JPY | USD

CC Mid-Voltage 100V to 500V ~

Yageo

View All Related Products | Download PDF Datasheet

Datasheet

PRODUCT SELECTION GUIDE
2014
SMD RESISTORS + MLCC
SMD CERAMIC EMI FILTER CAPACITORS - X2Y
®
WIRELESS COMPONENTS
MULTILAYER CHIP VARISTORS
www.yageo.com
3
Part numbering system and ordering
You can order components from this catalogue in two ways. Both ways give logistic and packing information.
• Clear text ordering code
This unique number is an easily-readable code.
- 15 digits code (PHYCOMP CTC )
- 14 to 17 digits code (GLOBAL PART NUMBER for both Yageo and Phycomp branded products)
• 12 digits ordering code
This unique 12NC number forms the basis of the Phycomp logistic system.
Youwillfinddetailsfororderinginthe"Ordering" section next to each selection chart.
Minimum shipment quantities, prices and delivering details can be obtained from the Yageo sales organization in
your country or from one of our franchised distributors.
Case size codes
Throughout this catalogue, inch-based codes are used
for the component sizes. According to IEC 60384-10,
amendment 2 of September 2000 for MLCCs, and IEC
60115-8, amendment 1 of July 2000 for R-chip. Values
for length and width should be in millimeters rather than
in inches. To distinguish between inch-based codes and
metric-based codes, metric-based codes will temporarily
have the suffix ‘’M’’. The table right next shows the
relation between inch-based case sizes versus the
recommended metric case size designators. Please note
that HF products use metric case size only.
Contact us
Founded in 1977, the Yageo Corporation has become a world-class provider of passive-component services with
capabilities on a global scale, including production and sales facilities in Asia, Europe and America. The corporation
is uniquely positioned to provide one-stop-shopping, offering its complete product portfolio of resistors, capacitors
and inductors in both commodity and specialty versions, plus design-in capability, distribution, e-commerce
connection and logistics. Yageo markets its products under the product brand names Yageo, Phycomp and Vitrohm.
AllproductscanbeobtainedfromourYageosalesoffices,ofwhichcontactdetailscanbefoundonthebackcoverof
this catalogue. For most up-to-date information, as well as contact details of our franchise distributors, please refer to
our website: www.yageo.com
Case size designation and cross-reference
Inch-based Metric Inch-based Metric Inch-based Metric
0050 0201M 0606 1616M 1224 3250M
0075 03015M 0612 1632M 1225 3264M
01005 0402M 0616 1640M 1812 4532M
0201 0603M 0805 2012M 2007 5320M
0202 0605M 0815 2037M 2010 5025M
0402 1005M 0830 2075M 2220 5750M
0404 1010M 1008 2520M 2512 6432M
0408 1020M 1206 3216M 3014 7836M
0508 1220M 1210 3225M 4527 11070M
0603 1608M 1218 3245M
Preface
4
Table of Contents
Chip Resistors General Information 8
Specificationoverview 8
Ordering information - Global part number 13
Ordering information - North America 15
IEC publication 63, SPQ, last digit of 12NC 16
Chip Resistors Selection Charts 17
RC-Thickfilmchipresistors 17
RC-Thickfilmgeneralpurposechipresistors,01005to2512 17
RC-Thickfilmhighohmicchipresistors 22
RC-Thickfilmhighohmicchipresistors,0805/1206 22
RE-Thickfilmprecisiongradechipresistors 24
RE-Thickfilmprecisiongradechipresistors,0402to1206 24
RT-Thinfilmhighprecisionhighstabilitychipresistors 27
RT-Thinfilmhighprecisionhighstabilitychipresistors,0402to2512 27
YC/TC-Thickfilmarray/networkchipresistors 31
YC/TC-Thickfilmarray/networkchipresistors 31
YC/TC-Arrays,convex/concave/flat 33
YC-Networks,T-type/L-type 34
RL-Thickfilmlowohmicchipresistors 35
RL-Thickfilmlowohmicchipresistors,0402to2512 35
RL-Thickfilmlowohmic,highpowerchipresistors,0402/1206 39
PT-ThickfilmlowohmiclowT.C.R.chipresistors 40
PT-ThickfilmlowohmiclowT.C.R.chipresistors,0402to2512 40
PT-ThickfilmlowohmiclowT.C.R.chipresistors,widetermination 43
PT-ThickfilmlowohmiclowT.C.R.chipresistors,widetermination,0815 43
PR/PA/PF/PH/PE-Currentsensors-lowT.C.R.chipresistors 46
PR/PA/PF/PH/PE-Currentsensors-lowT.C.R.chipresistors,0402to4527 46
PE/PF-Currentsensors-lowT.C.R.chipresistors,widetermination 51
PE/PF-Currentsensors-lowT.C.R.chipresistors,widetermination,0612to0830 51
PS - Current sensors - low T. C. R. chip resistors, 4 termination 54
PS - Current sensors - low T. C. R. chip resistors, 4 termination, 0306 to 1225 54
AR - NiAu termination chip resistors 57
AR - NiAu termination chip resistors, 0402 to 1206 57
SR - Surge chip resistors 60
SR - Surge chip resistors, 0402 to 2512 60
RV - High voltage chip resistors 63
RV - High voltage chip resistors, 0603 to 2512 63
TR - Trimmable chip resistors 66
TR - Trimmable chip resistors, 0402 to 1206 66
AF - Sulfur resistant chip resistors 69
AF - Sulfur resistant chip resistors, 0201 to 2512 69
AF - Sulfur resistant chip resistors, Arrays 72
AC - Automotive grade chip resistors 75
AC - Automotive grade chip resistors, 0402 to 2512 75
AT - RF attenuator chip resistors 78
AT - RF attenuator chip resistors, 0404 78
5
Table of Contents
Chip Resistors Engineering Design Kits 81
Engineering design kits 81
Engineering design books 81
MLCC General Information 84
Specificationoverview 84
Ordering information - Global part number 85
Thickness classes and packing quantities for all series 87
MLCC Selection Charts 88
NP0 - General purpose 88
NP0 - General purpose 16 to 50V, 01005 to 0603 89
NP0 - General purpose 16 to 50V, 0805 to 1812 91
NP0 - Medium & High voltage 93
NP0 - Medium voltage, 0402 to 0805 94
NP0-Mediumvoltage,1206/1210 95
NP0 - High voltage, 0805 to 1210 96
NP0-Highvoltage,1808/1812 97
NP0 - High frequency 98
NP0 - High frequency, 01005 to 0805 98
X7R - General purpose & High capacitance 100
X7R - General purpose & High capacitance, 01005 to 0402 101
X7R-Generalpurpose&Highcapacitance,0603/0805 102
X7R - General purpose & High capacitance, 1206 to 2220 103
X7R - Medium & High voltage 104
X7R - Medium voltage & High voltage, 0402 to 0805 105
X7R - Medium voltage &Highvoltage,1206/1210 106
X7R - Medium voltage &Highvoltage,1808/1812 107
X7R/X5R-Lowinductance 108
X7R/X5R - Low inductance, 0306 to 0612 108
X7R - Soft termination 110
X7R-Softtermination,0603/0805 111
X7R - Soft termination, 1206 112
X7R-Softtermination,1210/1812 113
X5R - General purpose & High capacitance 114
X5R - General purpose & High capacitance, 01005 to 0402 115
X5R-Generalpurpose&Highcapacitance,0603/0805 116
X5R - High capacitance & High capacitance, 1206 117
X5R-Highcapacitance,1210/1812 118
Y5V - General purpose & High capacitance 119
Y5V-Generalpurpose&Highcapacitance6.3to25V,0201/0402 120
Y5V-Generalpurpose&Highcapacitance6.3to25V,0603/0805 121
Y5V-Generalpurpose&Highcapacitance6.3to25V,1206/1210 122
Y5V - General purpose & High capacitance 50V, 0402 to 1206 123
Automotive grade MLCCs 124
NP0 - Automotive grade, 0402 to 0805 125
NP0-Automotivegrade,1206/1210 126
X7R-Automotivegrade,0402/0603 127
X7R - Automotive grade, 0805 128
6
Table of Contents
X7R - Automotive grade, 1206 129
X7R - Automotive grade, 1210 130
SafetycertificationMLCCs 131
NPO-HighvoltageSCtype,1808/1812 131
X7R-HighvoltageSCtype,1808/1812 132
Arrays 133
NPO/X7R/Y5V-4CArrays,0508/0612 133
NPO-4CArrays,0508/0612 135
X7R-4CArrays,0508/1612 136
Y5V - 4C Arrays, 0612 137
MLCC Engineering Design Kits 138
Samplekitsfor0201/0402 138
Samplekitsfor0603/0805 139
Sample kits for 1206 140
Sample kits for high capacitance series 141
High voltage sample kits for general applications 142
Sample kits for high frequency series 143
X2Y® Product Selection Charts 146
SMDceramicEMIfiltercapacitorsX2Y® series 146
Ordering information 147
Wireless Components Selection Charts 152
Introduction 152
Key features of Wireless Components 153
Product Information 154
Antenna - 2.4 GHz 154
Antenna-2.4/5GHz 155
Antenna-CellularWWAN/ShortRange 156
Antenna - GPS 157
Antenna-GPS/Glonass/ActiveAntenna 159
Antenna - Others 160
Filters 161
Ordering Information 164
Wireless Components Engineering Design Kits 166
Sample Kit 166
MLV Product Selection Charts 168
Specificationfor0402 169
Specificationfor0603 170
Specificationfor0805 171
Specificationfor1206 172
Ordering information for 0402 to 1206 173
SURFACE-MOUNT CHIP RESISTORS
8
Chip Resistors General Information
Specification overview
Global part number Series Size Power
rating Max.
voltage Operating
Temp. range Resistance
range Tolerance T. C. R.
RC0100xR-07xxxxL
RC
01005 1/32W 15V
-55°C to 125°C
1Ω≤R≤1M
Ω
Jumper < 50m
Ω
±1%
±5% 1
Ω
≤R≤10
Ω
10
Ω
≤R≤1M
Ω
-200~600ppm/°C
±250ppm/°C
RC0201xR-07xxxxL
0201 1/20W 25V 1
Ω
≤R≤10M
Ω
Jumper < 50m
Ω
Max./Min.:1M
Ω
/10
Ω
Max.: 10M
Ω
±0.5%
±1%,±5% 1
Ω
≤R≤10
Ω
10
Ω
<R≤10M
Ω
-100/+350ppm/°C
±200ppm/°C
RC0402xR-07xxxxL
0402 1/16W 50V
-55°C to 155°C
1
Ω
≤R≤22M
Ω
Jumper < 50m
Ω
Max./Min.:1M
Ω
/10
Ω
Max.: 10M
Ω
Max.: 22M
Ω
±0.1%
±0.5%
±1%
±5%
1
Ω
≤R≤10
Ω
10
Ω
<R≤10M
Ω
10M
Ω
<R≤22M
Ω
±200ppm/°C
±100ppm/°C
±200ppm/°C
RC0603xR-07xxxxL
0603 1/10W 50V
RC0805xR-07xxxxL
0805 1/8W 150V
RC1206xR-07xxxxL
1206 1/4W 200V
RC1210xR-07xxxxL
1210 1/2W 200V
RC1218xK-07xxxxL
1218 1W 200V 1
Ω
≤R≤1M
Ω
Jumper < 50m
Ω
RC2010xK-07xxxxL
2010 3/4W 200V 1
Ω
≤R≤22M
Ω
Jumper < 50m
Ω
RC2512xK-07xxxxL
2512 1W 200V
RC0603xR-7WxxxxL
0603 1/5W 50V
-55°C to 155°C
1
Ω
≤R≤1MΩ
±1%
±5% ±200ppm/°C
RC0805xR-7WxxxxL
0805 1/4W 150V 1
Ω
≤R≤1M
Ω
RC1206xR-7WxxxxL
1206 1/2W 200V
RC2512xK-7WxxxxL
2512 2W 200V 1
Ω
≤R≤150
Ω
RC0805xR-07xxxxL
0805 1/8W 150V 24M
Ω
≤R≤100M
Ω
±5%, ±10%, ±20% ±300ppm/°C
RC1206xR-07xxxxL
1206 1/4W 200V 24M
Ω
≤R≤100M
Ω
RE0402xRE07xxxxL
RE
0402 1/16W 50V
-55°C to 155°C
10
Ω
≤R≤1M
Ω
±0.1%
±0.5%
±1% ±50ppm/°C
RE0603xRE07xxxxL
0603 1/10W 50V 10
Ω
≤R≤1M
Ω
RE0805xRE07xxxxL
0805 1/8W 150V 10
Ω
≤R≤1M
Ω
RE1206xRE07xxxxL
1206 1/4W 200V 10
Ω
≤R≤1M
Ω
RT0402xRx07xxxxL
RT
0402 1/16W 50V
-55°C to 155°C
10
Ω
≤R≤121K
Ω
±0.05%
±0.1%
±0.25%
±0.5%
±1%
±10ppm/°C
±15ppm/°C
±25ppm/°C
±50ppm/°C
RT0603xRx07xxxxL
0603 1/10W 75V 5.1
Ω
≤R≤681KΩ
RT0805xRx07xxxxL
0805 1/8W 150V 5.1
Ω
≤R≤1.5M
Ω
RT1206xRx07xxxxL
1206 1/4W
200V
5.1
Ω
≤R≤1.5M
Ω
RT1210xRx07xxxxL
1210 1/4W
-55°C to 125°C
5.1
Ω
≤R≤1M
Ω
RT2010xKx07xxxxL
2010 1/2W 10
Ω
≤R≤1M
Ω
RT2512xKx07xxxxL
2512 3/4W 10
Ω
≤R≤1M
Ω
YC102-xR-07xxxxL
YC
2*0201 1/32W 15V
-55°C to 125°C
10
Ω
≤R≤1M
Ω
Jumper < 50m
Ω
±1%
±5% ±200ppm/°C
YC104-xR-07xxxxL
4*0201 1/32W 12.5V
YC122-xR-07xxxxL
2*0402 1/16W 50V 1
Ω
≤R≤1M
Ω
Jumper < 50m
Ω
Max./Min.:1M
Ω
/10
Ω
Max.: 1M
Ω
±1%
±5%
YC124-xR-07xxxxL
4*0402 1/16W 25V -55°C to 155°C 1
Ω
≤R≤1M
Ω
Jumper < 50m
Ω
±1%
±5% 1
Ω
≤R<10
Ω
10
Ω
≤R≤1M
Ω
±250ppm/°C
±200ppm/°C
YC162-xR-07xxxxL
2*0603 1/16W 50V -55°C to 125°C 10
Ω
≤R≤1M
Ω
Jumper < 50m
Ω
±5%
±200ppm/°C
YC164-xR-07xxxxL
4*0603 1/16W 50V
-55°C to 155°C
1
Ω
≤R≤1M
Ω
Jumper < 50m
Ω
±1%
±5%
YC248-xR-07xxxxL
8*0602 1/16W 50V 10
Ω
≤R≤1M
Ω
Jumper < 50m
Ω
YC324-xK-07xxxxL
4*1206 1/8W 200V 10
Ω
≤R≤1M
Ω
TC122-xR-07xxxxL
TC
2*0402 1/16W 50V
-55°C to 125°C 10
Ω
≤R≤1M
Ω
Jumper < 50m
Ω
±1%
±5% ±200ppm/°C
!
TC122HxR-07xxxxL
!
TC122MxR-07xxxxL
TC124-xR-07xxxxL
4*0402 1/16W 50V
!
TC124HxR-07xxxxL
!
TC124MxR-07xxxxL
TC164-xR-07xxxxL
4*0603 1/16W 50V 1
Ω
≤R≤1M
Ω
Note: " ! "isthesymbolfornewproduct
9
Chip Resistors General Information
Specification overview
Global part number Series Size Power
rating Max.
voltage Operating
Temp. range Resistance
range Tolerance T. C. R.
YC158TJR-07xxxxL
YC158 10P8R
(0612) 1/16W 25V -55°C to 155°C 10
Ω
≤R≤100K
Ω
±5%
±200ppm/°C
YC358xJK-07xxxxL
YC358 10P8R
(1225) 1/16W 50V 10
Ω
≤R≤330K
Ω
±200ppm/°C
RL0402xR-07xxxxL
RL
0402 1/16W
(PxR)^1/2 -55°C to 125°C
50mΩ≤R<1Ω
Jumper<20mΩ
±1%
±2%
±5%
See page 36,
table “T. C. R. - RL series“
RL0603xR-07xxxxL 0603 1/10W
10m
Ω
≤R<1
Ω
Jumper<20mΩ
RL0805xR-07xxxxL 0805 1/8W
RL1206xR-07xxxxL 1206 1/4W
RL1210xR-07xxxxL 1210 1/2W
10m
Ω
≤R<1
Ω
RL1218xK-07xxxxL 1218 1W
RL2010xK-07xxxxL 2010 3/4W
RL2512xK-07xxxxL 2512 1W
RL0805xR-7WxxxxL 0805 1/4W
10m
Ω
≤R<1
Ω
RL1206xR-7WxxxxL 1206 1/2W
PT0402xR-07xxxxL
PT
0402 1/16W
(PxR)^1/2 -55°C to 155°C
50m
Ω
≤R<1
Ω
Jumper<10mΩ
±1%
±2%
±5%
See page 41,
table"T.C.R.-PTseries"
PT0603xR-07xxxxL 0603 1/10W 50m
Ω
≤R<1
Ω
Jumper<8mΩ
PT0805xR-07xxxxL 0805 1/8W 50m
Ω
≤R<1
Ω
Jumper<5mΩ
PT1206xR-07xxxxL 1206 1/4W
PT2010xK-07xxxxL 2010 3/4W
100m
Ω
≤R<1
Ω
PT2512xK-07xxxxL 2512 1W
PT0402xR-7WxxxxL 0402 1/8W
50m
Ω
≤R<1
Ω
PT0603xR-7WxxxxL 0603 1/5W
PT0805xR-7WxxxxL 0805 1/4W
PT1206xR-7WxxxxL 1206 1/2W
PT2010xK-7WxxxxL 2010 1W 100m
Ω
≤R<1
Ω
PT2512xK-7WxxxxL 2512 2W
PT0402xR-7TxxxxL 0402 1/6W
68
m
Ω
PT0603xR-7TxxxxL 0603 1/3W 50m
Ω
≤R≤68m
Ω
PT0815xK-07xxxxL PT
(Wide) 0815
1/2W
(PxR)^1/2 -55°C to 155°C 25m
Ω
≤R≤50m
Ω
±1%
±2%
±5% ±100ppm/°C
PT0815xK-7WxxxxL 1W
Note: ! “ is the symbol for new product
10
Chip Resistors General Information
Specification overview
Global part number Series Size Power
rating Max.
voltage Operating
Temp. range Resistance
range Toler-
ance T. C. R.
PR1206xKx07xxxxxx
PR
1206
1/4W
(PxR)^1/2 -55°C to 170°C
1m
Ω
≤R≤6m
Ω
±1%
±2%
±5% ±50ppm/°C
PR1206xKx7Wxxxxxx 1/2W
PR1206xKx47xxxxxx
1W
PR2010xKx07xxxxxx 2010 1/2W 1m
Ω
≤R<100m
Ω
PR2010xKx7Wxxxxxx 1W
PR2512xKx07xxxxxx
2512
1W 0.5m
Ω
≤R≤5m
Ω
±1%
±2%
±5%
0.5mΩ≤R≤2mΩ
3mΩ≤R≤5mΩ
±200ppm/°C
±100ppm/°C
PR2512xKx7Wxxxxxx 2W
PR2512xKx7Txxxxxx 3W 0.5m
Ω
≤R≤10m
Ω
±50ppm/°C
PR2512DKx07xxxxxx 1W 7m
Ω
≤R≤75m
Ω
±0.5%
PR2512DKx7Wxxxxxx 2W
PA2512xKF07xxxxL
PA 2512
1W
(PxR)^1/2 -55°C to 155°C 1m
Ω
≤R≤10m
Ω
±1%
±5% ±100ppm/°C
PA2512xKF7WxxxxL 2W
PA2512xKF7TxxxxL 3W
!
PF0402xRx07xxxxxx
PF
0402
1/16W
(PxR)^1/2
-55°C to 155°C
10mΩ
R
50mΩ
±1%
±2%
±5%
±100ppm/°C
!
PF0402xRx7Wxxxxxx 1/8W
!
PF0402xRx47xxxxxx 1/4W
PF0603xRx07xxxxxx
0603
1/10W
-55°C to 170°C
5mΩ
R
100mΩ
±50ppm/°C
±75ppm/°C
±100ppm/°C
PF0603xRx7Wxxxxxx 1/5W
PF0603xRx7Txxxxxx 1/3W
PF0603xRx47xxxxxx 2/5W
PF0603xRx57xxxxxx 1/2W
PF0805xRx07xxxxxx
0805
1/8W
3mΩ
R
100mΩ
PF0805xRx7Wxxxxxx 1/4W
PF0805xRx7Txxxxxx
1/3W
PF0805xRx47xxxxxx 1/2W
PF1206xxx07xxxxxx
1206
1/4W
3mΩ≤R
100mΩ
PF1206xxx7Wxxxxxx
1/2W
PF1206xxx47xxxxxx
1W
PF2010xKx07xxxxxx
2010 1/2W
5mΩ≤R≤100mΩ
PF2010xKx7Wxxxxxx
1W
PF2512xKx07xxxxxx
2512
1W
6mΩ≤R≤100mΩ
PF2512xKx7Wxxxxxx
2W
PF2512xKx7Txxxxxx
3W
PF4527xKx07xxxxxx
4527
2W
5mΩ≤R≤1ΩPF4527xKx7Wxxxxxx
3W
PF4527xKx7Txxxxxx
5W
PF4527xKx7Wxxxxxx
4527 3W
5mΩ≤R≤1Ω
±1%
±2%
±5%
±50ppm/°C
±75ppm/°C
±100ppm/°C
PF4527xKx7Txxxxxx
5W
PF0612xKx07xxxxxx
PF
(Wide)
0612 1W
(PxR)^1/2
-55°C to 170°C
1mΩ≤R≤300mΩ
±1%
±2%
±5%
±75ppm/°C
±100ppm/°C
PF0612xKx7Wxxxxxx
2W
PF0815xKx07xxxxxx
0815 1/2W
1mΩ≤R≤100mΩ
PF0815xKx7Wxxxxxx
1W
PF0830xKx07xxxxxx
0830 2W
1mΩ≤R≤100mΩ
PF0830xKx7Wxxxxxx
3W
11
Global part number Series Size Power
rating Max.
voltage Operating
Temp. range Resistance
range Toler-
ance T. C. R.
