial
Programming, ICSP, Mindi, MiWi, MPASM, MPLAB Certified
logo, MPLIB, MPLINK, mTouch, Octopus, Omniscient Code
Generation, PICC, PICC-18, PICDEM, PICDEM.net, PICkit,
PICtail, PIC32 logo, REAL ICE, rfLAB, Select Mode, Total
Endurance, TSHARC, UniWinDriver, WiperLock and ZENA
are trademarks of Microchip Technology Incorporated in the
U.S.A. and other countries.
SQTP is a service mark of Microchip Technology Incorporated
in the U.S.A.
All other trademarks mentioned herein are property of their
respective companies.
© 2009, Microchip Technology Incorporated, Printed in the
U.S.A., All Rights Reserved.
Printed on recycled paper.
ISBN: 978-1-60932-055-3
Note the following details of the code protection feature on Microchip devices:
Microchip products meet the specification contained in their particular Microchip Data Sheet.
Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the
intended manner and under normal conditions.
There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our
knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data
Sheets. Most likely, the person doing so is engaged in theft of intellectual property.
Microchip is willing to work with the customer who is concerned about the integrity of their code.
Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not
mean that we are guaranteeing the product as “unbreakable.
Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our
products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts
allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.
Microchip received ISO/TS-16949:2002 certification for its worldwide
headquarters, design and wafer fabrication facilities in Chandler and
Tempe, Arizona; Gresham, Oregon and design centers in California
and India. The Company’s quality system processes and procedures
are for its PIC® MCUs and dsPIC® DSCs, KEELOQ® code hopping
devices, Serial EEPROMs, microperipherals, nonvolatile memory and
analog products. In addition, Microchip’s quality system for the design
and manufacture of development systems is ISO 9001:2000 certified.
MICROCHIP AMERICAS ASIA/PACIFIC ASIA/PACIFIC EUROPE
DS41406B-page 10 Advance Information 2009 Microchip Technology Inc.
AMERICAS
Corporate Office
2355 West Chandler Blvd.
Chandler, AZ 85224-6199
Tel: 480-792-7200
Fax: 480-792-7277
Technical Support:
http://support.microchip.com
Web Address:
www.microchip.com
Atlanta
Duluth, GA
Tel: 678-957-9614
Fax: 678-957-1455
Boston
Westborough, MA
Tel: 774-760-0087
Fax: 774-760-0088
Chicago
Itasca, IL
Tel: 630-285-0071
Fax: 630-285-0075
Cleveland
Independence, OH
Tel: 216-447-0464
Fax: 216-447-0643
Dallas
Addison, TX
Tel: 972-818-7423
Fax: 972-818-2924
Detroit
Farmington Hills, MI
Tel: 248-538-2250
Fax: 248-538-2260
Kokomo
Kokomo, IN
Tel: 765-864-8360
Fax: 765-864-8387
Los Angeles
Mission Viejo, CA
Tel: 949-462-9523
Fax: 949-462-9608
Santa Clara
Santa Clara, CA
Tel: 408-961-6444
Fax: 408-961-6445
Toronto
Mississauga, Ontario,
Canada
Tel: 905-673-0699
Fax: 905-673-6509
ASIA/PACIFIC
Asia Pacific Office
Suites 3707-14, 37th Floor
Tower 6, The Gateway
Harbour City, Kowloon
Hong Kong
Tel: 852-2401-1200
Fax: 852-2401-3431
Australia - Sydney
Tel: 61-2-9868-6733
Fax: 61-2-9868-6755
China - Beijing
Tel: 86-10-8528-2100
Fax: 86-10-8528-2104
China - Chengdu
Tel: 86-28-8665-5511
Fax: 86-28-8665-7889
China - Hong Kong SAR
Tel: 852-2401-1200
Fax: 852-2401-3431
China - Nanjing
Tel: 86-25-8473-2460
Fax: 86-25-8473-2470
China - Qingdao
Tel: 86-532-8502-7355
Fax: 86-532-8502-7205
China - Shanghai
Tel: 86-21-5407-5533
Fax: 86-21-5407-5066
China - Shenyang
Tel: 86-24-2334-2829
Fax: 86-24-2334-2393
China - Shenzhen
Tel: 86-755-8203-2660
Fax: 86-755-8203-1760
China - Wuhan
Tel: 86-27-5980-5300
Fax: 86-27-5980-5118
China - Xiamen
Tel: 86-592-2388138
Fax: 86-592-2388130
China - Xian
Tel: 86-29-8833-7252
Fax: 86-29-8833-7256
China - Zhuhai
Tel: 86-756-3210040
Fax: 86-756-3210049
ASIA/PACIFIC
India - Bangalore
Tel: 91-80-3090-4444
Fax: 91-80-3090-4080
India - New Delhi
Tel: 91-11-4160-8631
Fax: 91-11-4160-8632
India - Pune
Tel: 91-20-2566-1512
Fax: 91-20-2566-1513
Japan - Yokohama
Tel: 81-45-471- 6166
Fax: 81-45-471-6122
Korea - Daegu
Tel: 82-53-744-4301
Fax: 82-53-744-4302
Korea - Seoul
Tel: 82-2-554-7200
Fax: 82-2-558-5932 or
82-2-558-5934
Malaysia - Kuala Lumpur
Tel: 60-3-6201-9857
Fax: 60-3-6201-9859
Malaysia - Penang
Tel: 60-4-227-8870
Fax: 60-4-227-4068
Philippines - Manila
Tel: 63-2-634-9065
Fax: 63-2-634-9069
Singapore
Tel: 65-6334-8870
Fax: 65-6334-8850
Taiwan - Hsin Chu
Tel: 886-3-6578-300
Fax: 886-3-6578-370
Taiwan - Kaohsiung
Tel: 886-7-536-4818
Fax: 886-7-536-4803
Taiwan - Taipei
Tel: 886-2-2500-6610
Fax: 886-2-2508-0102
Thailand - Bangkok
Tel: 66-2-694-1351
Fax: 66-2-694-1350
EUROPE
Austria - Wels
Tel: 43-7242-2244-39
Fax: 43-7242-2244-393
Denmark - Copenhagen
Tel: 45-4450-2828
Fax: 45-4485-2829
France - Paris
Tel: 33-1-69-53-63-20
Fax: 33-1-69-30-90-79
Germany - Munich
Tel: 49-89-627-144-0
Fax: 49-89-627-144-44
Italy - Milan
Tel: 39-0331-742611
Fax: 39-0331-466781
Netherlands - Drunen
Tel: 31-416-690399
Fax: 31-416-690340
Spain - Madrid
Tel: 34-91-708-08-90
Fax: 34-91-708-08-91
UK - Wokingham
Tel: 44-118-921-5869
Fax: 44-118-921-5820
WORLDWIDE SALES AND SERVICE
03/26/09