!
PE0612xKx07xxxxxx
PE
(Wide)
0612 1W
(PxR)^1/2
-55°C to 170°C
1mΩ≤R≤300mΩ
±1%
±2%
±5%
±75ppm/°C
±100ppm/°C
!
PE0612xKx7Wxxxxxx
2W
!
PE0815xKx07xxxxxx
0815 1/2W
1mΩ≤R≤100mΩ
!
PE0815xKx7Wxxxxxx
1W
!
PE0830xKx07xxxxxx
0830 2W
1mΩ≤R≤100mΩ
!
PE0830xKx7Wxxxxxx
3W
PH0805xRx07xxxxxx PH 0805 4/5W
(PxR)^1/2 -55°C to 155°C
4mΩ≤R≤50mΩ
±1%
±2%
±5% ±75ppm/°C
PH1206xRx07xxxxxx 1206 1W
!
PE0402xRx07xxxxxx
PE
0402
1/16W
(PxR)^1/2
-55°C to 155°C
10mΩ≤R≤50mΩ
±1%
±2%
±5%
±100ppm/°C
!
PE0402xRx7Wxxxxxx
1/8W
!
PE0402xRx47xxxxxx
1/4W
PE0603xRx07xxxxxx
0603
1/10W
-55°C to 170°C
5mΩ≤R≤100mΩ
±50ppm/°C
±75ppm/°C
±100ppm/°C
PE0603xRx7Wxxxxxx
1/5W
PE0603xRx7Txxxxxx
1/3W
PE0603xRx47xxxxxx
2/5W
PE0603xRx57xxxxxx
1/2W
PE0805xRx07xxxxxx
0805
1/8W
3mΩ≤R≤100mΩ
PE0805xRx7Wxxxxxx
1/4W
PE0805xRx7Txxxxxx
1/3W
PE0805xRx47xxxxxx
1/2W
PE1206xxx07xxxxxx
1206
1/4W
3mΩ≤R≤100mΩ
PE1206xxx7Wxxxxxx
1/2W
PE1206xxx47xxxxxx
1W
!
PE2010xKx07xxxxxx
2010 1/2W
5mΩ≤R≤100mΩ
!
PE2010xKx7Wxxxxxx
1W
!
PE2512xKx07xxxxxx
2512
1W
6mΩ≤R≤100mΩ
PE2512xKx7Wxxxxxx
2W
!
PE2512xKx7Txxxxxx
3W
!
PE4527xKx07xxxxxx
4527
2W
5mΩ≤R
<
!
PE4527xKx7Wxxxxxx
3W
!
PE4527xKx7Txxxxxx
5W
!
PS0306xRx07xxxxxx
PS
(4 Terminal)
0306 1/8W
(PxR)^1/2
-55°C to 155°C
10mΩ≤R≤50mΩ
±1%
±5%
±75ppm/°C
±100ppm/°C
!
PS0306xRx7Wxxxxxx
1/4W
!
PS0508xRx07xxxxxx
0508
1/8W
-55°C to 170°C
!
PS0508xRx7Wxxxxxx
1/4W
!
PS0508xRx7Txxxxxx
1/2W
!
PS0612xKx07xxxxxx
0612 1W
0.5mΩ,0.75mΩ
1mΩ≤R≤5mΩ
0.5mΩ,0.75mΩ
1mΩ≤R≤2mΩ
3mΩ≤R≤5mΩ
±700ppm/°C
±400ppm/°C
±150ppm/°C
!
PS1225xKx07xxxxxx
1225 3W
4mΩ≤R≤50mΩ ±75ppm/°C
±100ppm/°C
Note: ! “ is the symbol for new product
Chip Resistors General Information
Specification overview
12
Chip Resistors General Information
Specification overview
Global part number Series Size Power
rating Max.
voltage Operating
Temp. range Resistance
range Tolerance T. C. R.
AR0402xR-07xxxxL
AR
0402 1/16W 50V
-55°C to 155°C 1
Ω
≤R≤10M
Ω
Jumper < 50m
Ω
±1%
±5% 1Ω≤R≤10
Ω
10Ω<R≤10M
Ω
±200ppm/°C
±100ppm/°C
AR0603xR-07xxxxL
0603 1/10W 50V
AR0805xR-07xxxxL
0805 1/8W 150V
AR1206xR-07xxxxL
1206 1/4W 200V
!
SR0402xR-07xxxxL
SR
0402 1/16W 50V
-55°C to 155°C 1
Ω
≤R≤100K
Ω
±5%
±10%
±20% ±200ppm/°C
!
SR0402xR-7WxxxxL
1/8W
!
SR0603xR-07xxxxL
0603 1/10W 50V
!
SR0603xR-7WxxxxL
1/5W
SR0805xR-07xxxxL
0805 1/8W 150V
!
SR0805xR-7WxxxxL
1/4W
SR1206xR-07xxxxL
1206 1/4W 200V
!
SR1206xR-7WxxxxL
1/2W
SR1218xK-07xxxxL
1218 1W 200V
SR2010xK-07xxxxL
2010 3/4W 200V
SR2512xK-07xxxxL
2512 1W 200V
!
RV0603xR-07xxxxL
RV
0603 1/10W 350V
-55°C to 155°C
10KΩ≤R≤1MΩ ±1%
±5%
±200ppm/°C
RV0805xR-07xxxxL
0805 1/8W 400V 100K
Ω
≤R≤10M
Ω
RV1206xR-07xxxxL
1206 1/4W 500V 100K
Ω
≤R≤27M
Ω
Max.: 10M
Ω
Max.: 27M
Ω
±1%
±5%
RV2512JK-07xxxxL
2512 1W 4.7M
Ω
≤R≤16M
Ω
±5%
TR0402xR-07xxxxL
TR
0402 1/16W 50V -55°C to 125°C
1
Ω
≤R≤10M
Ω
+0/-10%
+0/-20%
+0/-30%
1
Ω
≤R≤10
Ω
10
Ω
<R≤1M
Ω
1M
Ω
<R≤10M
Ω
±200ppm/°C
±100ppm/°C
±200ppm/°C
TR0603xR-07xxxxL
0603 1/16W
TR0805xR-07xxxxL
0805 1/8W 150V -55°C to 155°C
TR1206xR-07xxxxL
1206 1/4W 200V
!
AF0201xR-07xxxxL
0201 1/20W 25V -55°C to 125°C
≤
R
≤
10MΩ
Jumper<50mΩ
±1%
±5%
≤
R
≤
10Ω
10Ω
<
R
≤
10MΩ
-100/+350ppm/°C
±200ppm/°C
AF0402xRx-07xxxxL
0402 1/16W 50V
-55°C to 155°C
≤
R
≤
22MΩ
Jumper<50mΩ
Max:10MΩ±1%
Max:22MΩ±5%
≤
R
≤
10Ω
10Ω
<
R
≤
10MΩ
10MΩ
<
R
≤
22MΩ
±200ppm/°C
±100ppm/°C
±200ppm/°C
AF0603xRx-07xxxxL
0603 1/10W 50V
AF0805xRx-07xxxxL
0805 1/8W 150V
AF1206xRx-07xxxxL
1206 1/4W 200V
!
AF1210xRx-07xxxxL
1210 1/2W 200V
≤
R
≤
10MΩ
Jumper<50mΩ
±1%
±5%
≤
R
≤
10Ω
10Ω
<
R
≤
10MΩ
±200ppm/°C
±100ppm/°C
!
AF1218xKx-07xxxxL
1218 1W 200V
!
AF2010xKx-07xxxxL
2010 3/4W 200V
!
AF2512xKx-07xxxxL
2512 1W 200V
!
AF122-xR-07xxxxL
2*0402 1/16W 50V -55°C to 125°C 1
Ω
≤R≤1M
Ω
Jumper < 50m
Ω
±1%
±5% 1
Ω
≤R≤10
Ω
10
Ω
<R≤1M
Ω
±250ppm/°C
±200ppm/°C
!
AF124-xR-07xxxxL
4*0402 1/16W 25V -55°C to 155°C
AC0402xR-07xxxxL
AC
0402 1/16W 50V
-55°C to 155°C
1
Ω
≤R≤10M
Ω
Jumper < 50m
Ω
±1%
±5% 1
Ω
≤R≤10
Ω
10
Ω
<R≤10M
Ω
±200ppm/°C
±100ppm/°C
AC0603xR-07xxxxL
0603 1/10W 50V
AC0805xR-07xxxxL
0805 1/8W 150V
AC1206xR-07xxxxL
1206 1/4W 200V
AC1210xR-07xxxxL
1210 1/2W 200V
AC1218xK-07xxxxL
1218 1W 200V 1
Ω
≤R≤1M
Ω
Jumper < 50m
Ω
AC2010xK-07xxxxL
2010 3/4W 200V 1
Ω
≤R≤10M
Ω
Jumper < 50m
Ω
AC2512xK-07xxxxL
2512 1W 200V
ATV321xR-07xxxxL
AT 0404 40mW 50V -55°C to 125°C -1dB to -20dB
±0.3dB
±0.5dB
±1.0dB
±2.0dB
---
Note: " ! "isthesymbolfornewproduct
13
Global part number - Single resistor (3)
R C 0 4 02 J R 7 D 1 0 R L
Series name (code 1-2) Default code(1/2) (code 17)
RC=Thickfilmgeneralpurpose
RE=Thickfilmprecisiongrade Resistance (code 12-16)
RT=Thinfilmhighprecisionhighstability 0R = Jumper
RL =Thickfilmlowohmic 0U5=0.0005Ω
PT =ThickfilmlowohmiclowT.C.R. 0R1 =0.1Ω
PR/PA/PF/PH/PE=Currentsensor-lowT.C.R. 1R =1Ω
PS = Current sensor - low T.C.R, 4 termination 10R =10Ω
TR = Trimmable 100R=100Ω
SR = Surge 1K =1000Ω
AR = NiAu termination 1M =1000000Ω
RV = High voltage 100M=100000000Ω
AF = Sulfur resistant
AC = Automotive grade
Taping reel (code 10-11)
07 = 7 inch Dia. reel
10 = 10 inch Dia. reel
Size code (code 3-6) 13 = 13 inch Dia. reel
(inch/metric) 7D = 7 inch Dia. reel
2 x standard quantity
0100 = 0.4 x 0.2
0201 = 0.6 x 0.3
0402 = 1.0 x 0.5 T. C. R. (code 9)
0603 = 1.6 x 0.8 B=±10ppm/°C(onrequest)
0612 = 1.6 x 3.2 C=±15ppm/°C(onrequest)
0805 = 2.0 x 1.25 D=±25ppm/°C
0815 = 2.15 x 3.75 E=±50ppm/°C
0830 = 2.0 x 7.5 M=±75ppm/°C
1206 = 3.2 x 1.6 F =±100ppm/°C
1210 = 3.2 x 2.6 L=±150ppm/°C
1218 = 3.2 x 4.5 G=±200ppm/°C
2010 = 5.0 x 2.5 P=±400ppm/°C
2512 = 6.35 x 3.2 Q=±700ppm/°C
4527 = 11.0 x 7.0 “―”=Basedonspec.
(―forthickfilmonly)
Packing style (code 8 )
R = Paper tape reel
Tolerance (code 7) K = Embossed plastic tape reel
W = ±0.05% C = Bulk cassette
B = ±0.1% S = ESD safe reel
C = ±0.25%
D = ±0.5%
F = ±1%
G = ±2%
J=±5%(forRC/AR/AF/ACJumperordering)
K=±10%(forTR=0/-10%)
M=±20%(forTR=0/-20%)
N=±30%(forTR=0/-30%)
“―”forRL/PTJumperordering
Note:1.AllofourRSMDproductsareRoHScompliant."LFP"oftheinternal2Dreellabelmentions"LeadFreeProcess"
2. Letter L is system default code for ordering only
3. Global Part Number is the preferred clear text code for ordering Yageo and Phycomp branded products.
Chip Resistors General Information
Ordering information - Global part number
14
Global part number - Power enhancement
R L 0 8 0 5 J R 7 W 0 R 0 1 5 L
Series name (code 1-2) Default code (code 17)
RC=Thickfilmgeneralpurpose L/Z=Defaultcode
RL=Thickfilmlowohmic
PT=ThickfilmlowohmiclowT.C.R. Resistance (code 12-16)
PR/PA/PF/PE=Currentsensor-lowT.C.R. 0U5=0.0005Ω
PS = Current sensor - low T.C.R, 4 termination 0R01=0.01Ω
0R1 =0.1Ω
Size code (code 3-6)
(inch/metric) Taping reel (code 10-11)
0306 = 0.8 x 1.6 07 = 7 inch Dia. reel
0508 = 1.25 x 2.0 7W = 7 inch Dia. reel
0612 = 1.6 x 3.2 2 x standard power type
0805 = 2.0 x 1.25 7T = 7 inch Dia. reel
0815 = 2.15 x 3.75 3 x standard power type
1206 = 3.2 x 1.6 47 = 7 inch Dia. reel
1225 = 3.2 x 6.35 4 x standard power type
2010 = 5.0 x 2.5 57 = 7 inch Dia. reel
2512 = 6.35 x 3.2 5 x standard power type
4527 = 11.0 x 7.0 T. C. R. (code 9)
Tolerance (code 7) E=±50ppm/°C
F = ±1% M=±75ppm/°C
G = ±2% F=±100ppm/°C
J = ±5% G=±200ppm/°C
“―”=Basedonspec.
Packing style (code 8 ) (―forthickfilmonly)
R = Paper tape reel
K = Embossed plastic tape reel
Global part number - Arrays & Networks
Y C 1 6 4 J R 0 7 1 0 R L
Series name (code 1-2) Default code (code 17)
YC = Array & Network
(convex/flat)thickfilm
TC=Array(concave)thickfilm Resistance (code 12-16)
AF=Sulfurresistantarray(Convex)thickfilm 0R = Jumper
0R1 =0.1Ω
Size code (inch) (code 3-4) 1R =1Ω
10 = 0201 x 2 (0202) 10R =10Ω
0201 x 4 (0204) 100R=100Ω
12 = 0402 x 2 (0404) 1K =1000Ω
0402 x 4 (0408) 1M = 100 000 000
15=10Pin/8R(0612)
16 = 0603 x 2 (0606) Taping reel (code 10-11)
0603 x 4 (0612) 07 = 7 inch Dia. reel
24 = 0602 x 8 (0616) 10 = 10 inch Dia. reel
32 = 1206 x 4 (1224) 13 = 13 inch Dia. reel
35=10Pin/8R(1225) T.C.R. (code 9)
Number of resistors (code 5) "―"=Basedonspec.
2 = 2 resistors
4 = 4 resistors Packing style (code 8 )
8 = 8 resistors R = Paper tape reel
K = Embossed plastic tape reel
Schematic (code 6)
L = L-type (for YC358) Tolerance (code 7)
T=T-type(forYC158/358) F = ±1%
M = Reverse type J = ±5% (for Jumper ordering)
H = Reverse & Half type
“―”=Basedonspec.
Chip Resistors General Information
Ordering information - Global part number
15
Phycomp CTC ordering code - North America
Ordering example: 9C06031A10R0FKHFT = R-Chip 0603, 10R0, 1%, 5K reel
1-2 3-6 7-8 9-12 13 14 15-16 17
X X X X X X X X X X X X X X X X X
Series name (code 1-2) Packing style (code 17 )
9C=Phycompthickfilmchipresistors T = 5K paper
9T =Phycompthinfilmchipresistors 3 = 10K paper
4 = 20K paper
Size code (standard resistors, code 3-6) 5 = 4K blister
0201 0201 (0603) 6 = 5K blister
0402 0402 (1005) 7 = 50K paper
0603 0603 (1608) P = 25K bulk case
0805 0805 (2012)
1206 1206 (3216) Special coding (code 15-16)
1210 1210 (3225) HF = SnPb
1218 1218 (3248) PF = Lead-free
2010 2010 (5025) AF = NiAu
2512 2512 (6432)
AC34 0603 (1608) 4R concave array T. C. R. (code 14)
AV34 0603 (1608) 4R convex array C=±10ppm/°C
AV22 0402 (1005) 2R convex array D=±15ppm/°C
AV24 0402 (1005) 4R convex array A=±25ppm/°C
AV28 0402 (1005) 8R convex array B=±50ppm/°C
RN31 10P8R in 1206 convex network K=±100ppm/°C
FR01 1206 (3216) Fusible L =±200ppm/°C
FR21 0603 (1608) Fusible E=±250ppm/°C
SR01 1206 (3216) Surge M=±300ppm/°C
VR01 1206 (3216) High voltage 5% G=±500ppm/°C
VR02 1206 (3216) High voltage 1% F=0/+500ppm/°C
VR11 0805 (2012) High voltage 5% R=±600ppm/°C
VR12 0805 (2012) High voltage 1% Q=-100/+600ppm/°C
VR21 2512 (6432) High voltage 5% P =±750ppm/°C
MR22 2512 (6432) Current sensor - low T. C. R. H =±1000ppm/°C
MF22 2512 (6432) Current sensor - low T. C. R.  I=±1500ppm/°C
V321 0404 (1010) RF attenuator J=±2000ppm/°C
N =±3000ppm/°C
Power rating (code 7-8)
1A 1/16W 0.063W (0402) Tolerance (code 13)
1A 1/10W 0.10W (0603) E = ±0.01%
2A 1/8W 0.125W (0805) A = ±0.05%
3A 1/4W 0.25W (1206) B = ±0.1%; 0.2dB
5A 1/2W 0.5W (1210) C = ±0.25%; 0.3dB
7A 1/20W 0.05W (0201) D = ±0.5%; 0.5dB
8A 1/32W 0.03125W (RN31) F = ±1%; 1dB
12 3/4W 0.75W (2010) G = ±2%; 2dB
1W 1W 1W (1218/2512) J = ±5%
2W 2W 2W N=0/-20%
R=0/-30%
Resistance value (code 9-12)
0R00 = Jumper
R0XX<0.1Ω
RXXX=0.1Ω-0.976Ω
XRXX=1Ω-9.76Ω
XXRX=10Ω-97.6Ω
XXX0=100Ω-976Ω
XXX1 = 1K - 9.76K
XXX2 = 10K - 97.6K
XXX3 = 100K - 9.78K
XXX4 = 1M - 9.76M
XXX5 = 10M - 97.6M
XXX6=100M+
XXDB = 1 - 20DB
Right values apply to
trimmable resistors
dB values apply to
attenuators
Chip Resistors General Information
Ordering information - North America
16
Standardofvaluesinadecadeaccordingto“IECpublication63”
E24 series 10 11 12 13 15 16 18 20 22 24 27 30
33 36 39 43 47 51 56 62 68 75 82 91
E96 series
100 102 105 107 110 113 115 118 121 124 127 130
133 137 140 143 147 150 154 158 162 165 169 174
178 182 187 191 196 200 205 210 215 221 226 232
237 243 249 255 261 267 274 280 287 294 301 309
316 324 332 340 348 357 365 374 383 392 402 412
422 432 442 453 464 475 487 499 511 523 536 549
562 576 590 604 619 634 649 665 681 698 715 732
750 768 787 806 825 845 866 887 909 931 953 976
Packing quantities
Size code Tape width 178mm/Ø7”reel 254mm/Ø10"reel 330mm/Ø13"reel Weight Volume
Paper Embossed Paper Paper Embossed g/100pcs mm3
0100 8mm 20 000 --- --- --- --- 0.007 0.0104
0201 8mm 10000/20000 --- --- 50 000 --- 0.016 0.041
0402 8mm 10000/20000 --- 20 000 50 000 --- 0.058 0.175
0603 8mm 5 000 --- 10 000 20 000 --- 0.192 0.576
0612 8mm --- 5 000 --- --- --- 0.862 2.728
0805 8mm 4000/5000 --- 10 000 20 000 --- 0.450 1.250
0815 8mm --- 4 000 --- --- --- 1.71 4.44
0830 12mm --- 4 000 --- --- --- 4.594 5.55
1206 8mm 4000/5000 4 000 10 000 20 000 --- 0.862 2.728
1210 8mm 5 000 --- 10 000 20 000 --- 1.471 4.030
1218 12mm --- 4 000 --- --- --- 2.703 7.590
2010 12mm --- 4000/2000 --- --- 16 000 2.273 6.875
2512 12mm --- 4 000 --- --- --- 3.704 10.827
4527 24mm --- 1 000 --- --- --- 16.225 48.3
YC102 8mm 10 000 --- --- --- --- 0.052 ---
YC104 8mm 10 000 --- --- --- --- 0.099 ---
AF/YC122 8mm 10 000 --- --- 50 000 --- 0.100 ---
TC122 8mm 10 000 --- --- 50 000 --- 0.112 ---
ATV321 8mm 10 000 -- --- --- --- 0.100 ---
AF/YC124 8mm 10 000 --- 20 000 40 000 --- 0.281 ---
TC124 8mm 10 000 --- 20 000 40 000 --- 0.311 ---
YC162 8mm 5 000 --- -- --- --- 0.376 ---
YC164 8mm 5 000 --- 10 000 20 000 --- 0.833 ---
TC164 8mm 5 000 --- 10 000 20 000 --- 1.030 ---
YC158 8mm 5 000 --- --- 20 000 --- 0.855 ---
YC248 12mm 5 000 4 000 --- --- --- 0.885 ---
YC324 12mm --- 4 000 --- --- --- 2.703 ---
YC358 12mm --- 4 000 --- --- --- 3.333 ---
12NC Ordering information
Thefirst8or9digitsofthe12digitcataloguenumberaregivenundersection
“Phycompworldwide-Traditionaltype”onfollowingpages.
The remaining 4 or 3 digits represent the resistance value with the last digit
indicating the multiplier as shown in table on the right.
Last digit of 12NC
Resistance Last digit
0.001to0.0976Ω 0
0.1to0.976Ω 7
Example:
0.001Ω = 0010or010
0.02Ω = 0200or200
0.3Ω = 3007or307
1Ω = 1008or108
33kΩ = 3303or333
10MΩ = 1006or106
1to9.76Ω 8
10to97.6Ω 9
100to976Ω 1
1to9.76kΩ 2
10to97.6kΩ 3
100to976kΩ 4
1to9.76MΩ 5
10to97.6MΩ 6
Chip Resistors General Information
IEC publication 63, SPQ, last digit of 12NC
17
Features
• Extremely thin and light
• Highly reliable multilayer electrode construction
• Compatible with all soldering processes
• Highly stable in auto-placement surface mounting applications
• Barrier layer end termination
• Jumper is available
• Available in 8mm tape & reel per IEC 60286-3 (EIA -RS 481)
Derating curve Construction
Maximum dissipation (P) in percentage of
rated power as a function of the operating
ambient temperature (Tamb).
100
80
60
40
20
-55-40 -200 20 40 60 80
70
100120 140 160
Ambient Temperature (
C)
Rated Power (%)
155
RC0402-
RC2512
125
RC0100-
RC0201
overcoat
protective glass
resistive layer
inner electrode
termination (Ni / matte tin)
ceramic substrate
inner electrode
marking layer
Dimensions
W
unit: m
m
I
2
I
2
I
1
I
1
L
H
Type L W H I1I2
RC01005 0.40 ±0.02 0.20 ±0.02 0.13 ±0.02 0.10 ±0.03 0.10 ±0.03
RC0201 0.60 ±0.03 0.30 ±0.03 0.23 ±0.03 0.10 ±0.05 0.15 ±0.05
RC0402 1.00 ±0.05 0.50 ±0.05 0.35 ±0.05 0.20 ±0.10 0.25 ±0.10
RC0603 1.60 ±0.10 0.80 ±0.10 0.45 ±0.10 0.25 ±0.15 0.25 ±0.15
RC0805 2.00 ±0.10 1.25 ±0.10 0.50 ±0.10 0.35 ±0.20 0.35 ±0.20
RC1206 3.10 ±0.10 1.60 ±0.10 0.55 ±0.10 0.45 ±0.20 0.40 ±0.20
RC1210 3.10 ±0.10 2.60 ±0.15 0.50 ±0.10 0.45 ±0.15 0.50 ±0.20
RC1218 3.10 ±0.10 4.60 ±0.10 0.55 ±0.10 0.45 ±0.20 0.40 ±0.20
RC2010 5.00 ±0.10 2.50 ±0.15 0.55 ±0.10 0.45 ±0.15 0.50 ±0.20
RC2512 (1W) 6.35 ±0.10 3.10 ±0.15 0.55 ±0.10 0.60 ±0.20 0.50 ±0.20
RC2512 (2W) 6.35 ±0.10 3.10 ±0.15 0.55 ±0.10 0.60 ±0.20 1.15 ±0.20
Chip Resistors Selection Charts
RC - Thick film general purpose chip resistors, 01005 to 2512
18
Chip Resistors Selection Charts
RC - Thick film general purpose chip resistors, 01005 to 2512
Electrical characteristics
Type Power
P70 Operating Temp.
range MWV RCOV DWV Resistance range & tolerance T. C. R.
(ppm/°C)
Jumper criteria
(unit: A)
RC01005 1/32W -55°Cto+125°C 15V 30V 30V E24 ±1%, 5%
Jumper 1Ω≤R≤1MΩ
<50mΩ
1Ω≤R≤10Ω
10Ω≤R≤1MΩ
-200~600
±250 Rated current
Max. current 0.5
1.0
RC0201 1/20W -55°Cto+125°C 25V 50V 50V
E24 ±5%
E24/E96±1%
E24/E96
±0.1%,±0.5%
Jumper
1Ω≤R≤10MΩ
1Ω≤R≤10MΩ
10Ω≤R≤1MΩ
<50mΩ
10Ω<R≤10MΩ
1Ω≤R≤10Ω
±200
-100/+350
Rated current
Max. current 0.5
1.0
RC0402 1/16W -55°Cto+125°C 50V 100V 100V
E24 ±5%
E24/E96±1%
E24/E96
±0.1%,±0.5%
Jumper
1Ω≤R≤22MΩ
1Ω≤R≤10MΩ
10Ω≤R≤1MΩ
<50mΩ
1Ω≤R≤10Ω
10Ω<R≤10MΩ
10MΩ<R≤22MΩ
±200
±100
±200
Rated current
Max. current 1.0
2.0
RC0603
1/10W -55°Cto+125°C 50V 100V 100V
E24 ±5%
E24/E96±1%
E24/E96
±0.1%,±0.5%
Jumper
1Ω≤R≤22MΩ
1Ω≤R≤10MΩ
10Ω≤R≤1MΩ
<50mΩ
1Ω≤R≤10Ω
10Ω<R≤10MΩ
10MΩ<R≤22MΩ
±200
±100
±200
Rated current
Max. current 1.0
2.0
1/5W -55°Cto+125°C 50V 100V 100V E24 ±5%
E24/E96±1%
1Ω≤R≤1MΩ
1Ω≤R≤1MΩ1Ω≤R≤1MΩ±200 -- --
RC0805
1/8W -55°Cto+155°C 150V 300V 300V
E24 ±5%
E24/E96±1%
E24/E96
±0.1%,±0.5%
Jumper
1Ω≤R≤22MΩ
1Ω≤R≤10MΩ
10Ω≤R≤1MΩ
<50mΩ
1Ω≤R≤10Ω
10Ω<R≤10MΩ
10MΩ<R≤22MΩ
±200
±100
±200
Rated current
Max. current 2.0
5.0
1/4W -55°Cto+155°C 150V 300V 300V E24 ±5%
E24/E96±1%
1Ω≤R≤1MΩ
1Ω≤R≤1MΩ 1Ω≤R≤1MΩ ±200 -- --
RC1206
1/4W -55°Cto+155°C 200V 400V 500V
E24 ±5%
E24/E96±1%
E24/E96
±0.1%,±0.5%
Jumper
10Ω≤R≤22MΩ
1Ω≤R≤10MΩ
10Ω≤R≤1MΩ
<50mΩ
1Ω≤R≤10Ω
10Ω<R≤10MΩ
10MΩ<R≤22MΩ
±200
±100
±200
Rated current
Max. current 2.0
10.0
1/2W -55°Cto+155°C 200V 400V 500V E24 ±5%
E24/E96±1%
1Ω≤R≤1MΩ
1Ω≤R≤1MΩ 1Ω≤R≤1MΩ ±200 -- --
RC1210 1/2W -55°Cto+155°C 200V 500V 500V
E24 ±5%
E24/E96±1%
E24/E96±0.5%
Jumper
1Ω≤R≤22MΩ
1Ω≤R≤10MΩ
10Ω≤R≤1MΩ
<50mΩ
1Ω≤R≤10Ω
10Ω<R≤10MΩ
10MΩ<R≤22MΩ
±200
±100
±200
Rated current
Max. current 2.0
10.0
RC1218 1W -55°Cto+155°C 200V 500V 500V
E24 ±5%
E24/E96±1%
E24/E96
±0.1%,±0.5%
Jumper
1Ω≤R≤1MΩ
1Ω≤R≤1MΩ
10Ω≤R≤1MΩ
<20mΩ
Rated current
Max. current 6.0
10.0
RC2010 3/4W -55°Cto+155°C 200V 500V 500V E24 ±5%
E24/E96±1%
E24/E96
±0.1%,±0.5%
Jumper
1Ω≤R≤22MΩ
1Ω≤R≤10MΩ
10Ω≤R≤1MΩ
<50mΩ
Rated current
Max. current 2.0
10.0
RC2512
1W -55°Cto+155°C 200V 500V 500V Rated current
Max. current 2.0
10.0
2W -55°Cto+155°C 200V 400V 500V E24 ±5%
E24/E96±1%
1Ω≤R≤150Ω
1Ω≤R≤150Ω 1Ω≤R≤150Ω ±200 -- --
19
Chip Resistors Selection Charts
RC - Thick film general purpose chip resistors, 01005 to 2512
Environmental characteristics
Performance test Test method Procedure Requirements
Life MIL-STD-202G-
method 108A 1 000 hours at 70 ±5°C applied RCWV
1.5 hours on, 0.5 hours off, still air required
01005:±(3%+0.05Ω)
 <100mΩforjumper
Others: ±(1%+0.05Ω)for1%tol.
 ±(3%+0.05Ω)for5%tol.
 <100mΩforjumper
High temperature exposure MIL-STD-202G-
method 108A 1 000 hours at maximum operating temperature
dependingonspecification,unpowered
01005: ±(1%+0.05Ω)
 <50mΩforjumper
Others: ±(1%+0.05Ω)for1%tol.
 ±(2%+0.05Ω)for5%tol.
 <50mΩforjumper
Moisture resistance MIL-STD-202G-
method 106F
Eachtemperature/humiditycycleisdefinedas
8hours(method106F),3cycles/24hours
for10dwith25°C/65°C95%R.H
01005: ±(2.0%+0.05Ω)
 <100mΩforjumper
Others: ±(0.5%+0.05Ω)for1%tol.
 ±(2%+0.05Ω)for5%tol.
 <100mΩforjumper
Thermal shock MIL-STD-202G-
method 107G LCT/UCT,numberofcyclesrequiredis300
Maximum transfer time is 20 seconds
01005: ±(1%+0.05Ω)
 <50mΩforjumper
Others: ±(0.5%+0.05Ω)for1%tol.
 ±(1%+0.05Ω)for5%tol.
 <50mΩforjumper
Solderability
Wetting J-STD-002B
testB
Electricaltestnotrequired.Magnification50X
Lead-free solder bath at 245 ±3°C
Dipping time: 3 ±0.5 seconds
Welltinned(≥95%covered)
No visible damage
Resistance to
soldering heat MIL-STD-202G-
method 210F Lead-free solder, 260°C, 10 seconds
immersion time
01005: ±(1%+0.05Ω)
 <50mΩforjumper
Others: ±(0.5%+0.05Ω)for1%tol.
 ±(1%+0.05Ω)for5%tol.
 <50mΩforjumper
No visible damage
Short time overload MIL-R-55342D-
para 4.7.5
2.5 times RCWV or maximum overload voltage
whichever is less for 5 seconds at room
temperature
01005: ±(2%+0.05Ω)
 <50mΩforjumper
Others: ±(1%+0.05Ω)for1%tol.
 ±(2%+0.05Ω)for5%tol.
 <50mΩforjumper
No visible damage
20
Chip Resistors Selection Charts
RC - Thick film general purpose chip resistors, 01005 to 2512
Globalpartnumber-PreferredtypefororderingYageo/Phycompbrandedproducts
Ordering example: RC0402JR-07100KL
R C 0 4 0 2 J R 0 7 1 0 0 K L
Series name (code 1-2) Default code(1/2) (code 17)
RC=Generalpurposethickfilm
Resistance (code 12-16)
Size code (code 3-6) 0R = Jumper
(inch/metric) 10R =10Ω
0100 = 0.4 x 0.2 100R=100Ω
0201 = 0.6 x 0.3 100K=100KΩ
0402 = 1.0 x 0.5
0603 = 1.6 x 0.8 Taping reel (code 10-11)
0805 = 2.0 x 1.25 07 = 7 inch Dia. reel
1206 = 3.2 x 1.6 10 = 10 inch Dia. reel
1210 = 3.2 x 2.6 13 = 13 inch Dia. reel
1218 = 3.2 x 4.5 7D = 7 inch Dia. reel,
2 x standard quantity
2010 = 5.0 x 2.5
2512 = 6.35 x 3.2 7W = 7 inch Dia. reel,
2 x standard power
Tolerance (code 7)
B = ±0.1% T. C. R. (code 9)
D = ±0.5% “―”=Basedonspec.
F = ±1% (―forthickfilmonly)
J = ±5% (for Jumper ordering)
Packing style (code 8 )
R = Paper tape reel
K = Embossed plastic tape reel
C = Bulk cassette
S = ESD safe reel
Note:1.AllofourRSMDproductsareRoHScompliant."LFP"oftheinternal2Dreellabelmentions"LeadFreeProcess"
2. Letter L is system default code for ordering only
21
Chip Resistors Selection Charts
RC - Thick film general purpose chip resistors, 01005 to 2512
Phycomp worldwide - Traditional type
Generalpurposethickfilm/RCseries
Size: inch (mm) 0201 (0603) 0402 (1005) 0603 (1608) 0805 (2012)
Power 1/20W 1/16W 1/10W 1/8W
Tolerance +5% +1% +5% +1% +5% +1% +5% +1%
Resistance E24 E24/E96 E24 E24/E96 E24 E24/E96 E24 E24/E96
Packing paper tape paper tape paper tape paper tape
Quantity 5 000 --- --- --- --- 2322 702 60...L 2322 704 6.…L 2322 730 61...L 2322 734 6.…L
10 000 2322 803 70...L 2322 806 7.…L 2322 705 70...L 2322 706 7.…L 2322 702 70...L 2322 704 7.…L 2322 730 71...L 2322 734 7.…L
20 000 2322 806 80...L 2322 806 8.…L --- --- 2322 702 81...L 2322 704 8.…L 2322 730 81...L 2322 734 8.…L
50 000 2322 803 60...L 2322 806 6.…L 2322 705 87...L 2322 706 8.…L --- --- --- ---
Jumper 5 000 --- --- --- --- 2322 702 96001L --- 2322 730 91002L ---
10 000 2322 803 91001L --- 2322 705 91001L --- 2322 702 97001L --- 2322 730 91003L ---
20 000 --- --- --- --- 2322 702 92002L --- 2322 730 92002L ---
50 000 --- --- 2322 705 91007L --- --- --- --- ---
For ordering rules: Seepage14forE24/E96valuesandthelast4or3digitsofthe12NCcataloguenumber
Phycomp worldwide - Traditional type
Generalpurposethickfilm/RCseries
Size: inch (mm) 1206 (3216) 1210 (3225) 1218 (3248) 2010 (5025) 2512 (6432)
Power 1/4W 1/2W 1 W 3/4W 1 W
Tolerance +5% +1% +5% +1% +5% +1% +5% +1% +5% +1%
Resistance E24 E24/E96 E24 E24/E96 E24 E24/E96 E24 E24/E96 E24 E24/E96
Packing paper tape paper tape blister tape blister tape blister tape
Quantity 4 000
--- --- --- --- 2322 735 64...L 2322 735 7.…L 2322 760 60...L 2322 761 6.…L 2322 762 60...L 2322 763 6.…L
5 000
2322 711 61...L 2322 724 6.…L 2390 735 70...L 2390 735 3.…L --- --- --- --- --- ---
10 000
2322 711 51...L 2322 724 7.…L --- --- --- --- --- --- --- ---
20 000
2322 711 81...L 2322 724 8.…L 2390 735 71...L 2390 735 5.…L --- --- --- --- --- ---
Jumper 4 000
--- --- --- --- 2322 735 90007L --- 2322 760 90003L --- 2322 762 90000L ---
5 000
2322 711 91032L --- 2390 735 90001L --- --- --- --- --- --- ---
10 000
2322 711 91005L --- --- --- --- --- --- --- --- ---
20 000
2322 711 92004L --- --- --- --- --- --- --- --- ---
For ordering rules: Seepage14forE24/E96valuesandthelast4or3digitsofthe12NCcataloguenumber
Phycomp CTC ordering code - Traditional type - North America
Regional code for ordering Phycomp branded products. Please see page 15 for details.
22
Derating curve Construction
Maximum dissipation (P) in percentage of
rated power as a function of the operating
ambient temperature (Tamb).
100
80
60
40
20
-55-40 -20020 40 60 80
70
100120 140 160
Ambient Temperature (
C)
Rated Power (%)
155
overcoat
protective glass
resistive layer
inner electrode
termination (Ni / matte tin)
ceramic substrate
inner electrode
marking layer
Dimensions
W
unit: m
m
I
2
I
2
I
1
I
1
L
H
Type L W H I1I2
RC0805 2.00 ±0.10 1.25 ±0.10 0.50 ±0.10 0.35 ±0.20 0.35 ±0.20
RC1206 3.10 ±0.10 1.60 ±0.10 0.55 ±0.10 0.45 ±0.20 0.40 ±0.20
Features
• Reducedsizeoffinalequipment
• Low assembly costs
• Higher component and equipment reliability
• Highohmicvaluesupto100MΩ
• Suitable for power supplies in small equipment
Chip Resistors Selection Charts
RC - Thick film high ohmic chip resistors, 0805 / 1206
23
Chip Resistors Selection Charts
RC - Thick film high ohmic chip resistors, 0805 / 1206
Electrical characteristics
Type Power
P70
Operating Temp.
range MWV RCOV DWV Resistance range & tolerance T. C. R.
RC0805 1/8W -55°Cto+155°C 150V 300V 300V E24 ±5%, ±10%, ±20% 24MΩ≤R≤100MΩ ±300ppm/°C
RC1206 1/4W -55°Cto+155°C 200V 400V 500V
Note: Seepage11fororderingcode.Formoredetailed,pleasecontactoursalesoffices,distributorsandrepresentativesinyourregion.
Environmental characteristics
Performance test Test method Procedure Requirements
Life MIL-STD-202G-
method 108A 1 000 hours at 70 ±5°C applied RCWV
1.5 hours on, 0.5 hours off, still air required ±(2%+0.05Ω)
High temperature exposure MIL-STD-202G-
method 108A 1 000 hours at maximum operating temperature
dependingonspecification,unpowered ±(1%+0.05Ω)
Moisture resistance MIL-STD-202G-
method 106F Eachtemperature/humiditycycleisdefinedas8hours(method
106F),3cycles/24hoursfor10dwith25°C/65°C95%R.H ±(2%+0.05Ω)
Thermal shock MIL-STD-202G-
method 107G LCT/UCT,numberofcyclesrequiredis300
Maximum transfer time is 20 seconds ±(1%+0.05Ω)
Solderability
Wetting J-STD-002B
testB
Electricaltestnotrequired.Magnification50X
Lead-free solder bath at 245 ±3°C
Dipping time: 3 ±0.5 seconds
Well tinned
(≥95%covered)
No visible damage
Resistance to
soldering heat MIL-STD-202G-
method 210F Lead-free solder, 260°C, 10 seconds immersion time ±(1%+0.05Ω)
No visible damage
Short time overload MIL-R-55342D-
para 4.7.5 2.5 times RCWV or maximum overload voltage whichever is
less for 5 seconds at room temperature ±(2%+0.05Ω)
No visible damage
24
Features
• Narrow tolerance
• Low T. C. R.
• Highly reliable multilayer electrode construction
• Compatible with all soldering processes
• Suitable for auto-placement surface mounting applications
• Available in 8mm tape & reel per EIA RS481
Derating curve Construction
Maximum dissipation (P) in percentage of
rated power as a function of the operating
ambient temperature (Tamb).
overcoat
protective glass
resistive layer
inner electrode
termination (Ni / matte tin)
ceramic substrate
inner electrode
marking layer
Dimensions
W
unit: m
m
I
2
I
2
I
1
I
1
L
H
Type L W H I1I2
RE0402 1.00 ±0.05 0.50 ±0.05 0.32 ±0.05 0.20 ±0.10 0.25 ±0.10
RE0603 1.60 ±0.10 0.80 ±0.10 0.45 ±0.10 0.25 ±0.15 0.25 ±0.15
RE0805 2.00 ±0.10 1.25 ±0.10 0.50 ±0.10 0.35 ±0.20 0.35 ±0.20
RE1206 3.10 ±0.10 1.60 ±0.10 0.55 ±0.10 0.45 ±0.20 0.40 ±0.20
Chip Resistors Selection Charts
RE - Thick film precision grade chip resistors, 0402 to 1206
100
80
60
40
20
-55-40 -20020 40 60 80
70
100120 140 160
Ambient Temperature (
C)
Rated Power (%)
155
25
Chip Resistors Selection Charts
RE - Thick film precision grade chip resistors, 0402 to 1206
Electrical characteristics
Type Power
P70 Operating Temp. range MWV RCOV DWV Resistance range & tolerance T. C. R.
RE0402 1/16W -55°Cto+155°C 50V 100V 100V
E24/E96±0.1%,±0.5%,±1% 10Ω≤R≤1MΩ ±50ppm/°C
RE0603 1/10W -55°Cto+155°C 50V 100V 100V
RE0805 1/8W -55°Cto+155°C 150V 300V 300V
RE1206 1/4W -55°Cto+155°C 200V 400V 500V
Environmental characteristics
Performance test Test method Procedure Requirements
Life MIL-STD-202G-
method 108A 1 000 hours at 70 ±5°C applied RCWV
1.5 hours on, 0.5 hours off, still air required ±(3%+0.05Ω)
High temperature exposure MIL-STD-202G-
method 108A 1 000 hours at maximum operating temperature
dependingonspecification,unpowered ±(3%+0.05Ω)
Moisture resistance MIL-STD-202G-
method 106F
Eachtemperature/humiditycycleisdefinedas
8hours(method106F),3cycles/24hours
for10dwith25°C/65°C95%R.H
±(3%+0.05Ω)
Thermal shock MIL-STD-202G-
method 107G LCT/UCT,numberofcyclesrequiredis300
Maximum transfer time is 20 seconds ±(1%+0.05Ω)
Solderability
Wetting IPC/JEDECJ-
STD-002B
testB
Electricaltestnotrequired.Magnification50X
Lead-free solder bath at 245 ±3°C
Dipping time: 3 ±0.5 seconds
Welltinned(≥95%covered)
No visible damage
Resistance to
soldering heat MIL-STD-202G-
method 210F Lead-free solder, 260°C, 10 seconds immersion time ±(0.5%+0.05Ω)
No visible damage
Short time overload MIL-R-55342D-
para 4.7.5 2.5 times RCWV or maximum overload voltage which-
ever is less for 5 seconds at room temperature ±(1%+0.05Ω)
No visible damage
26
Chip Resistors Selection Charts
RE - Thick film precision grade chip resistors, 0402 to 1206
Globalpartnumber-PreferredtypefororderingYageo/Phycompbrandedproducts
Ordering example: RE0603DRE07100KL
R E 0 6 0 3 D R E 0 7 1 0 0 K L
Series name (code 1-2) Default code(1/2) (code 17)
RE=Thickfilmprecisiongrade
Resistance (code 12-16)
Size code (code 3-6) 10R =10Ω
(inch/metric) 100R=100Ω
0402 = 1.0 x 0.5 100K=100KΩ
0603 = 1.6 x 0.8
0805 = 2.0 x 1.25 Taping reel (code 10-11)
1206 = 3.2 x 1.6 07 = 7 inch Dia. reel
10 = 10 inch Dia. reel
Tolerance (code 7) 13 = 13 inch Dia. reel
B = ±0.1%
D = ±0.5% T. C. R. (code 9)
F = ±1% E=±50ppm/°C
Packing style (code 8 )
R = Paper tape reel
Note:1.AllofourRSMDproductsareRoHScompliant."LFP"oftheinternal2Dreellabelmentions"LeadFreeProcess"
2. Letter L is system default code for ordering only
 3.REseriesproductsareavailableby"Globalpartnumber"only
Phycomp CTC ordering code - Traditional type - North America
Regional code for ordering Phycomp branded products. Please see page 15 for details.
27
Derating curve Construction
Maximum dissipation (P) in percentage of
rated power as a function of the operating
ambient temperature (Tamb).
100
80
60
40
20
-55 -40 -20 0 20 40 60 80
70
100 120 140 160
Ambient Temperature (°C)
Rated Power (%)
155
RT0402-
RT1206
125
RT1210-RT2512
protective glass
marking layer
resistive layer
inner electrode
ceramic substrate
inner electrode
Dimensions
W
unit: m
m
I
2
I
2
I
1
I
1
L
H
Type L W H I1I2
RT0402 1.00 ±0.10 0.50 ±0.05 0.30 ±0.05 0.20 ±0.10 0.25 ±0.10
RT0603 1.60 ±0.10 0.80 ±0.10 0.45 ±0.10 0.25 ±0.15 0.25 ±0.15
RT0805 2.00 ±0.10 1.25 ±0.10 0.50 ±0.10 0.35 ±0.20 0.35 ±0.20
RT1206 3.10 ±0.10 1.60 ±0.10 0.55 ±0.10 0.45 ±0.20 0.40 ±0.20
RT1210 3.10 ±0.10 2.60 ±0.15 0.55 ±0.10 0.50 ±0.20 0.50 ±0.20
RT2010 5.00 ±0.10 2.50 ±0.15 0.55 ±0.10 0.60 ±0.20 0.50 ±0.20
RT2512 6.35 ±0.10 3.20 ±0.15 0.55 ±0.10 0.60 ±0.20 0.50 ±0.20
Features
• High precision - High stability
• LowT.C.R./lownoise
• High accuracy (±0.05%, ±0.1%, ±0.25%, ±0.5%, ±1%)
Chip Resistors Selection Charts
RT - Thin film high precision high stability chip resistors, 0402 to 2512
28
Electrical characteristics
Type Power
P70
Operating Temp.
range MWV RCOV DWV Resistance range & tolerance T. C. R.
RT0402 1/16W
-55°Cto+155°C
50V 100V 75V
E24/E96
±0.05%, ±0.1%,
±0.25%, ±0.5%, ±1%
10Ω≤R≤121KΩ
±50ppm/°C
±25ppm/°C
±15ppm/°C
±10ppm/°C
RT0603 1/10W 75V 150V 100V 5.1Ω≤R≤681KΩ
RT0805 1/8W 150V 300V 200V 5.1Ω≤R≤1.5MΩ
RT1206 1/4W 200V 400V 300V
RT1210 1/4W
-55°Cto+125°C
200V 400V 400V 5.1Ω≤R≤1MΩ
RT2010 1/2W 200V 400V 400V 10Ω≤R≤1MΩ
RT2512 3/4W 200V 400V 400V
Environmental characteristics
Performance test Test method Procedure Requirements
Life MIL-STD-202G-
method 108A 1 000 hours at 70 ±5°C applied RCWV
1.5 hours on, 0.5 hours off, still air required ±(0.5%+0.05Ω)forRT
High temperature exposure MIL-STD-202G-
method 108A 1 000 hours at maximum operating temperature
dependingonspecification,unpowered ±(0.5%+0.05Ω)
Moisture resistance MIL-STD-202G-
method 106F
Eachtemperature/humiditycycleisdefinedas8hours
(method106F),3cycles/24hoursfor10dwith
25°C/65°C95%R.H
±(0.5%+0.05Ω)
Thermal shock MIL-STD-202G-
method 107G LCT/UCT,numberofcyclesrequiredis300
Maximum transfer time is 20 seconds ±(0.5%+0.05Ω)
Short time overload MIL-R-55342D-
para 4.7.5 2.5 times RCWV or maximum overload voltage which-
ever is less for 5 seconds at room temperature ±(0.5%+0.05Ω)forRT
No visible damage
Solderability
Resistance to
soldering heat MIL-STD-202G-
method 210F Lead-free solder, 260°C, 10 seconds immersion time ±(0.5%+0.05Ω)
No visible damage
Wetting J-STD-002B
testB
Electricaltestnotrequired.Magnification50X
Lead-free solder bath at 245 ±3°C
Dipping time: 3 ±0.5 seconds
Welltinned(≥95%
covered)
No visible damage
Chip Resistors Selection Charts
RT - Thin film high precision high stability chip resistors, 0402 to 2512
29
Globalpartnumber-PreferredtypefororderingYageo/Phycompbrandedproducts
Ordering example: RT0603DRE07100KL
R T 0 6 0 3 D R E 0 7 1 0 0 K L
Series name (code 1-2) Default code(1/2) (code 17)
RT=Highprecision-Highstabilitythinfilm
Resistance (code 12-16)
Size code (code 3-6) 10R =10Ω
(inch/metric) 100R=100Ω
0402 = 1.0 x 0.5 10K =10KΩ
0603 = 1.6 x 0.8 100K=100KΩ
0805 = 2.0 x 1.25
1206 = 3.2 x 1.6 Taping reel (code 10-11)
1210 = 3.2 x 2.6 07 = 7 inch Dia. reel
2010 = 5.0 x 2.5 10 = 10 inch Dia. reel
2512 = 6.35 x 3.2 13 = 13 inch Dia. reel
Tolerance (code 7) T. C. R. (code 9)
W = ±0.05% B=±10ppm/°C(onrequest)
B = ±0.1% C=±15ppm/°C(onrequest)
C = ±0.25% D=±25ppm/°C
D = ±0.5% E=±50ppm/°C
F = ±1%
Packing style (code 8 )
R = Paper tape reel
K = Embossed plastic tape reel
Note:1.AllofourRSMDproductsareRoHScompliant."LFP"oftheinternal2Dreellabelmentions"LeadFreeProcess"
2. Letter L is system default code for ordering only
Chip Resistors Selection Charts
RT - Thin film high precision high stability chip resistors, 0402 to 2512
30
Phycomp worldwide - Traditional type
High precision - High stability
Size: inch (mm) 0402 (1005) 0603 (1608)
Power 1/16W 1/10W
Tolerance ±1% ±0.5% ±0.25% ±0.1% ±1% ±0.5% ±0.25% ±0.1%
Resistance E24/E96 E24/E96
Packing paper tape paper tape
Quantity TC25 5 000
--- --- --- --- 2390 604 7.…L 2390 604 6.…L 2390 604 5.…L 2390 604 4.…L
TC50 5 000
--- --- --- --- 2390 404 7.…L 2390 404 6.…L 2390 404 5.…L 2390 404 4.…L
TC25 10 000
2390 607 7.…L 2390 607 6.…L 2390 607 5.…L 2390 607 4.…L --- --- --- ---
TC50 10 000
2390 407 7.…L 2390 407 6.…L 2390 407 5.…L 2390 407 4.…L --- --- --- ---
For ordering rules: Seepage14forE24/E96valuesandthelast4or3digitsofthe12NCcataloguenumber
Phycomp worldwide - Traditional type
High precision - High stability
Size: inch (mm) 0805 (2012) 1206 (3216) 1210 (3225)
Power 1/8W 1/4W 1/2W
Tolerance ±1% ±0.5% ±0.25% ±0.1% ±1% ±0.5% ±0.25% ±0.1% ±1% ±0.5% ±0.25% ±0.1%
Resistance E24/E96 E24/E96 E24/E96
Packing paper tape paper tape paper tape
Quantity TC10 5 000
2390 801 7.…L 2390 801 6.…L 2390 801 5....L 2390 801 4....L 2390 811 7....L 2390 811 6....L 2390 811 5....L 2390 811 4....L 2390 812 7....L 2390 812 6....L 2390 812 5....L 2390 812 4....L
TC15 5 000
2390 701 7.…L 2390 701 6.…L 2390 701 5....L 2390 701 4....L 2390 711 7....L 2390 711 6....L 2390 711 5....L 2390 711 4....L 2390 712 7....L 2390 712 6....L 2390 712 5....L 2390 712 4....L
TC25 5 000
2390 601 7.…L 2390 601 6....L 2390 601 5....L 2390 601 4....L 2390 611 7....L 2390 611 6....L 2390 611 5....L 2390 611 4....L 2390 612 7....L 2390 612 6....L 2390 612 5....L 2390 612 4....L
TC50 5 000
2390 401 7.…L 2390 401 6....L 2390 401 5....L 2390 401 4....L 2390 411 7....L 2390 411 6....L 2390 411 5....L 2390 411 4....L 2390 412 7....L 2390 412 6....L 2390 412 5....L 2390 412 4....L
For ordering rules: Seepage14forE24/E96valuesandthelast4or3digitsofthe12NCcataloguenumber
Phycomp worldwide - Traditional type
High precision - High stability
Size: inch (mm) 2010 (5025) 2512 (6432)
Power 1/2W 3/4W
Tolerance ±1% ±0.5% ±0.25% ±0.1% ±1% ±0.5% ±0.25% ±0.1%
Resistance E24/E96 E24/E96
Packing blister tape blister tape
Quantity TC10 4 000
2390 815 7....L 2390 815 6....L 2390 815 5....L 2390 815 4....L 2390 818 7....L 2390 818 6....L 2390 818 5....L 2390 818 4....L
TC15 4 000
2390 731 7....L 2390 731 6....L 2390 731 5....L 2390 731 4....L 2390 735 7....L 2390 735 6....L 2390 735 5....L 2390 735 4....L
TC25 4 000
2390 615 7....L 2390 615 6....L 2390 615 5....L 2390 615 4....L 2390 618 7....L 2390 618 6....L 2390 618 5....L 2390 618 4....L
TC50 4 000
2390 415 7....L 2390 415 6....L 2390 415 5....L 2390 415 4....L 2390 418 7....L 2390 418 6....L 2390 418 5....L 2390 418 4....L
For ordering rules: Seepage14forE24/E96valuesandthelast4or3digitsofthe12NCcataloguenumber
Phycomp CTC ordering code - Traditional type - North America
Regional code for ordering Phycomp branded products. Please see page 13 for details.
Thinfilmproductrangeagainsttolerance/T.C.R.(orderingcode)
Tolerance ±0.05% (W) ±0.1% (B) ±0.25% (C) ±0.5% (D) ±1% (F)
T.C.R.(ppm/°C) ±10 (B) ±15 (C) ±25 (D) ±10 (B) ±15 (C) ±25 (D) ±50 (E) ±10 (B) ±15 (C) ±25 (D) ±50 (E) ±25 (D) ±50 (E) ±50 (E)
RT0402
-- -- -- 10R - 100K 10R - 100K 10R - 121K 10R - 121K 10R - 100K 10R - 100K 10R - 121K 10R - 121K 10R - 121K 10R - 121K 10R - 121K
RT0603
1K - 47K 1K - 47K 1K - 47K 10R - 100K 10R - 100K 10R - 681K 10R - 681K 10R - 100K 10R - 100K 10R - 681K 5R1 - 681K 10R - 681K 5R1 - 681K 5R1 - 681K
RT0805
100R - 100K 100R - 100K 100R - 100K 10R - 100K 10R - 100K 10R - 1.5M 10R - 1.5M 10R - 100K 10R - 100K 10R - 1.5M 5R1 - 1.5M 10R - 1.5M 5R1 - 1.5M 5R1 - 1.5M
RT1206
100R - 100K 100R - 100K 100R - 100K 10R - 100K 10R - 100K 10R - 1.5M 10R - 1.5M 10R - 100K 10R - 100K 10R - 1.5M 5R1 - 1.5M 10R - 1.5M 5R1 - 1.5M 5R1 - 1.5M
RT1210
100R - 100K 100R - 100K 100R - 100K 10R - 100K 10R - 100K 10R - 1M 10R - 1M 10R - 100K 10R - 100K 10R - 1M 5R1 - 1M 10R - 1M 5R1 - 1M 5R1 - 1M
RT2010
100R - 100K 100R - 100K 100R - 100K 10R - 100K 10R - 100K 10R - 1M 10R - 1M 10R - 100K 10R - 100K 10R - 1M 10R - 1M 10R - 1M 10R - 1M 10R - 1M
RT2512
100R - 100K 100R - 100K 100R - 100K 10R - 100K 10R - 100K 10R - 1M 10R - 1M 10R - 100K 10R - 100K 10R - 1M 10R - 1M 10R - 1M 10R - 1M 10R - 1M
Chip Resistors Selection Charts
RT - Thin film high precision high stability chip resistors, 0402 to 2512
31
Schematics
Dimensions
Side view for all types
T
W1
W2
YC 102/122/162
H
B
P
L
YC 104/124/164/324
158/358/248
H
L
B
H1
a
a
P
L
TC 122
P
L
B
H
TC 124/164
B
Ha
a
P
unit: mm
Type H/H1B P L T W1W2
YC102 H: 0.35 ±0.10 0.20 ±0.10 0.50 ±0.05 0.80 ±0.10 0.35 ±0.10 0.15 ±0.10 0.60 ±0.10
YC104 H: 0.20 ±0.10 0.15 ±0.05 0.40
(Typical) 1.40 ±0.10 0.35 ±0.10 0.15 ±0.10 0.60 ±0.10
YC122 H:0.21+0.10/-0.05 0.20 ±0.10 0.67 ±0.05 1.00 ±0.10 0.30 ±0.10 0.25 ±0.10 1.00 ±0.10
YC124 H: 0.45 ±0.05
H
1
: 0.30 ±0.05 0.20 ±0.15 0.50 ±0.05 2.00 ±0.10 0.45 ±0.10 0.30 ±0.15 1.00 ±0.10
YC162 H: 0.30 ±0.10 0.30 ±0.10 0.80 ±0.05 1.60 ±0.10 0.40 ±0.10 0.30 ±0.10 1.60 ±0.10
YC164 H: 0.65 ±0.05
H
1
: 0.50 ±0.15 0.30 ±0.15 0.80 ±0.05 3.20 ±0.15 0.60 ±0.10 0.30 ±0.15 1.60 ±0.15
YC248 H: 0.45 ±0.05
H
1
: 0.30 ±0.05 0.30 ±0.15 0.50 ±0.05 4.00 ±0.20 0.45 ±0.10 0.40 ±0.15 1.60 ±0.15
YC324 H: 1.10 ±0.15
H
1
: 0.90 ±0.15 0.50 ±0.20 1.27 ±0.05 5.08 ±0.20 0.60 ±0.10 0.50 ±0.15 3.20 ±0.20
TC122 H: 0.30 ±0.05 0.25 ±0.15 0.50 ±0.05 1.00 ±0.10 0.30 ±0.10 0.25 ±0.15 1.00 ±0.10
TC122H H : 0.40 ±0.05 0.25 ±0.15 0.50 ±0.05 1.00 ±0.10 0.30 ±0.10 -- 1.00 ±0.10
TC122M H : 0.30 ±0.05 0.25 ±0.15 0.50 ±0.05 1.00 ±0.10 0.30 ±0.10 0.25 ±0.15 1.00 ±0.10
TC124 H: 0.30 ±0.10 0.20 ±0.10 0.50 ±0.05 2.00 ±0.10 0.40 ±0.10 0.25 ±0.10 1.00 ±0.10
TC124H H : 0.30 ±0.05 0.20 ±0.10 0.50 ±0.05 2.00 ±0.10 0.40 ±0.10 -- 1.00 ±0.10
TC124M H : 0.30 ±0.05 0.20 ±0.10 0.50 ±0.05 2.00 ±0.10 0.40 ±0.10 0.25 ±0.10 1.00 ±0.10
TC164 H: 0.60 ±0.15 0.30 ±0.15 0.80 ±0.05 3.20 ±0.15 0.60 ±0.10 0.30 ±0.15 1.60 ±0.15
YC158 H: 0.45±0.05
H1: 0.32±0.05 0.30 ±0.15 0.64 ±0.05 3.20 ±0.20 0.60 ±0.10 0.35 ±0.15 1.60 ±0.15
YC358 H: 1.10 ±0.15
H
1
: 0.90 ±0.15 0.50 ±0.15 1.27 ±0.05 6.40 ±0.20 0.60 ±0.10 0.50 ±0.15 3.20 ±0.20
Features
• Integrated discrete chip resistors from 2 to 8 pcs
• Moreefficientinpick&placeapplication
• Low assembly costs
• Reducedsizeoffinalequipment
• Higher component and equipment reliability
Chip Resistors Selection Charts
YC/TC - Thick film array / network chip resistors
Note: 1.YC104isflattype
32
Electrical characteristics
Type Power
P70
Operating Temp.
range MWV RCOV DWV Resistance range & tolerance T. C. R. Jumper criteria
(unit: A)
YC102 1/32W -55°Cto+125°C 15V 30V 30V E24 ±5%
E24/E96±1%
Jumper
10Ω≤R≤1MΩ
10Ω≤R≤1MΩ
<0.05Ω
±200ppm/°C
Rated current
Max. current 0.5
1.0
YC104 1/32W -55°Cto+125°C 12.5V 25V 25V E24 ±5%
E24/E96±1%
Jumper
10Ω≤R≤1MΩ
10Ω≤R≤1MΩ
<0.05Ω
Rated current
Max. current 0.5
1.0
YC122 1/16W -55°Cto+125°C 50V 100V 100V E24 ±5%
E24/E96±1%
Jumper
1Ω≤R≤1MΩ
10Ω≤R≤1MΩ
<0.05Ω
Rated current
Max. current 0.5
1.0
YC124 1/16W -55°Cto+155°C 25V 50V 100V E24 ±5%
E24/E96±1%
Jumper
1Ω≤R≤1MΩ
1Ω≤R≤1MΩ
<0.05Ω
1Ω≤R≤10Ω
10Ω≤R≤1MΩ
±250ppm/°C
±200ppm/°C
Rated current
Max. current 1.0
2.0
YC162 1/16W -55°Cto+125°C 50V 100V 100V E24 ±5%
Jumper 10Ω≤R≤1MΩ
<0.05Ω ±200ppm/°C Rated current
Max. current 1.0
2.0
YC164 1/16W -55°Cto+155°C 50V 100V 100V E24 ±5%
E24/E96±1%
Jumper
1Ω≤R≤1MΩ
1Ω≤R≤1MΩ
<0.05Ω
±200ppm/°C
Rated current
Max. current 1.0
2.0
YC248 1/16W -55°Cto+155°C 50V 100V 100V E24 ±5%
E24/E96±1%
Jumper
10Ω≤R≤1MΩ
10Ω≤R≤1MΩ
<0.05Ω
Rated current
Max. current 2.0
10.0
YC324 1/8W -55°Cto+155°C 200V 500V 500V E24 ±5%
E24/E96±1%
10Ω≤R≤1MΩ
10Ω≤R≤1MΩ -- --
TC122
1/16W -55°Cto+125°C 50V 100V 100V E24 ±5%
E24/E96±1%
Jumper
10Ω≤R≤1MΩ
10Ω≤R≤1MΩ
<0.05Ω
Rated current
Max. current 1.0
1.5
TC122H
TC122M
TC124
1/16W -55°Cto+125°C 50V 100V 100V E24 ±5%
E24/E96±1%
Jumper
10Ω≤R≤1MΩ
10Ω≤R≤1MΩ
<0.05Ω
Rated current
Max. current 1.0
1.5
TC124H
TC124M
TC164 1/16W -55°Cto+155°C 50V 100V 100V E24 ±5%
E24/E96±1%
Jumper
10Ω≤R≤1MΩ
10Ω≤R≤1MΩ
<0.05Ω
Rated current
Max. current 1.0
2.0
YC158 1/16W -55°Cto+155°C 25V 50V 50V E24 ±5% 10Ω≤R≤100KΩ -- --
YC358 1/16W -55°Cto+155°C 50V 100V 100V E24 ±5% 10Ω≤R≤330KΩ -- --
Environmental characteristics
Performance test Test method Procedure Requirements
Life MIL-STD-202G-
method 108A 1 000 hours at 70 ±5°C applied RCWV
1.5 hours on, 0.5 hours off, still air required ±(2%+0.05Ω)
<100mΩforjumper
High temperature exposure MIL-STD-202G-
method 108A 1 000 hours at maximum operating temperature
dependingonspecification,unpowered
±(1%+0.05Ω)
<50mΩforjumper
Moisture resistance MIL-STD-202G-
method 106F
Each temperature / humiditycycleisdefinedas8hours
(method106F),3cycles/24hoursfor10dwith
25°C/65°C95%R.H
±(2%+0.05Ω)
<100mΩforjumper
Thermal shock MIL-STD-202G-
method 107G LCT/UCT,numberofcyclesrequiredis300
Maximum transfer time is 20 seconds
±(0.5%+0.05Ω)for10Kto10M
±(1%+0.05Ω)forothers
<50mΩforjumper
Solderability
Wetting J-STD-002B
testB
Electricaltestnotrequired.Magnification50X
Lead-free solder bath at 245 ±3°C
Dipping time: 3 ±0.5 seconds Welltinned(≥95%covered)
Resistance to
soldering heat MIL-STD-202G-
method 210F Lead-free solder, 260°C, 10 seconds immersion time ±(1%+0.05Ω)
<50mΩforjumper
No visible damage
Short time overload MIL-R-55342D-
para 4.7.5 2.5 times RCWV or maximum overload voltage which-
ever is less for 5 seconds at room temperature
±(2%+0.05Ω)
<50mΩforjumper
No visible damage
Chip Resistors Selection Charts
YC/TC - Thick film array / network chip resistors
33
Global part number - Arrays
Ordering example: YC122-JR-07100KL
Y C 1 2 2 J R 0 7 1 0 0 K L
Series name (code 1-2) Default code (code 17)
YC = Array & Network
(convex/flat)thickfilm
TC=Array(concave)thickfilm Resistance (code 12-16)
0R = Jumper
Size code (inch) (code 3-4) 10R =10Ω
10 = 0201 x 2 (0202) 100R=100Ω
0201 x 4 (0204) 100K=100KΩ
12 = 0402 x 2 (0404)
0402 x 4 (0408) Taping reel (code 10-11)
16 = 0603 x 2 (0606) 07 = 7 inch Dia. reel
0603 x 4 (0612) 10 = 10 inch Dia. reel
24 = 0602 x 8 (0616) 13 = 13 inch Dia. reel
32 = 1206 x 4 (1224)
T. C. R. (code 9)
Number of resistors (code 5) “―”=Basedonspec.
2 = 2 resistors
4 = 4 resistors Packing style (code 8 )
8 = 8 resistors R = Paper tape reel
K = Embossed plastic tape reel
Schematic (code 6)
H = Reverse & Half type Tolerance (code 7)
M = Reverse type F = ±1%
"-"=Basedonspec. J = ±5% (for Jumper ordering)
Note:1.AllofourRSMDproductsareRoHScompliant."LFP"oftheinternal2Dreellabelmentions"LeadFreeProcess"
2. Letter L is system default code for ordering only
Phycomp worldwide - Traditional type
Arraythickfilmchipresistors
Size:inch/mm 2 X 0402 /
1 X 1 4 X 0402 /
2 X 1 8 X 0602 /
4.0 X 1.6 4 X 0603 /
3.2 X 1.3 4 X1206 /
5.2 X 3.1
Power 1/16W 1/16W 1/16W 1/16W 1/8W
Tolerance +5% +1% +5% +1% +5% +1% +5% +1% +5% +1% +5%
Type R-array/
R-network
(convex)
R-array/
R-network
(convex)
R-array/
R-network
(convex)
R-array/
R-network
(convex)
R-array/
R-network
(convex)
R-array/
R-network
(convex)
R-array/
R-network
(convex)
R-array/
R-network
(convex)
R-array/
R-network
R-network
(concave)
R-array/
R-network
(concave)
R-array/
R-network
(convex)
Resistance E24 E24/E96 E24 E24/E96 E24 E24/E96 E24 E24/E96 E24 E24/E96 E24
Packing paper tape paper tape paper tape paper tape blister tape
Quantity 4 000
--- --- --- --- --- --- --- --- --- --- 2350 039 10...L
5 000
--- --- --- --- 2350 053 10...L 2350 043 1....L 2350 035 10...L 2350 025 1....L 2350 034 10...L 2350 024 1...L ---
10 000
2350 013 11...L 2350 013 2....L 2350 033 11...L 2350 023 2....L --- --- --- --- --- --- ---
Jumper 5 000
--- --- --- --- 2350 053 91001L --- 2350 035 91001L --- 2350 034 91001L --- ---
10 000
2350 013 91001L --- 2350 033 91001L --- --- --- --- --- --- --- ---
For ordering rules: Seepage14forE24/E96valuesandthelast4or3digitsofthe12NCcataloguenumber
Phycomp CTC ordering code - Traditional type - North America
Regional code for ordering Phycomp branded products. Please see page 15 for details.
Chip Resistors Selection Charts
YC/TC - Arrays, convex / concave / flat
34
Global part number - Networks
Ordering example: YC158TJR-07100KL
Y C 1 5 8 T J R 0 7 1 0 0 K L
Series name (code 1-2) Default code (code 17)
YC=Array&Network(convex)thickfilm
Resistance (code 12-16)
Size code (inch) (code 3-4) 0R = Jumper
15=10Pin/8R(0612) 10R =10Ω
35=10Pin/8R(1225) 100R=100Ω
100K=100KΩ
Number of resistors (code 5)
8 = 8 resistors Taping reel (code 10-11)
07 = 7 inch Dia. reel
Schematic (code 6) 13 = 13 inch Dia. reel
L = L-type (for YC358)
T=T-type(forYC158/358) T. C. R. (code 9)
“―”=Basedonspec.
Packing style (code 8 )
R = Paper tape reel
K = Embossed plastic tape reel
Tolerance (code 7)
F = ±1%
J = ±5%
Note:1.AllofourRSMDproductsareRoHScompliant."LFP"oftheinternal2Dreellabelmentions"LeadFreeProcess"
2. Letter L is system default code for ordering only
Phycomp worldwide - Traditional type
Networkthickfilmchipresistors
Size: inch (mm) 0612 (1632) 1225 (3264)
Power 1/16W 1/16W
Tolerance +5% +5%
Type T-type10Pin/8R
PIN 5 and PIN 10 no resistance T-type10Pin/8R
PIN 5 and PIN 10 no resistance L-type10Pin/8R
PIN 1 and PIN 6 no resistance
Resistance E24 E24 E24
Packing paper tape blister tape
Quantity 4 000 --- 2350 201 10...L 2350 200 10...L
5 000 2350 230 10...L --- ---
For ordering rules: Seepage14forE24/E96valuesandthelast4or3digitsofthe12NCcataloguenumber
Phycomp CTC ordering code - Traditional type - North America
Regional code for ordering Phycomp branded products. Please see page 15 for details.
Chip Resistors Selection Charts
YC/TC - Networks, T-type / L-type
35
Chip Resistors Selection Charts
RL - Thick film low ohmic chip resistors, 0402 to 2512
Features
• Current sensing of desktop & notebook PC
• Resistancevaluesdownto0.01Ω
• Highly reliable multilayer electrode construction
• Low inductance
• High speed logic circuits
Derating curve Construction
Maximum dissipation (P) in percentage of
rated power as a function of the operating
ambient temperature (Tamb).
100
80
60
40
20
-55 -40 -20 0 20 40 60 80
70
100 120 140 160
Ambient Temperature (
C)
Rated Power (%)
125
Dimensions
m
Type L W H I1I2
RL0402 1.00 ±0.10 0.50 ±0.05 0.35 ±0.05 0.20 ±0.10 0.25 ±0.10
RL0603 1.60 ±0.10 0.80 ±0.10 0.45 ±0.10 0.25 ±0.15 0.25 ±0.15
RL0805 2.00 ±0.10 1.25 ±0.10 0.50 ±0.10 0.35 ±0.20 0.35 ±0.20
RL1206 3.10 ±0.10 1.60 ±0.10 0.55 ±0.10 0.45 ±0.20 0.45±0.20
RL1210 3.10 ±0.10 2.60 ±0.15 0.55 ±0.10 0.50 ±0.20 0.50 ±0.20
RL1218 3.05 ±0.15 4.60 ±0.20 0.55 ±0.10 0.45 ±0.25 0.50 ±0.25
RL2010 5.00 ±0.10 2.50 ±0.15 0.55 ±0.10 0.60 ±0.20 0.50 ±0.20
RL2512 6.35 ±0.10 3.20 ±0.15 0.55 ±0.10 0.60 ±0.20 0.50 ±0.20
overcoat
protective glass
resistive layer
inner electrode
termination (Ni / matte tin)
ceramic substrate
inner electrode
marking layer
36
Chip Resistors Selection Charts
RL - Thick film low ohmic chip resistors, 0402 to 2512
Electrical characteristics
Type Power
P70 Operating Temp.
range Resistance range & tolerance T. C. R.
(ppm/°C) Jumper criteria
RL0402 1/16W
-55°Cto+125°C E24 ±1%, ±2%, ±5%
50mΩ≤R<1Ω
See following table
“T.C.R.-RLseries”
Max. resistance
Rated current 20mΩ
1.5A
RL0603 1/10W 10mΩ≤R<1Ω Max. resistance
Rated current 20mΩ
2A
RL0805 1/8W 10mΩ≤R<1Ω Max. resistance
Rated current 20mΩ
2.5A
1/4W 10mΩ≤R<1Ω -- --
RL1206 1/4W 10mΩ≤R<1Ω Max. resistance
Rated current 20mΩ
3.5A
1/2W 10mΩ≤R<1Ω -- --
RL1210 1/2W 10mΩ≤R<1Ω -- --
RL1218 1W 10mΩ≤R<1Ω -- --
RL2010 3/4W 10mΩ≤R<1Ω -- --
RL2512 1W 10mΩ≤R<1Ω -- --
Note:Thepartialvaluesof25/40/50/60/250/400/500mΩarealsoavailable
T. C. R. - RL series
Type Operating
Temp. range Resistancec
range T. C. R.
50mΩ≤R<100mΩ 100mΩ≤R<500mΩ 500mΩ≤R<1Ω
RL0402 -55°Cto+125°C 50mΩ≤R<1Ω ±1000ppm/°C ±800ppm/°C ±300ppm/°C
10mΩ≤R≤36mΩ 36mΩ≤R≤91mΩ 91mΩ<R≤500mΩ 500mΩ<R<1Ω
RL0603 -55°Cto+125°C 10mΩ≤R<1Ω ±1500ppm/°C ±1200ppm/°C ±800ppm/°C ±300ppm/°C
10mΩ≤R≤18mΩ 18mΩ<R≤47mΩ 47mΩ<R≤91mΩ 91mΩ<R≤360mΩ 360mΩ<R≤500mΩ 500mΩ<R<1Ω
RL0805
-55°Cto+125°C 10mΩ≤R<1Ω ±1500ppm/°C ±1200ppm/°C ±1000ppm/°C ±600ppm/°C ±300ppm/°C ±200ppm/°C
RL1206
RL1210 ±1500ppm/°C ±1000ppm/°C ±800ppm/°C ±600ppm/°C ±300ppm/°C ±200ppm/°C
10mΩ≤R≤30mΩ 30mΩ<R≤56mΩ 56mΩ<R≤180mΩ 180mΩ<R<1Ω
RL1218 -55°Cto+125°C 10mΩ≤R<1Ω ±2000ppm/°C ±1000ppm/°C ±700ppm/°C ±250ppm/°C
10mΩ≤R≤18mΩ 18mΩ<R≤47mΩ 47mΩ<R≤91mΩ 91mΩ<R≤360mΩ 360mΩ<R≤500mΩ 500mΩ<R<1Ω
RL2010 -55°Cto+125°C 10mΩ≤R<1Ω ±1500ppm/°C ±1200ppm/°C ±1000ppm/°C ±600ppm/°C ±300ppm/°C ±200ppm/°C
RL2512 ±1500ppm/°C ±1200ppm/°C ±800ppm/°C ±600ppm/°C ±300ppm/°C ±200ppm/°C
Environmental characteristics
Performance test Test method Procedure Requirements
Life MIL-STD-202G-
method 108A 1 000 hours at 70°C ±5°C applied RCWV
1.5 hours on, 0.5 hours off, still air required ±2%
High temperature
exposure MIL-STD-202G-
method 108A 1 000 hours at maximum operating temperature
dependingonspecification,unpowered ±1%
Moisture resistance MIL-STD-202G-
method 106F Eachtemperature/humiditycycleisdefinedas8hours(method
106F),3cycles/24hoursfor10dwith25°C/65°C95%R.H ±2%
Thermal shock MIL-STD-202G-
method 107G LCT/UCT,numberofcyclesrequiredis300
Maximum transfer time is 20 seconds ±1%
Solderability
Wetting J-STD-002B
testB
Electricaltestnotrequired.Magnification50X
Lead-free solder bath at 245 ±3°C
Dipping time: 3 ±0.5 seconds
Well tinned
(≥95%covered)
No visible damage
Resistance to
soldering heat MIL-STD-202G-
method 210F Lead-free solder, 260°C, 10 seconds immersion time ±1%
No visible damage
Short time overload MIL-R-55342D-
para 4.7.5
RL standard power:
6.25 times of rated power for 5 seconds at room temperature
RL high power:
5 times of rated power for 5 seconds at room temperature
±2%
No visible damage
37
Chip Resistors Selection Charts
RL - Thick film low ohmic chip resistors, 0402 to 2512
Global part number - Preferred type
Ordering example: RL0603JR-070R01L
R L 0 6 0 3 J R 0 7 0 R 0 1 L
Series name (code 1-2) Default code(1/2) (code 17)
RL = Thick Film Low ohmic
Resistance (code 12-16)
Size code (code 3-6) 0R01=0.01Ω
(inch/metric) 0R1 =0.1Ω
0402 = 1.0 x 0.5 0R2 =0.2Ω
0603 = 1.6 x 0.8
0805 = 2.0 x 1.25 Taping reel (code 10-11)
1206 = 3.2 x 1.6 07 = 7 inch Dia. reel
1210 = 3.2 x 2.6 10 = 10 inch Dia. reel
1218 = 3.2 x 4.5 13 = 13 inch Dia. reel
2010 = 5.0 x 2.5
2512 = 6.35 x 3.2 T. C. R. (code 9)
“―”=Basedonspec.
Tolerance (code 7) (―forthickfilmonly)
F = ±1%
G = ±2% Packing style (code 8 )
J = ±5% R = Paper tape reel
K = Embossed plastic tape reel
Note:1.AllofourRSMDproductsareRoHScompliant."LFP"oftheinternal2Dreellabelmentions"LeadFreeProcess"
2. Letter L is system default code for ordering only
38
Chip Resistors Selection Charts
RL - Thick film low ohmic chip resistors, 0402 to 2512
Phycomp worldwide - Traditional type
Low ohmic chip resistors
Size: inch (mm) 0402 (1005) 0603 (1608) 0805 (2012) 1206 (3216)
Power 1/16W 1/10W 1/8W 1/4W
Tolerance +5% +1% +5% +1% +5% +1% +5% +1%
Resistance E24 E24 E24 E24 E24 E24 E24 E24
Packing paper tape paper tape paper tape paper tape
Quantity 5 000 --- --- 2350 512 10…L 2350 512 12…L 2350 511 10…L 2350 511 12…L 2350 510 10…L 2350 510 12…L
10 000 2350 513 20…L 2350 513 22…L --- --- --- --- --- ---
For ordering rules: Seepage14forE24/E96valuesandthelast4or3digitsofthe12NCcataloguenumber
Phycomp worldwide - Traditional type
Low ohmic chip resistors
Size: inch (mm) 1210 (3225) 1218 (3248) 2010 (5025) 2512 (6432)
Power 1/2W 1 W 3/4W 1 W
Tolerance +5% +1% +5% +1% +5% +1% +5% +1%
Resistance E24 E24 E24 E24 E24 E24 E24 E24
Packing paper tape blister tape blister tape blister tape
Quantity 4 000
--- --- 2322 735 64…L 2322 735 7….L 232276090..0L/60..7L 232276190..0L/6...7L 232276290..0L/60..7L 232276390..0L/6...7L
5 000
239073590..0L/60..7L 2390 735 3….L --- --- --- --- --- ---
For ordering rules: Seepage14forE24/E96valuesandthelast4or3digitsofthe12NCcataloguenumber
Phycomp CTC ordering code - Traditional type - North America
Regional code for ordering Phycomp branded products. Please see page 15 for details.
39
Global part number - Preferred type
Ordering example: RL0805JR-7W0R01L
R L 0 8 0 5 J R 7 W 0 R 0 1 L
Series name (code 1-2) Default code (code 17)
RL=Thickfilmlowohmic
Resistance (code 12-16)
Size code (code 3-6) 0R01=0.01Ω
(inch/metric) 0R1 =0.1Ω
0805 = 2.0 x 1.25 0R2 =0.2Ω
1206 = 3.2 x 1.6
Taping reel (code 10-11)
Tolerance (code 7) 7W = 7 inch Dia. reel and
2 x standard power type
F = ±1%
G = ±2%
J = ±5%
Packing style (code 8 ) T. C. R. (code 9)
R = Paper tape reel “―”=Basedonspec.
(―forthickfilmonly)
Note:1.AllofourRSMDproductsareRoHScompliant."LFP"oftheinternal2Dreellabelmentions"LeadFreeProcess"
2. Letter L is system default code for ordering only
Phycomp worldwide - Traditional type
Low ohmic high power chip resistors
Size: inch (mm) 0805 (2012) 1206 (3216)
Power 1/4W 1/2W
Tolerance +5% +1% +5% +1%
Resistance E24 E24/E96 E24 E24/E96
Packing paper tape paper tape
Quantity 5 000 2350 511 15…L 2350 511 17…L 2350 519 01…L 2350 519 1.…L
For ordering rules: Seepage14forE24/E96valuesandthelast4or3digitsofthe12NCcataloguenumber
Phycomp CTC ordering code - Traditional type - North America
Regional code for ordering Phycomp branded products. Please see page 15 for details.
Chip Resistors Selection Charts
RL - Thick film low ohmic, high power chip resistors, 0402 / 1206
40
Chip Resistors Selection Charts
PT - Thick film low ohmic low T. C. R. chip resistors, 0402 to 2512
Features
• Excellent T. C. R.
• Precision current sensing control
• Excellent performance for current sensing applications
• Low ohmic and high power
Derating curve Construction
Maximum dissipation (P) in percentage of
rated power as a function of the operating
ambient temperature (Tamb).
100
80
60
40
20
-55 -40 -20 0 20 40 60 80
70
100 120 140 160
Ambient Temperature (
C)
Rated Power (%)
155
Dimensions
W
unit: m
m
I2I2
I1
I1
L
H
Type L W H l1l2
PT0402 1.00 ±0.10 0.50 ±0.05 0.35 ±0.05 0.20 ±0.10 0.25 ±0.10
PT0603 1.60 ±0.10 0.80 ±0.10 0.45 ±0.10 0.25 ±0.15 0.25 ±0.15
PT0805 2.00 ±0.10 1.25 ±0.10 0.55 ±0.10 0.35 ±0.20 0.35 ±0.20
PT1206
(50mΩ≤R<75mΩ
&91mΩ≤R<1Ω)
3.10 ±0.10 1.60 ±0.10 0.55 ±0.10 0.45 ±0.20 0.45 ±0.20
PT1206
(75mΩ≤R<91mΩ) 3.10±0.10 1.60±0.10 0.55±0.10 0.75±0.20 0.45±0.20
PT2010 5.00 ±0.10 2.50 ±0.15 0.55 ±0.10 0.60 ±0.20 0.50 ±0.20
PT2512 6.35 ±0.10 3.20 ±0.15 0.55 ±0.10 0.60 ±0.20 0.50 ±0.20
Note: For relevant physical dimensions, please refer to above construction outlines
Pleasecontactoursalesoffices,distributorsandrepresentativesinyourregionbeforeordering
overcoat
protective glass
resistive layer
inner electrode
termination (Ni / matte tin)
ceramic substrate
inner electrode
marking layer
41
Electrical characteristics
Type Power
P70
Operating Temp.
range Max.
working voltage Tolerance Resistance range & T. C. R. Jumper criteria
PT0402
1/16W
-55°Cto+155°C (PxR)^1/2 E24 ±2%, ±5%
E24/E96±1%
50mΩ≤R<68mΩ
68mΩ≤R<100mΩ
100mΩ≤R<1Ω
±600ppm/°C
±300ppm/°C
±200ppm/°C Max. resistance
Rated current 5mΩ
3A
1/8W
1/6W 68mΩ±300ppm/°C
PT0603
1/10W 50
50 < R < 68
68≤R<100mΩ
100mΩ≤R<1Ω
0/+400ppm/°C
0/+350ppm/°C
0/+300ppm/°C
±200ppm/°C Max. resistance
Rated current 8mΩ
5A
1/5W
1/3W
50
50 < R < 68
68
0/+400ppm/°C
0/+350ppm/°C
0/+300ppm/°C
PT0805
1/8W 50
50 < R < 68
68≤R<100mΩ
100mΩ≤R<1Ω
0/+350ppm/°C
0/+300ppm/°C
0/+250ppm/°C
±100ppm/°C
Max. resistance
Rated current 5mΩ
6A
1/4W
PT1206
1/4W 50mΩ≤R<75mΩ
75mΩ≤R≤100mΩ
100mΩ<R<1Ω
±350ppm
±100ppm
±75ppm
Max. resistance
Rated current 5mΩ
10A
1/2W
PT2010 3/4W
100mΩ
100mΩ<R<1Ω
±100ppm/°C
±75ppm/°C
Max. resistance
Rated current ---
---
1W
PT2512 1W Max. resistance
Rated current ---
---
2W
Environmental characteristics
Performance test Test method Procedure Requirements
Life MIL-STD-202G-
method 108A 1 000 hours at 70 ±5°C applied RCWV
1.5 hours on, 0.5 hours off, still air required ±(1%+0.0005Ω)
<20mΩforjumper
High temperature exposure MIL-STD-202G-
method 108A 1 000 hours at maximum operating temperature depending on
specification,unpowered
±(1%+0.0005Ω)
<20mΩforjumper
Moisture resistance MIL-STD-202G-
method 106F Eachtemperature/humiditycycleisdefinedas8hours(method
106F),3cycles/24hoursfor10dwith25°C/65°C95%R.H
±(0.5%+0.0005Ω)
<20mΩforjumper
Thermal shock MIL-STD-202G-
method 107G LCT/UCT,numberofcyclesrequiredis300
Maximum transfer time is 20 seconds ±(1%+0.0005Ω)
<10mΩforjumper
Solderability
Wetting J-STD-002B
testB
Electricaltestnotrequired.Magnification50X
Lead-free solder bath at 245 ±3°C
Dipping time: 3 ±0.5 seconds
Well tinned
(≥95%covered)
No visible damage
Resistance to
soldering heat MIL-STD-202G-
method 210F Lead-free solder, 260°C, 10 seconds immersion time ±(0.5%+0.0005Ω)
No visible damage
<10mΩforjumper
Short time overload MIL-R-55342D-
para 4.7.5
PT standard power:
6.25 times of rated power for 5 seconds at room temperature
PT high power:
5 times of rated power for 5 seconds at room temperature
PTjumper:
2.5 times of rated current for 5 seconds at room temperature
±(1%+0.0005Ω)
No visible damage
<10mΩforjumper
Chip Resistors Selection Charts
PT - Thick film low ohmic low T. C. R. chip resistors, 0402 to 2512
42
Chip Resistors Selection Charts
PT - Thick film low ohmic low T. C. R. chip resistors, 0402 to 2512
Global part number - Preferred type
Ordering example: PT2512FK-070R01L
P T 2 5 1 2 F K 0 7 0 R 0 1 L
Series name (code 1-2) Default code(1/2) (code 17)
PT=ThickfilmlowohmiclowT.C.R.
Resistance (code 12-16)
Size code (code 3-6) 0R = Jumper
(inch/metric) 0R1= 0.1Ω
0402 = 1.0 x 0.5 0R2= 0.2Ω
0603 = 1.6 x 0.8
0805 = 2.0 x 1.25 Taping reel (code 10-11)
1206 = 3.2 x 1.6 07 = 7 inch Dia. reel
2010 = 5.0 x 2.5 13 = 13 inch Dia. reel
2512 = 6.35 x 3.2 7W = 7 inch Dia. reel and
2 x standard power type
Tolerance (code 7) 7T = 7 inch Dia. reel and
3 x standard power type
F = ± 1%
G = ± 2%
J = ± 5% T. C. R. (code 9)
“―”forJumperordering “―”=Basedonspec.
Packing style (code 8 )
R = Paper tape reel
K = Embossed plastic tape reel
Note:1.AllofourRSMDproductsareRoHScompliant."LFP"oftheinternal2Dreellabelmentions"LeadFreeProcess"
2. Letter L is system default code for ordering only
 3.PTseriesproductsareavailableby"Globalpartnumber"only
Phycomp CTC ordering code - Traditional type - North America
Regional code for ordering Phycomp branded products. Please see page 15 for details.
43
Derating curve Construction
Maximum dissipation (P) in percentage of
rated power as a function of the operating
ambient temperature (Tamb).
100
80
60
40
20
-55 -40 -20 0 20 40 60 80
70
100 120 140 160
Ambient Temperature (
C)
Rated Power (%)
155
Dimensions
Type L W H I1I2
PT0815 2.00 ±0.10 3.70 ±0.10 0.50 ±0.10 0.35 ±0.20 0.40 ±0.20
Chip Resistors Selection Charts
PT - Thick film low ohmic low T. C. R. chip resistors, wide termination, 0815
Features
• Excellent T. C. R.
• Precision current sensing control
• Excellent performance for current sensing applications
• Low ohmic and high power
I1
L
W
protective coat
marking layer
resistive layer
inner electrode
termination (Ni / matte tin)
ceramic substrate
I2
H
44
Chip Resistors Selection Charts
PT - Thick film low ohmic low T. C. R. chip resistors, wide termination, 0815
Electrical characteristics
Type Power
P70 Operating Temp.
range Max.
working voltage Tolerance Resistance range & T. C. R.
PT0815 1/2W -55°Cto+155°C (PxR)^1/2 E24 ±2%, ±5%
E24/E96±1% 25mΩ≤R≤50mΩ ±100ppm/°C
1W
Environmental characteristics
Performance test Test method Procedure Requirements
Life MIL-STD-202G-
method 108A 1 000 hours at 70 ±5°C applied RCWV
1.5 hours on, 0.5 hours off, still air required ±(1%+0.0005Ω)
High temperature exposure MIL-STD-202G-
method 108A 1 000 hours at maximum operating temperature
dependingonspecification,unpowered ±(1%+0.0005Ω)
Moisture resistance MIL-STD-202G-
method 106F
Eachtemperature/humiditycycleisdefinedas
8hours(method106F),3cycles/24hours
for10dwith25°C/65°C95%R.H
±(0.5%+0.0005Ω)
Solderability
Wetting J-STD-002B
testB
Electricaltestnotrequired.Magnification50X
Lead-free solder bath at 245 ±3°C
Dipping time: 3 ±0.5 seconds
Welltinned(≥95%covered)
No visible damage
Resistance to
soldering heat MIL-STD-202G-
method 210F Lead-free solder, 260°C, 10 seconds immersion time ±(0.5%+0.0005Ω)
No visible damage
Short time overload MIL-R-55342D-
para 4.7.5
PT standard power:
6.25 times of rated power for 5 seconds at room
temperature
PT high power:
5 times of rated power for 5 seconds at room temperature
±(1%+0.0005Ω)
No visible damage
45
Global part number - Preferred type
Ordering example: PT0815FK-070R01L
P T 0 8 1 5 F K 0 7 0 R 0 1 L
Series name (code 1-2) Default code(1/2) (code 17)
PT=ThickfilmlowohmiclowT.C.R.
Resistance (code 12-16)
Size code (code 3-6) 0R025=0.025Ω
(inch/metric) 0R05=0.05Ω
0815 = 2.00 x 3.70
Taping reel (code 10-11)
Tolerance (code 7) 07 = 7 inch Dia. reel
F = ±1% 7W = 7 inch Dia. reel and
2 x standard power type
G = ±2%
J = ±5%
T. C. R. (code 9)
Packing style (code 8 ) “―”=baseonspec
K = Embossed plastic tape reel
Note:1.AllofourRSMDproductsareRoHScompliant."LFP"oftheinternal2Dreellabelmentions"LeadFreeProcess"
2. Letter L is system default code for ordering only
 3.PTseriesproductsareavailableby"Globalpartnumber"only
Chip Resistors Selection Charts
PT - Thick film low ohmic low T. C. R. chip resistors, wide termination, 0815
46
Derating curve Construction
Maximum dissipation (P) in percentage of
rated power as a function of the operating
ambient temperature (Tamb).
100
80
60
40
20
-55-40 -20020 40 60 80
70
100120 140 160 180
Ambient Temperature (
C)
Rated Power (%)
155 170
PA, PH series
PE/PF 0402
PR series
PE/PF 0603 ~ 4527
Dimensions
PR series unit: mm
Type Resistance range L W H l1l2
PR1206 1mΩ≤R≤6mΩ 3.20 ±0.25 1.60 ±0.25 0.64 ±0.25 0.50 ±0.25 0.50 ±0.25
PR2010 1mΩ≤R≤3mΩ 5.10 ±0.25 2.54 ±0.25 0.80 ±0.25 1.30 ±0.25 1.30 ±0.25
4mΩ≤R≤100mΩ 5.10 ±0.25 2.54 ±0.25 0.64 ±0.25 0.80 ±0.25 0.80 ±0.25
PR2512 (1) 1mΩ≤R≤2mΩ 6.40 ±0.20 3.20 ±0.20 0.75 ±0.15 1.20 ±0.20 1.20 ±0.20
3mΩ≤R≤5mΩ 0.55 ±0.10 0.60 ±0.20 0.60 ±0.20
PR2512 (2) 0.5mΩ≤R≤4mΩ 6.25 ±0.25 3.30 ±0.25 0.78 ±0.25 1.88 ±0.25 1.88 ±0.25
5mΩ≤R≤75mΩ 0.64 ±0.25 1.11 ±0.25 1.11 ±0.25
PA series unit: mm
Type Resistance range L W H l1l2
PA2512 1mΩ≤R≤10mΩ 6.50 ±0.20 3.20 ±0.20 0.65 ±0.15 0.90 ±0.20 0.90 ±0.20
Note: 1.Applytoorderingcodesendingin“L”
 2.Applytoorderingcodesendingin“Z”
 Pleasecontactsalesoffices,distributorsandrepresentativesinyourregionbeforeordering
Chip Resistors Selection Charts
PR/PA/PF/PH/PE - Current sensors - low T. C. R. chip resistors, 0402 to 4527
PR/PA series
Features
• ExcellentT.C.R.comparedtothickfilmlowohmic
• Precision current sensing control
• Excellent performance for current sensing applications
• Ultralowohmicdownto0.0005Ω
Note: constructionwillbeadjustedtoresistance
value (only for PF series).
47
Chip Resistors Selection Charts
PR/PA/PF/PH/PE - Current sensors - low T. C. R. chip resistors, 0402 to 4527
Dimensions
PF / PH / PE series unit: mm
Type Resistance range L W H l1l2
PF/PE0402 10mΩ R 50mΩ 1.00 ± 0.30 0.50 ± 0.20 0.45 ± 0.20 0.25 ± 0.10 ---
PF/PE0603(2) 5mΩ≤R<100mΩ 1.60 ± 0.20 0.80 ± 0.20 0.60 ± 0.15 --- 0.30 ± 0.15
PF/PH0805(1) 10mΩ<R≤50mΩ 2.03 ± 0.25 1.27 ± 0.25 0.33 ± 0.12 0.38 ± 0.25 0.38 ± 0.25
PF/PH/PE0805 3mΩ 2.10 ± 0.20 1.35 ± 0.20 0.65 ± 0.20 0.75 ± 0.15 ---
PF/PH/PE0805(2)
4mΩ
2.00 ± 0.20 1.25 ± 0.20 0.60 ± 0.15 ---
0.70 ± 0.15
5mΩ 0.63 ± 0.15
6mΩ≤R≤7mΩ 0.55 ± 0.15
8mΩ≤R<100mΩ 0.40 ± 0.15
PF/PH1206(1) 10mΩ<R≤50mΩ 3.20 ± 0.25 1.60 ± 0.25 0.60 ± 0.25 0.50 ± 0.25 0.65 ± 0.25
PF/PH/PE1206(2)
3mΩ
3.20 ± 0.20 1.60 ± 0.20 0.60 ± 0.15 ---
1.30 ± 0.20
4mΩ 1.20 ± 0.20
5mΩ≤R≤8mΩ 1.15 ± 0.20
9mΩ≤R<100mΩ 0.58 ± 0.20
PF/PE2010 5mΩ≤R≤9mΩ 5.00 ± 0.20 2.50 ± 0.20 0.60 ± 0.15 --- 1.50 ± 0.20
10mΩ≤R<100mΩ 0.60 ± 0.20
PF2512 (1)
6mΩ
6.45 ± 0.25 3.25 ± 0.25 0.70 ±0 .25
0.75 ± 0.25 1.85 ± 0.25
7mΩ≤R≤15mΩ 1.55 ± 0.25
20mΩ≤R≤50mΩ(1W) 1.30 ± 0.25 0.75 ± 0.25
20mΩ≤R≤50mΩ(2W) 0.75 ± 0.25 1.30 ± 0.25
PF/PE2512(2)
1mΩ
6.30 ± 0.20 3.10 ± 0.20 0.60 ± 0.15 ---
2.93 ± 0.20
2mΩ 2.70 ± 0.20
3mΩ 2.50 ± 0.20
4mΩ 2.15 ± 0.20
5mΩ 1.95 ± 0.20
6mΩ≤R≤8mΩ 1.90 ± 0.20
9mΩ≤R<100mΩ 0.95 ± 0.20
PF/PE4527 5mΩ 11.50±0.20 7.00±0.20 0.60±0.15 2.90±0.20 ---
6mΩ≤R<1Ω 11.50 ± 0.20 7.00 ± 0.20 0.60 ± 0.15 --- 2.60 ± 0.20
Note: 1.Applytoorderingcodesendingin“L”
2.Applytoorderingcodesendingin“Z”
3. For relevant physical dimensions, please refer to above construction outlines
Pleasecontactwithsalesoffices,distributorsandrepresentativesinyourregionbeforeordering
48
Electrical characteristics
Type Technology Size Power
P70 Operating Temp.
range Max.
working voltage Tolerance Resistance range Min.
T. C. R.
PE Metal Foil
0402
1/16W
-55°C to 155°C
(PxR)^1/2
±1%
±2%
±5%
10mΩ R 50mΩ ±100ppm/°C1/8W
1/4W
0603
1/10W
-55°C to 170°C
5mΩ R<100mΩ
±50ppm/°C
±75ppm/°C
±100ppm/°C
1/5W
1/3W
2/5W
1/2W
0805
1/8W
3mΩ R<100mΩ
1/4W
1/3W
1/2W
1206
1/4W
3mΩ R<100mΩ1/2W
1W
2010 1/2W 5mΩ R<100mΩ
1W
2512
1W
6mΩ R<100mΩ2W
3W
4527
2W
5mΩ R<1Ω3W
5W
PF
Metal Foil
0402
1/16W
-55°C to 155°C
(PxR)^1/2
±1%
±2%
±5%
10mΩ≤R≤50mΩ ±100ppm/°C
1/8W
1/4W
0603
1/10W
-55°C to 170°C
5mΩ≤R<100mΩ
±50ppm/°C
±75ppm/°C
±100ppm/°C
1/5W
1/3W
2/5W
1/2W
0805
1/8W
3mΩ≤R<100mΩ
1/4W
1/3W
1/2W
1206
1/4W
3mΩ≤R<100mΩ1/2W
1W
2010 1/2W 5mΩ≤R<100mΩ
1W
2512
1W
6mΩ≤R<100mΩ2W
3W
4527
2W
5mΩ≤R<1Ω3W
5W
PH Metal Foil 0805 4/5W -55°C to 155°C (PxR)^1/2 ±1%, ±2%, ±5% 4mΩ≤R≤50mΩ
1206 1W
Note: Pleasecontactwithsalesoffices,distributorsandrepresentativesinyourregionbeforeordering
Chip Resistors Selection Charts
PR/PA/PF/PH/PE - Current sensors - low T. C. R. chip resistors, 0402 to 2512
49
Electrical characteristics
Type Technology Size Power
P70 Operating Temp.
range Max.
working voltage Tolerance Resistance range Min.
T. C. R.
PR Metal Plate
1206
1/4W
-55°C to 170°C (PxR)^1/2
±1%, ±2%, ±5% 1mΩ≤R≤6mΩ
±50ppm/°C
1/2W
1W
2010 1/2W ±1%, ±2%, ±5% 1mΩ≤R<100mΩ
1W
2512
1W
±0.5% 7mΩ≤R≤75mΩ
±1%, ±2%, ±5% 0.5mΩ≤R≤2mΩ ±200ppm/°C
3mΩ≤R≤5mΩ ±100ppm/°C
2W
±0.5% 7mΩ≤R≤75mΩ ±50ppm/°C
±1%, ±2%, ±5% 0.5mΩ≤R≤2mΩ ±200ppm/°C
3mΩ≤R≤5mΩ ±100ppm/°C
3W ±1%, ±2%, ±5% 0.5mΩ≤R≤10mΩ ±50ppm/°C
PA Metal Plate 2512
1W
-55°C to 155°C (PxR)^1/2 ±1%, ±5% 1mΩ≤R≤10mΩ ±100ppm/°C
2W
3W
Note: Pleasecontactwithsalesoffices,distributorsandrepresentativesinyourregionbeforeordering
Environmental characteristics
Performance test Test method Procedure Requirements
Life MIL-STD-202G-
method 108A 1 000 hours at 70 ±5°C applied RCWV
1.5 hours on, 0.5 hours off, still air required ±(1%+0.0005Ω)
High temperature exposure MIL-STD-202G-
method 108A 1 000 hours at maximum operating temperature depending on
specification,unpowered ±(1%+0.0005Ω)
Moisture resistance MIL-STD-202G-
method 106F Eachtemperature/humiditycycleisdefinedas8hours(method
106F),3cycles/24hoursfor10dwith25°C/65°C95%R.H ±(0.5%+0.0005Ω)
Thermal shock MIL-STD-202G-
method 107G LCT/UCT,numberofcyclesrequiredis300
Maximum transfer time is 20 seconds ±(0.5%+0.0005Ω)
Solder-
ability
Wetting J-STD-002B
testB
Electricaltestnotrequired.Magnification50X
Lead-free solder bath at 245 ±3°C
Dipping time: 3 ±0.5 seconds
Well tinned
(≥95%covered)
Resistance to
soldering heat MIL-STD-202G-
method 210F Lead-free solder, 260°C, 10 seconds immersion time ±(0.5%+0.0005Ω)
No visible damage
Short time overload MIL-R-55342D-
para 4.7.5 5 times of rated power for 5 seconds at room temperature ±(0.5%+0.0005Ω)
No visible damage
Chip Resistors Selection Charts
PR/PA/PF/PH/PE - Current sensors - low T. C. R. chip resistors, 0402 to 4527
50
Global part number - Preferred type
Ordering example: PF2512FKF070R01L
P F 2 5 1 2 F K F 0 7 0 R 0 1 L
Series name (code 1-2) Default code(1/2) (code 17)
PR/PA/PF/PH/PE=Currentsensors-lowT.C.R.
L/Z=Defaultcode
Size code (code 3-6) Resistance (code 12-16)
(inch/metric) 0U5=0.0005Ω
0402 = 1.0 x 0.5 0R01=0.01Ω
0603 = 1.6 x 0.8 0R1 =0.1Ω
0805 = 2.0 x 1.25 0R2 =0.2Ω
1206 = 3.2 x 1.6
2010 = 5.0 x 2.5 Taping reel (code 10-11)
2512 = 6.35 x 3.2 07 = 7 inch Dia. reel
4527 = 11.0 x 7.0 7W = 7 inch Dia. reel
2 x standard power type
Tolerance (code 7) 7T = 7 inch Dia. reel
F = ±1% 3 x standard power type
G = ±2% 47 = 7 inch Dia. reel
J = ±5% 4 x standard power type
57 = 7 inch Dia. reel
Packing style (code 8 ) 5 x standard power type
R = Paper tape reel
K = Embossed plastic tape reel T. C. R. (code 9)
E=±50ppm/°C
M=±75ppm/°C
F=±100ppm/°C
G=±200ppm/°C
Note:1.AllofourRSMDproductsareRoHScompliant."LFP"oftheinternal2Dreellabelmentions"LeadFreeProcess"
 2.PHseriesproductsareavailableby"Globalpartnumber"only
Phycomp worldwide - Traditional type
CurrentSensor-LowT.C.R./PRseries
Size: inch (mm) 2010 (5025) 2512 (6432)
Power 1/2W 1 W 1 W 2 W
Tolerance +5% +1% +5% +1% +5% +1% +5% +1%
Packing blister tape blister tape
Quantity 4 000 2322 760 63..0L 2322 761 11.. 0L 2322 760 65.. 0L 2322 761 13.. 0L 2322 762 94..0L 2322 763 95..0L 2322 762 10..0L 2322 763 10..0L
For ordering rules: Seepage14forE24/E96valuesandthelast4or3digitsofthe12NCcataloguenumber
Phycomp worldwide - Traditional type
CurrentSensor-LowT.C.R./PFseries
Size: inch (mm) 2512 (6432)
Power 1 W 2 W
Tolerance +5% +1% +5% +1%
Packing blister tape
Quantity 4 000 2322 764 96..L 2322 764 97..L 2322 764 10..L 2322 764 30..L
For ordering rules: Seepage14forE24/E96valuesandthelast4or3digitsofthe12NCcataloguenumber
Phycomp CTC ordering code - Traditional type - North America
Regional code for ordering Phycomp branded products. Please see page 15 for details.
Chip Resistors Selection Charts
PR/PA/PF/PH/PE - Current sensors - low T. C. R. chip resistors, 0402 to 2512
51
Derating curve Construction
Maximum dissipation (P) in percentage of
rated power as a function of the operating
ambient temperature (Tamb).
100
80
60
40
20
-55-40 -20020 40 60 80
70
100120 140 160 180
Ambient Temperature (
C)
Rated Power (%)
170
Dimensions
Type Resistance range L W H l1l2
PE/PF0612(2)
1mΩ 1.60 ±0.20 0.32 ±0.20 0.60 ±0.15 --- 0.55±0.20
2mΩ≤R≤4mΩ 1.60 ±0.20 0.32 ±0.20 0.60 ±0.15 --- 0.40±0.20
5mΩ≤R≤300mΩ 1.60 ±0.20 0.32 ±0.20 0.60 ±0.15 --- 0.30±0.15
PE/PF0815(2)
1mΩ 2.50±0.20 3.70±0.20 0.60±0.15 --- 0.95±0.20
2mΩ 2.50±0.20 3.70±0.20 0.60±0.15 --- 0.75±0.20
3mΩ R 100mΩ 2.50±0.20 3.70±0.20 0.60±0.15 --- 0.60±0.20
PE/PF0815 (1) 10/15/20mΩ 2.15 ±0.20 3.75 ±0.25 0.65 ±0.25 0.65 ±0.25 0.70 ±0.25
PE/PF0830 (2)
6/8/10mΩ 2.00 ±0.20 7.50 ±0.30 0.60 ±0.15 --- 0.60 ±0.15
1mΩ≤R≤100mΩ
(except6/8/10mΩ) 2.50 ±0.20 7.50 ±0.30 0.60 ±0.15 --- 0.58 ±0.15
Note: 1.Applytoorderingcodesendingin“L”
 2.Applytoorderingcodesendingin“Z”
 Pleasecontactsalesoffices,distributorsandrepresentativesinyourregionbeforeordering
Chip Resistors Selection Charts
PE/PF - Current sensors - low T. C. R. chip resistors, wide termination, 0612 to 0830
Features
• ExcellentT.C.R.comparedtothickfilmlowohmic
• Precision current sensing control
• Excellent performance for current sensing applications
• Low ohmic and high power
52
Electrical characteristics
Type Technology Size Power
P70 Operating Temp.
range Max.
working voltage Tolerance Resistance range & T. C. R.
PF Metal Foil
wide termination
0612 1W
-55°C to 170°C (PxR)^1/2 ±1%, ±2%, ±5% 1mΩ≤R≤300mΩ
1mΩ≤R≤100mΩ
1mΩ≤R≤100mΩ
±75ppm/°C
±100ppm/°C
2W
0815 1/2W
1W
0830 2W
3W
PE Metal Foil
wide termination
0612 1W
-55°C to 170°C (PxR)^1/2 ±1%, ±2%, ±5% 1mΩ≤R≤300mΩ
1mΩ≤R≤100mΩ
1mΩ≤R≤100mΩ
±75ppm/°C
±100ppm/°C
2W
0815 1/2W
1W
0830 2W
3W
Note:Pleasecontactwithsalesoffices,distributorsandrepresentativesinyourregionbeforeordering
Environmental characteristics
Performance test Test method Procedure Requirements
Life MIL-STD-202G-
method 108A 1 000 hours at 70 ±5°C applied RCWV
1.5 hours on, 0.5 hours off, still air required ±(1%+0.0005Ω)
High temperature exposure MIL-STD-202G-
method 108A 1 000 hours at maximum operating temperature
dependingonspecification,unpowered ±(1%+0.0005Ω)
Moisture resistance MIL-STD-202G-
method 106F
Eachtemperature/humiditycycleisdefinedas
8hours(method106F),3cycles/24hours
for10dwith25°C/65°C95%R.H
±(0.5%+0.0005Ω)
Solderability
Wetting J-STD-002B testB Electricaltestnotrequired.Magnification50X
Lead-free solder bath at 245 ±3°C
Dipping time: 3 ±0.5 seconds
Well tinned
(≥95%covered)
Resistance to
soldering heat MIL-STD-202G-
method 210F Lead-free solder, 260°C, 10 seconds immersion time ±(0.5%+0.0005Ω)
No visible damage
Short time overload MIL-R-55342D-
para 4.7.5 5 times of rated power for 5 seconds at room temperature ±(0.5%+0.0005Ω)
No visible damage
Chip Resistors Selection Charts
PE/PF - Current sensors - low T. C. R. chip resistors, wide termination, 0612 to 0830
53
Global part number - Preferred type
Ordering example: PF0815FKF070R01L
P F 0 8 1 5 F K F 0 7 0 R 0 1 L
Series name (code 1-2) Default code(1/2) (code 17)
PE/PF=currentsensors-lowT.C.R.,
wide termination
L/Z=Defaultcode
Resistance (code 12-16)
Size code (code 3-6) 0R01=0.01Ω
(inch/metric) 0R02=0.02Ω
0612 = 1.6 x 3.2
0815 = 2.15 x 3.75 Taping reel (code 10-11)
0830 = 2.0 x 7.5 07 = 7 inch Dia. reel
7W = 7 inch Dia. reel
Tolerance (code 7) 2 x standard power type
F = ±1%
G = ±2% T. C. R. (code 9)
J = ±5% M=±75ppm/°C
F=±100ppm/°C
Packing style (code 8 )
K = Embossed plastic tape reel
Note:1.AllofourRSMDproductsareRoHScompliant."LFP"oftheinternal2Dreellabelmentions"LeadFreeProcess"
 2.PFserieswideterminationtypeproductsareavailableby"Globalpartnumber"only
Chip Resistors Selection Charts
PE/PF - Current sensors - low T. C. R. chip resistors, wide termination, 0612 to 0830
54
Derating curve Construction
Maximum dissipation (P) in percentage of
rated power as a function of the operating
ambient temperature (Tamb).
100
80
60
40
20
-55-40 -20020 40 60 80
70
100120 140 160
180
Ambient Temperature (
C)
Rated Power (%)
155 170
0306
0508, 0612, 1225
Dimensions
Type L W a D c H
PS0306 0.80±0.20 1.60±0.20 0.25±0.20 0.30±0.15 0.30±0.15 0.55±0.20
PS0508 1.25±0.20 2.00±0.20 0.25±0.20 0.20±0.15 0.30±0.20 0.55±0.20
PS0612 1.50±0.25 3.15±0.25 0.35±0.20 0.38±0.20 0.66±0.20 0.75±0.25
Type L W A B H
PS1225 3.10±0.20 6.30±0.20 0.80±0.20 2.20±0.20 0.60±0.15
Note: Applytoorderingcodesendingin“Z”
 Pleasecontactsalesoffices,distributorsandrepresentativesinyourregionbeforeordering
Chip Resistors Selection Charts
PS - Current sensors - low T.C.R. chip resistors, 4 termination, 0306 to 1225
Features
• ExcellentT.C.R.comparedtothickfilmlowohmic
• Precision current sensing control
• Excellent performance for current sensing applications
• Ultra-low resistance and narrow tolerance are suitable for
current detection
PS0306/PS0508/PS0612
PS1225
H
Marking Coating
T
erminal electrode
Protective coat
Resistor Layer
Ceramic substrate
12
34
R010
W
TopBottom
L
BB
A
A
L
C
D
W
a
55
Electrical characteristics
Type Technology Size Power
P70 Operating Temp.
range Max.
working voltage Tolerance Resistance range & T. C. R.
PS Metal Foil
4 termination
0306 1/8W -55°C to 155°C
(PxR)^1/2 ±1%, ±5%
10mΩ≤R≤50mΩ ±75ppm/°C
±100ppm/°C
1/4W
0508
1/8W
-55°C to 170°C1/4W
1/2W
0612 1W -55°C to 170°C 0.5mΩ,0.75mΩ
1mΩ≤R≤2mΩ
3mΩ≤R≤5mΩ
±700ppm/°C
±400ppm/°C
±150ppm/°C
1225 3W -55°C to 170°C 4mΩ≤R≤50mΩ ±75ppm/°C
±100ppm/°C
Note:Pleasecontactwithsalesoffices,distributorsandrepresentativesinyourregionbeforeordering
Environmental characteristics
Performance test Test method Procedure Requirements
Life MIL-STD-202G-
method 108A 1 000 hours at 70 ±5°C applied RCWV
1.5 hours on, 0.5 hours off, still air required ±(1%+0.0005Ω)
High temperature exposure MIL-STD-202G-
method 108A 1 000 hours at maximum operating temperature
dependingonspecification,unpowered ±(1%+0.0005Ω)
Moisture resistance MIL-STD-202G-
method 106F
Eachtemperature/humiditycycleisdefinedas
8hours(method106F),3cycles/24hours
for10dwith25°C/65°C95%R.H
±(0.5%+0.0005Ω)
Solderability
Wetting J-STD-002B testB Electricaltestnotrequired.Magnification50X
Lead-free solder bath at 245 ±3°C
Dipping time: 3 ±0.5 seconds
Well tinned
(≥95%covered)
Resistance to
soldering heat MIL-STD-202G-
method 210F Lead-free solder, 260°C, 10 seconds immersion time ±(0.5%+0.0005Ω)
No visible damage
Short time overload MIL-R-55342D-
para 4.7.5 5 times of rated power for 5 seconds at room temperature ±(0.5%+0.0005Ω)
No visible damage
Chip Resistors Selection Charts
PS - Current sensors - low T.C.R. chip resistors, 4 termination, 0306 to 1225
56
Global part number - Preferred type
Ordering example: PS0612FKF070R01L
P S 0 6 1 2 F K F 0 7 0 R 0 1 L
Series name (code 1-2) Default code(1/2) (code 17)
PS = current sensors - low T.C.R., 4 termination
Z=Defaultcode
Resistance (code 12-16)
0U5=0.0005Ω
Size code (code 3-6) 0R01=0.01Ω
(inch/metric) 0R02=0.02Ω
0306 = 0.8 x 1.6
0508 = 1.25 x 2.0 Taping reel (code 10-11)
0612 = 1.6 x 3.2 07 = 7 inch Dia. reel
1225 = 3.2 x 6.35 7W = 7 inch Dia. reel
2 x standard power type
Tolerance (code 7) 7T = 7 inch Dia. reel
F = ±1% 3 x standard power type
J = ±5%
T. C. R. (code 9)
Packing style (code 8 ) M=±75ppm/°C
R = Paper tape reel F=±100ppm/°C
K = Embossed plastic tape reel L=±150ppm/°C
P=±400ppm/°C
Q=±700ppm/°C
Note:1.AllofourRSMDproductsareRoHScompliant."LFP"oftheinternal2Dreellabelmentions"LeadFreeProcess"
2. PS series 4 termination typeproductsareavailableby"Globalpartnumber"only
Chip Resistors Selection Charts
PS - Current sensors - low T.C.R. chip resistors, 4 termination, 0306 to 1225
57
Derating curve Construction
Maximum dissipation (P) in percentage of
rated power as a function of the operating
ambient temperature (Tamb).
100
80
60
40
20
-55-40 -20020 40 60 80
70
100120 140 160
Ambient Temperature (
C)
Rated Power (%)
155
overcoat
protective glass
resistive layer
(jumper chip is a conductor)
inner electrode
termination (Ni / Au / Pd)
ceramic substrate
marking layer
Dimensions
W
unit: m
m
I2I2
I1
I1
L
H
Type L W H I1I2
AR0402 1.00 ±0.05 0.50 ±0.05 0.35 ±0.05 0.20 ±0.10 0.25 ±0.10
AR0603 1.60 ±0.10 0.80 ±0.10 0.45 ±0.10 0.25 ±0.15 0.25 ±0.15
AR0805 2.00 ±0.10 1.25 ±0.10 0.50 ±0.10 0.35 ±0.20 0.35 ±0.20
AR1206 3.10 ±0.10 1.60 ±0.10 0.55 ±0.10 0.45 ±0.20 0.40 ±0.20
Features
• New NiAu terminations provide special application for
hybrid board gluing
• Competitive with AgPd terminations
• Special use in high temperature environment
• Higher component and equipment reliability
Chip Resistors Selection Charts
AR - NiAu termination chip resistors, 0402 to 1206
58
Electrical characteristics
Type Power
P70
Operating Temp.
range MWV RCOV DWV Resistance range & tolerance T. C. R.
(ppm/°C)
Jumper criteria
(unit: A)
AR0402 1/16W -55°Cto+155°C 50V 100V 100V
E24 ±5%
E24/E96±1%
1Ω≤R≤10MΩ
1Ω≤R≤10MΩ 10Ω<R≤10MΩ
1Ω≤R≤10Ω
±100
±200
Rated current
Max. current 1.0
2.0
AR0603 1/10W -55°Cto+155°C 50V 100V 100V Rated current
Max. current 1.0
2.0
AR0805 1/8W -55°Cto+155°C 150V 300V 300V Jumper <50MΩ Rated current
Max. current 2.0
5.0
AR1206 1/4W -55°Cto+155°C 200V 500V 500V Rated current
Max. current 2.0
10.0
Environmental characteristics
Performance test Test method Procedure Requirements
Life MIL-STD-202G-
method 108A 1 000 hours at 70 ±5°C applied RCWV
1.5 hours on, 0.5 hours off, still air required ±(2%+0.05Ω)
<100mΩforjumper
High temperature exposure MIL-STD-202G-
method 108A 1 000 hours at maximum operating temperature
dependingonspecification,unpowered
±(1%+0.05Ω)
<50mΩforjumper
Moisture resistance MIL-STD-202G-
method 106F
Eachtemperature/humiditycycleisdefinedas8hours
(method106F),3cycles/24hoursfor10dwith
25°C/65°C95%R.H
±(2%+0.05Ω)
<100mΩforjumper
Thermal shock MIL-STD-202G-
method 107G LCT/UCT,numberofcyclesrequiredis300
Maximum transfer time is 20 seconds
±(0.5%+0.05Ω)for
10K to 10M
±(1%+0.05Ω)forothers
<50mΩforjumper
Solderability
Wetting J-STD-002B
testB
Electricaltestnotrequired.Magnification50X
Lead-free solder bath at 245 ±3°C
Dipping time: 3 ±0.5 seconds
Welltinned(≥95%covered)
No visible damage
Resistance to
soldering heat MIL-STD-202G-
method 210F Lead-free solder, 260°C, 10 seconds immersion time ±(1%+0.05Ω)
<50mΩforjumper
No visible damage
Short time overload MIL-R-55342D-
para 4.7.5 2.5 times RCWV or maximum overload voltage which-
ever is less for 5 seconds at room temperature
±(2%+0.05Ω)
<50mΩforjumper
No visible damage
Chip Resistors Selection Charts
AR - NiAu termination chip resistors, 0402 to 1206
59
Globalpartnumber-PreferredtypefororderingYageo/Phycompbrandedproducts
Ordering example: AR0603JR-07100KL
A R 0 6 0 3 J R 0 7 1 0 0 K L
Series name (code 1-2) Default code(1/2) (code 17)
AR = NiAu termination
Resistance (code 12-16)
Size code (code 3-6) 0R = Jumper
(inch/metric) 10R =10Ω
0402 = 1.0 x 0.5 100R=100Ω
0603 = 1.6 x 0.8 100K=100KΩ
0805 = 2.0 x 1.25
1206 = 3.2 x 1.6 Taping reel (code 10-11)
07 = 7 inch Dia. reel
Tolerance (code 7)
F = ±1% T. C. R. (code 9)
J = ±5% (for Jumper ordering) “―”=Basedonspec.
(―forthickfilmonly)
Packing style (code 8 )
R = Paper tape reel
Note:1.AllofourRSMDproductsareRoHScompliant."LFP"oftheinternal2Dreellabelmentions"LeadFreeProcess"
2. Letter L is system default code for ordering only
Phycomp worldwide - Traditional type
ChipresistorswithNi/Auterminations
Size: inch (mm) 0402 (1005) 0603 (1608) 0805 (2012) 1206 (3216)
Power 1/16W 1/10W 1/8W 1/4W
Tolerance +5% +1% +5% +1% +5% +1% +5% +1%
Resistance E24 E24/E96 E24 E24/E96 E24 E24/E96 E24 E24/E96
Packing paper tape paper tape paper tape paper tape
Quantity 5 000 --- --- 2322 702 11…L 2322 704 1.…L 2322 730 11… 2322 734 1.…L 2322 711 11...L 2322 729 1.…L
10 000 2322 705 12…L 2322 706 2…. --- --- --- --- --- ---
Jumper 5 000 --- --- 2322 702 19001L --- 2322 730 19001L --- 2322 711 19001L ---
10 000 2322 705 19001 L --- --- --- --- --- --- ---
For ordering rules: Seepage14forE24/E96valuesandthelast4or3digitsofthe12NCcataloguenumber
Phycomp CTC ordering code - Traditional type - North America
Regional code for ordering Phycomp branded products. Please see page 13 for details.
Chip Resistors Selection Charts
AR - NiAu termination chip resistors, 0402 to 1206
60
Derating curve Construction
Maximum dissipation (P) in percentage of
rated power as a function of the operating
ambient temperature (Tamb).
100
80
60
40
20
-55-40 -20020 40 60 80
70
100120 140 160
Ambient Temperature (
C)
Rated Power (%)
155
Dimensions
W
unit: m
m
I2I2
I1
I1
L
H
Type L W H I1I2
SR0402 1.00±0.05 0.50±0.05 0.35±0.05 0.20±0.10 0.25±0.10
SR0603 1.60±0.10 0.80±0.10 0.45±0.10 0.25±0.15 0.25±0.15
SR0805 2.00 ±0.10 1.25 ±0.10 0.50 ±0.10 0.35 ±0.20 0.35 ±0.20
SR1206 3.10 ±0.10 1.60 ±0.10 0.55 ±0.10 0.45 ±0.20 0.40 ±0.20
SR1218 3.10 ±0.10 4.60 ±0.10 0.55 ±0.10 0.45 ±0.20 0.40 ±0.20
SR2010 5.00 ±0.10 2.50 ±0.15 0.55 ±0.10 0.55 ±0.15 0.50 ±0.20
SR2512 6.35 ±0.10 3.10 ±0.15 0.55 ±0.10 0.60 ±0.20 0.50 ±0.20
overcoat
protective glass
resistive layer
inner electrode
termination (Ni / matte tin)
ceramic substrate
inner electrode
marking layer
Features
• Reducedsizeoffinalequipment
• Low assembly costs
• Higher component and equipment reliability
• Excellent performance at pulse loading
Chip Resistors Selection Charts
SR - Surge chip resistors, 0402 to 2512
61
Electrical characteristics
Type Power
P70
Operating Temp.
range MWV RCOV DWV Resistance range & tolerance T. C. R.
SR0402 1/16W -55°Cto+155°C 50V 100V 100V
E24 ±5%, ±10%, ±20% 1Ω≤R≤100KΩ ±200ppm/°C
1/8W -55°Cto+155°C 50V 100V 100V
SR0603 1/10W -55°Cto+155°C 50V 100V 100V
1/5W -55°Cto+155°C 50V 100V 100V
SR0805 1/8W -55°Cto+155°C 150V 300V 300V
1/4W -55°Cto+155°C 150V 300V 300V
SR1206 1/4W -55°Cto+155°C 200V 400V 500V
1/2W -55°Cto+155°C 200V 400V 500V
SR1218 1W -55°Cto+155°C 200V 400V 500V
SR2010 3/4W -55°Cto+155°C 200V 400V 500V
SR2512 1W -55°Cto+155°C 200V 400V 500V
Environmental characteristics
Performance test Test method Procedure Requirements
Life MIL-STD-202G-
method 108A 1 000 hours at 70 ±5°C applied RCWV
1.5 hours on, 0.5 hours off, still air required ±(3%+0.05Ω)
High temperature exposure MIL-STD-202G-
method 108A 1 000 hours at maximum operating temperature
dependingonspecification,unpowered ±(3%+0.05Ω)
Solder-
ability
Wetting J-STD-002B
testB
Electricaltestnotrequired.Magnification50X
Lead-free solder bath at 245 ±3°C
Dipping time: 3 ±0.5 seconds
Welltinned(≥95%covered)
No visible damage
Resistance to
soldering heat MIL-STD-202G-
method 210F Lead-free solder, 260°C, 10 seconds immersion time ±(1%+0.05Ω)
No visible damage
Short time overload MIL-R-55342D-
para 4.7.5 2.5 times RCWV or maximum overload voltage which-
ever is less for 5 seconds at room temperature ±(2%+0.05Ω)
No visible damage
Pulse-Load behavior
103
10
4
1
102
1101
101
10 210
3
10 -2 10 -1
10 -1
One-Pulse limiting electric power (W)
Pulse duration (ms)
0805
0603
0402
1206
1218
1210
2010
2512
Chip Resistors Selection Charts
SR - Surge chip resistors, 0402 to 2512
62
Globalpartnumber-PreferredtypefororderingYageo/Phycompbrandedproducts
Ordering example: SR0805MR-07100KL
S R 0 8 0 5 M R 0 7 1 0 0 K L
Series name (code 1-2) Default code(1/2) (code 17)
SR = Surge
Resistance (code 12-16)
Size code (code 3-6) 10R =10Ω
(inch/metric) 100K=100KΩ
0402 = 1.0 x 0.5
0603 = 1.6 x 0.8 Taping reel (code 10-11)
0805 = 2.0 x 1.25 7W = 7 inch Dia. reel
1206 = 3.2 x 1.6 2 x standard power type
1218 = 3.2 x 4.5 07 = 7 inch Dia. reel
2010 = 5.0 x 2.5 10 = 10 inch Dia. reel
2512 = 6.35 x 3.2 13 = 13 inch Dia. reel
Tolerance (code 7) T. C. R. (code 9)
J = ±5% “―”=Basedonspec.
K = ±10% (―forthickfilmonly)
M = ±20%
Packing style (code 8 )
R = Paper tape reel
K = Embossed plastic tape reel
Note:1.AllofourRSMDproductsareRoHScompliant."LFP"oftheinternal2Dreellabelmentions"LeadFreeProcess"
2. Letter L is system default code for ordering only
Phycomp worldwide - Traditional type
Surge chip resistors
Size: inch (mm) 0805 (2012) 1206 (3216) 1218 (3248) 2512 (6432)
Power 1/8W 1/4W 1 W 1 W
Tolerance +10% +5% +10% +5% +10% +20%
Resistance E24 E24 E24 E24 E24 E24
Packing paper tape paper tape paper tape paper tape paper tape paper tape
Quantity 4 000 --- --- 2350 557 10…L 2350 556 11…L 2350 556 10…L 2350 556 13…L
5 000 2350 554 12…L 2350 550 10…L --- --- --- ---
For ordering rules: Seepage14forE24/E96valuesandthelast4or3digitsofthe12NCcataloguenumber
Phycomp CTC ordering code - Traditional type - North America
Regional code for ordering Phycomp branded products. Please see page 15 for details.
Chip Resistors Selection Charts
SR - Surge chip resistors, 0402 to 2512
63
Derating curve Construction
Maximum dissipation (P) in percentage of
rated power as a function of the operating
ambient temperature (Tamb).
100
80
60
40
20
-55-40 -20020 40 60 80
70
100120 140 160
Ambient Temperature (
C)
Rated Power (%)
155
Dimensions
W
unit: m
m
I2I2
I1
I1
L
H
Type L W H I1I2
RV0603 1.60 ±0.10 0.80 ±0.10 0.45 ±0.10 0.25 ±0.15 0.25 ±0.15
RV0805 2.00 ±0.10 1.25 ±0.10 0.50 ±0.10 0.35 ±0.20 0.35 ±0.20
RV1206 3.10 ±0.10 1.60 ±0.10 0.55 ±0.10 0.40 ±0.20 0.45 ±0.20
RV2512 6.35 ±0.10 3.10 ±0.15 0.55 ±0.10 0.60 ±0.20 0.50 ±0.20
overcoat
protective glass
resistive layer
inner electrode
termination (Ni / matte tin)
ceramic substrate
inner electrode
marking layer
Features
• Higher maximum working voltage compared to RC series
• Extremely thin and light
• Reliable electrode construction
• Compatible with lead containing and lead-free soldering
processes
• Highly stable in auto-placement surface mounting
Chip Resistors Selection Charts
RV - High voltage chip resistors, 0603 to 2512
64
Electrical characteristics
Type Power
P70
Operating Temp.
range MWV RCOV DWV Resistance range & tolerance T. C. R.
RV0603 1/10W -55°Cto+155°C 350V 500V 500V E24 ±5%
E24/E96±1% 10KΩ≤R≤1MΩ
±200ppm/°C
RV0805 1/8W -55°Cto+155°C 400V 800V 800V E24 ±5%
E24/E96±1% 100KΩ≤R≤10MΩ
RV1206 1/4W -55°Cto+155°C 500V 1000V 1000V E24 ±5%
E24/E96±1%
100KΩ≤R≤27MΩ
100KΩ≤R≤10MΩ
RV2512 1W -55°Cto+155°C 500V 1000V 1000V E24 ±5% 4.7MΩ≤R≤16MΩ
Environmental characteristics
Performance test Test method Procedure Requirements
Life MIL-STD-202G-
method 108A 1 000 hours at 70 ±5°C applied RCWV
1.5 hours on, 0.5 hours off, still air required ±(2%+0.05Ω)
High temperature exposure MIL-STD-202G-
method 108A 1 000 hours at maximum operating temperature
dependingonspecification,unpowered ±(1%+0.05Ω)
Moisture resistance MIL-STD-202G-
method 106F
Eachtemperature/humiditycycleisdefinedas
8hours(method106F),3cycles/24hours
for10dwith25°C/65°C95%R.H
±(2%+0.05Ω)
Thermal shock MIL-STD-202G-
method 107G LCT/UCT,numberofcyclesrequiredis300
Maximum transfer time is 20 seconds ±(0.5%+0.05Ω)for10Kto10M
±(1%+0.05Ω)forothers
Solderability
Wetting J-STD-002B
testB
Electricaltestnotrequired.Magnification50X
Lead-free solder bath at 245 ±3°C
Dipping time: 3 ±0.5 seconds
Welltinned(≥95%covered)
No visible damage
Resistance to
soldering heat MIL-STD-202G-
method 210F Lead-free solder, 260°C, 10 sec-
onds immersion time ±(1%+0.05Ω)
No visible damage
Short time overload MIL-R-55342D-
para 4.7.5 2.5 times RCWV or maximum overload voltage which-
ever is less for 5 seconds at room temperature ±(2%+0.05Ω)
No visible damage
Chip Resistors Selection Charts
RV - High voltage chip resistors, 0603 to 2512
65
Globalpartnumber-PreferredtypefororderingYageo/Phycompbrandedproducts
Ordering example: RV0805JR-07100KL
R V 0 8 0 5 J R 0 7 1 0 0 K L
Series name (code 1-2) Default code(1/2) (code 17)
RV = High voltage
Resistance (code 12-16)
Size code (code 3-6) 100K=100KΩ
(inch/metric) 1M =1MΩ
0603 = 1.6 x 0.8
0805 = 2.0 x 1.25
1206 = 3.2 x 1.6 Taping reel (code 10-11)
2512 = 6.35 x 3.2 07 = 7 inch Dia. reel
Tolerance (code 7) T. C. R. (code 9)
F = ±1% “―”=Basedonspec.
J = ±5% (―forthickfilmonly)
Packing style (code 8 )
R = Paper tape reel
K = Embossed plastic tape reel
Note:1.AllofourRSMDproductsareRoHScompliant."LFP"oftheinternal2Dreellabelmentions"LeadFreeProcess"
2. Letter L is system default code for ordering only
Phycomp worldwide - Traditional type
High voltage chip resistors
Size: inch (mm) 0805 (2012) 1206 (3216) 2512 (6432)
Power 1/8W 1/4W 1 W
Tolerance +5% +1% +5% +1% +5%
Resistance E24 E24/E96 E24 E24/E96 E24
Packing paper tape paper tape blister tape
Quantity 4 000 --- --- --- --- 2322 762 98...L
5 000 2322 792 61...L 2322 793 6....L 2322 790 61...L 2322 791 6....L ---
For ordering rules: Seepage14forE24/E96valuesandthelast4or3digitsofthe12NCcataloguenumber
Phycomp CTC ordering code - Traditional type - North America
Regional code for ordering Phycomp branded products. Please see page 15 for details.
Chip Resistors Selection Charts
RV - High voltage chip resistors, 0603 to 2512
66
Derating curve Construction
Maximum dissipation (P) in percentage of
rated power as a function of the operating
ambient temperature (Tamb).
100
80
60
40
20
-55-40 -20020 40 60 80
70
100120 140 160
Ambient Temperature (
C)
Rated Power (%)
155
TR0805-
TR1206
125
TR0402-
TR0603
overcoat
resistive layer
inner electrode
termination
ceramic substrate
Dimensions
W
unit: m
m
I2I2
I1
I1
L
H
Type L W H I1I2
TR0402 1.00 ±0.10 0.50 ±0.05 0.35 ±0.05 0.20 ±0.10 0.25 ±0.10
TR0603 1.60 ±0.10 0.80 ±0.10 0.45 ±0.10 0.25 ±0.15 0.25 ±0.15
TR0805 2.00 ±0.10 1.25 ±0.10 0.50 ±0.10 0.35 ±0.20 0.35 ±0.20
TR1206 3.10 ±0.10 1.60 ±0.10 0.55 ±0.10 0.45 ±0.20 0.40 ±0.20
Features
• Reducedsizeoffinalequipment
• Low assembly costs
• Higher component and equipment reliability
• Improved performance at high frequency
• Low noise, when not trimmed
Chip Resistors Selection Charts
TR - Trimmable chip resistors, 0402 to 1206
67
Electrical characteristics
Type Power
P70
Operating Temp.
range MWV RCOV DWV Resistance range & tolerance T. C. R.
(ppm/°C)
TR0402 1/16W -55°Cto+125°C 50V 100V 100V
E24+0/-10%,+0/-20%,+0/-30% 1Ω≤R≤10MΩ
1Ω≤R≤10Ω
10Ω<R≤1MΩ
1MΩ<R≤10MΩ
±200
±100
±200
TR0603 1/16W -55°Cto+125°C 50V 100V 100V
TR0805 1/8W -55°Cto+155°C 150V 300V 500V
TR1206 1/4W -55°Cto+155°C 200V 500V 500V
Environmental characteristics
Performance test Test method Procedure Requirements
Life MIL-STD-202G-
method 108A 1 000 hours at 70 ±5°C applied RCWV
1.5 hours on, 0.5 hours off, still air required ±(1%+0.05Ω)
High temperature exposure MIL-STD-202G-
method 108A 1 000 hours at maximum operating temperature
dependingonspecification,unpowered ±(1%+0.05Ω)
Moisture resistance MIL-STD-202G-
method 106F
Eachtemperature/humiditycycleisdefinedas
8hours(method106F),3cycles/24hours
for10dwith25°C/65°C95%R.H
±(2%+0.05Ω)
Thermal shock MIL-STD-202G-
method 107G LCT/UCT,numberofcyclesrequiredis300
Maximum transfer time is 20 seconds ±(1%+0.05Ω)
Solder-
ability
Wetting J-STD-002B
testB
Electricaltestnotrequired.Magnification50X
Lead-free solder bath at 245 ±3°C
Dipping time: 3 ±0.5 seconds
Welltinned(≥95%covered)
No visible damage
Resistance to
soldering heat MIL-STD-202G-
method 210F Lead-free solder, 260°C, 10 seconds immersion time ±(1%+0.05Ω)
No visible damage
Short time overload MIL-R-55342D-
para 4.7.5 2.5 times RCWV or maximum overload voltage
whichever is less for 5 seconds at room temperature ±(1%+0.05Ω)
No visible damage
Chip Resistors Selection Charts
TR - Trimmable chip resistors, 0402 to 1206
68
Globalpartnumber-PreferredtypefororderingYageo/Phycompbrandedproducts
Ordering example: TR0603MR-07100KL
T R 0 6 0 3 M R 0 7 1 0 0 K L
Series name (code 1-2) Default code(1/2) (code 17)
TR = Trimmable
Resistance (code 12-16)
Size code (code 3-6) 10R =10Ω
(inch/metric) 100R=100Ω
0402 = 1.0 x 0.5 100K=100KΩ
0603 = 1.6 x 0.8
0805 = 2.0 x 1.25 Taping reel (code 10-11)
1206 = 3.2 x 1.6 07 = 7 inch Dia. reel
Tolerance (code 7) T. C. R. (code 9)
K=0/-10% “―”=Basedonspec.
M=0/-20% (―forthickfilmonly)
N =0/-30%
Packing style (code 8 )
R = Paper tape reel
Note:1.AllofourRSMDproductsareRoHScompliant."LFP"oftheinternal2Dreellabelmentions"LeadFreeProcess"
2. Letter L is system default code for ordering only
Phycomp worldwide - Traditional type
Trimmable chip resistors
Size: inch (mm) 0402 (1005) 0603 (1608) 0805 (2012) 1206 (3216)
Power 1/16W 1/10W 1/8W 1/4W
Tolerance E24 E24 E24 E24
Resistance paper tape paper tape paper tape paper tape
Packing 2350 503 21…L 2350 502 11…L 2350 501 11…L 2350 500 11…L
Quantity 50000/-20%
2350 503 20…L 2350 502 10…L 2350 511 10…L 2350 500 10…L
50000/-30%
on request on request on request 2322 724 94…L
Europe 5 000
2322 792 61...L 2322 793 6....L 2322 791 6....L ---
For ordering rules: Seepage14forE24/E96valuesandthelast4or3digitsofthe12NCcataloguenumber
Phycomp CTC ordering code - Traditional type - North America
Regional code for ordering Phycomp branded products. Please see page 15 for details.
Chip Resistors Selection Charts
TR - Trimmable chip resistors, 0402 to 1206
69
Derating curve Construction
Maximum dissipation (P) in percentage of
rated power as a function of the operating
ambient temperature (Tamb).
100
80
60
40
20
-55-40 -20020 40 60 80
70
100120 140 160
Ambient Temperature (
C)
Rated Power (%)
155
Dimensions
W
unit: m
m
I2I2
I1
I1
L
H
Type L W H l1l2
AF0201 0.60±0.03 0.30±0.03 0.23 ±0.03 0.10±0.05 0.15±0.05
AF0402 1.00 ±0.05 0.50 ±0.05 0.32 ±0.05 0.20 ±0.10 0.25 ±0.10
AF0603 1.60 ±0.10 0.80 ±0.10 0.45 ±0.10 0.25 ±0.15 0.25 ±0.15
AF0805 2.00 ±0.10 1.25 ±0.10 0.50 ±0.10 0.35 ±0.20 0.35 ±0.20
AF1206 3.10 ±0.10 1.60 ±0.10 0.55 ±0.10 0.45 ±0.20 0.40 ±0.20
AF1210 3.10±0.10 2.60±0.15 0.50 ±0.10 0.45±0.15 0.50±0.20
AF1218 3.10±0.10 4.60±0.10 0.55 ±0.10 0.45±0.20 0.40±0.20
AF2010 5.00±0.10 2.50±0.15 0.55±0.10 0.55±0.15 0.50±0.20
AF2512 6.35±0.10 3.10±0.15 0.55±0.10 0.60±0.20 0.50±0.20
overcoat
protective glass
resistive layer
inner electrode
termination (Ni / matte tin)
ceramic substrate
inner electrode
marking layer
Features
• Superior resistance against sulfur containing atmosphere
• Hightly reliable multilayer electrode construction
• Compatible with all soldering processes
• Highly stable in auto-placement surface mounting applications
• Barrier layer end termination
• Halogen free product and production
Chip Resistors Selection Charts
AF - Sulfur resistant chip resistors, 0201 to 2512
70
Electrical characteristics
Type Power
P70
Operating Temp.
range MWV RCOV DWV Resistance range & tolerance T. C. R.
(ppm/°C)
Jumper criteria
(unit: A)
AF0201 1/20W -55°Cto+125°C 25V 50V 50V E24 ±5%
E24/E96±1%
Jumper
R 10MΩ
R 10MΩ
< 50mΩ
1Ω≤R≤10Ω
10Ω<R≤10MΩ
-100/+350
±200 Rated current
Max. current 0.5
1.0
AF0402 1/16W -55°Cto+155°C 50V 100V 100V
E24 ±5%
E24/E96±1%
Jumper
1Ω≤R≤22MΩ
1Ω≤R≤10MΩ
<50mΩ
1Ω≤R≤10Ω
10Ω<R≤10MΩ
10MΩ<R≤22MΩ
±200
±100
±200
Rated current
Max. current 1.0
2.0
AF0603 1/10W -55°Cto+155°C 50V 100V 100V Rated current
Max. current 1.0
2.0
AF0805 1/8W -55°Cto+155°C 150V 300V 300V Rated current
Max. current 2.0
5.0
AF1206 1/4W -55°Cto+155°C 200V 400V 500V Rated current
Max. current 2.0
10.0
AF1210 1/2W -55°Cto+155°C 200V 500V 500V
E24 ±5%
E24/E96±1%
Jumper
R 10MΩ
R 10MΩ
< 50mΩ
R 10Ω
10Ω < R 10MΩ
±200
±100
Rated current
Max. current 2.0
10.0
AF1218 1W -55°Cto+155°C 200V 500V 500V Rated current
Max. current 2.0
10.0
AF2010 3/4W -55°Cto+155°C 200V 500V 500V Rated current
Max. current 2.0
10.0
AF2512 1W -55°Cto+155°C 200V 500V 500V Rated current
Max. current 2.0
10.0
Environmental characteristics
Performance test Test method Procedure Requirements
Life MIL-STD-202G-
method 108A 1 000 hours at 70 ±5°C applied RCWV
1.5 hours on, 0.5 hours off, still air required ±(1%+0.05Ω)
<100mΩforjumper
High temperature exposure MIL-STD-202G-
method 108A 1 000 hours at maximum operating temperature
dependingonspecification,unpowered
±(1%+0.05Ω)
<100mΩforjumper
Moisture resistance MIL-STD-202G-
method 106F
Eachtemperature/humiditycycleisdefinedas
8hours(method106F),3cycles/24hours
for10dwith25°C/65°C95%R.H
±(0.5%+0.05Ω)for1%tol.
±(1%+0.05Ω)for5%tol.
<100mΩforjumper
Thermal shock MIL-STD-202G-
method 107G LCT/UCT,numberofcyclesrequiredis300
Maximum transfer time is 20 seconds
±(0.5%+0.05Ω)for1%tol.
±(1%+0.05Ω)for5%tol.
<100mΩforjumper
Solderability
Wetting J-STD-002B testB Electricaltestnotrequired.Magnification50X
Lead-free solder bath at 245 ±3°C
Dipping time: 3 ±0.5 seconds
Well tinned
(≥95%covered)
No visible damage
Resistance to
soldering heat MIL-STD-202G-
method 210F Lead-free solder, 260°C, 10 seconds immersion time ±(1%+0.05Ω)
No visible damage
Short time overload MIL-R-55342D-
para 4.7.5 2.5 times RCWV or maximum overload voltage which-
ever is less for 5 seconds at room temperature ±(1%+0.05Ω)
No visible damage
Anti-FOS ASTM-B-809-95 Sulfur (saturated vapor) 1000 hours, 60±2°C, 91~93
%RH, Rating with no power ±(1%+0.05Ω)
Chip Resistors Selection Charts
AF - Sulfur resistant chip resistors, 0201 to 2512
71
Chip Resistors Selection Charts
AF - Sulfur resistant chip resistors, 0201 to 2512
Global part number - Preferred type
Ordering example: AF0603JR-07100KL
A F 0 6 0 3 J R 0 7 1 0 0 K L
Series name (code 1-2) Default code(1/2) (code 17)
AF = Anti-sulfurated
Resistance (code 12-16)
Size code (code 3-6) 0R = Jumper
(inch/metric) 10R=10Ω
0201 = 0.6 x 0.3 100R=100Ω
0402 = 1.0 x 0.5 100K =100KΩ
0603 = 1.6 x 0.8
0805 = 2.0 x 1.25 Taping reel (code 10-11)
1206 = 3.2 x 1.6 07 = 7 inch Dia. reel
1210 = 3.2 x 1.6 10 = 10 inch Dia. reel
1218 = 3.2 x 2.6 13 = 13 inch Dia. reel
2010 = 5.0 x 2.5
2512 = 6.35 x 3.2 T. C. R. (code 9)
“―”=Basedonspec.
Tolerance (code 7) (―forthickfilmonly)
F = ±1%
J = ±5% (for Jumper ordering)
Packing style (code 8 )
R = Paper tape reel
K = Embossed plastic tape reel
Note:1.AllourRSMDproductsmeetRoHSCompliant."LFP"oftheinternal2Dreellabelmentions"LeadFreeProcess"
2. Letter L is system default code for order only
 3.AFseriesproductsareavailableby"Globalpartnumber"only
72
Chip Resistors Selection Charts
AF - Sulfur resistant chip resistors, Arrays
Schematics
Dimensions
Type H/H1 B P L T W1 W2
AF122 0.30+0.10/-0.05 0.24 ± 0.10 0.67 ± 0.05 1.00 ± 0.10 0.30 ±0.10 0.25 ± 0.10 1.00 ± 0.10
AF124 H : 0.45 ± 0.05
H1 : 0.30 ± 0.05 0.20 ± 0.15 0.50 ± 0.05 2.00 ± 0.10 0.45 ± 0.10 0.30 ± 0.15 1.00 ± 0.10
Features
• Superior resistance against sulfur containing atmosphere
• Highly reliable multilayer electrode construction
• Compatible with all soldering processes
• Highly stable in auto-placement surface mounting applications
• Barrier layer end termination
• Halogen free product and production
Side view for all types
T
W1
W2
H
B
P
L
H
L
B
H1
a
a
P
AF122 AF124
73
Chip Resistors Selection Charts
AF - Sulfur resistant chip resistors, Arrays
Electrical characteristics
Type Power
rating Operating Temp.
range MWV RCOV DWV Resistance range & tolerance T. C. R. Jumper criteria
(unit: A)
AF122 1/16W -55°Cto+125°C 50V 100V 100V E24 ±5%
E24/E96±1%
Jumper
1Ω≤R≤1MΩ
1Ω≤R≤1MΩ
<50mΩ
1Ω≤R<10Ω
10Ω<R<1MΩ
±250ppm/°C
±200ppm/°C
Rated current
Max. current 0.5A
1.0A
AF124 1/16W -55°Cto+155°C 25V 50V 100V Rated current
Max. current 1.0A
2.0A
Environmental characteristics
Performance test Test method Procedure Requirements
Life MIL-STD-202G-
method 108A 1 000 hours at 70 ±5°C applied RCWV
1.5 hours on, 0.5 hours off, still air required ±(2%+0.05Ω)
<100mΩforjumper
High temperature exposure MIL-STD-202G-
method 108A 1 000 hours at maximum operating temperature
dependingonspecification,unpowered
±(1%+0.05Ω)
<50mΩforjumper
Moisture resistance MIL-STD-202G-
method 106F
Eachtemperature/humiditycycleisdefinedas
8hours(method106F),3cycles/24hours
for10dwith25°C/65°C95%R.H
±(2%+0.05Ω)
<50mΩforjumper
Thermal shock MIL-STD-202G-
method 107G LCT/UCT,numberofcyclesrequiredis300
Maximum transfer time is 20 seconds
±(0.5%+0.05Ω)for10Kto10M
±(1%+0.05Ω)forothers
<50mΩforjumper
Solderability
Wetting J-STD-002B testB Electricaltestnotrequired.Magnification50X
Lead-free solder bath at 245 ±3°C
Dipping time: 3 ±0.5 seconds Welltinned(≥95%covered)
Resistance to
soldering heat MIL-STD-202G-
method 210F Lead-free solder, 260°C, 10 seconds immersion time ±(1%+0.05Ω)
<50mΩforjumper
No visible damage
Short time overload MIL-R-55342D-
para 4.7.5 2.5 times RCWV or maximum overload voltage which-
ever is less for 5 seconds at room temperature
±(2%+0.05Ω)
<50mΩforjumper
No visible damage
Anti-FOS ASTM-B-809-95 Sulfur (saturated vapor) 1000 hours, 60±2°C, 91~93
%RH, Rating with no power ±(1%+0.05Ω)
74
Global part number - Array
Ordering example: AF122-JR-07100KL
A F 12 2 J R 0 7 1 0 0 K L
Series name (code 1-2) Default code (code 17)
AF = Array (convex)thickfilm
Resistance (code 12-16)
Size code (inch) (code 3-4) 0R = Jumper
10R=10Ω
12 = 0402 x 2 (0404) 100R=100Ω
0402 x 4 (0408) 100K =100KΩ
Taping reel (code 10-11)
07 = 7 inch Dia. reel
Number of resistor (code 5) 10 = 10 inch Dia. reel
2 = 2 resistors 13 = 13 inch Dia. reel
4 = 4 resistors
T. C. R. (code 9)
Schematic (code 6) “―”=Basedonspec.
"─"=Basedonspec.
Packing style (code 8)
R = Paper tape reel
Tolerance (code 7)
F = ± 1%
J=±5%(forjumperordering)
Note:1.AllourRSMDproductsmeetRoHSCompliant."LFP"oftheinternal2Dreellabelmentions"LeadFreeProcess"
2. Letter L is system default code for order only
Chip Resistors Selection Charts
AF - Sulfur resistant chip resistors, Arrays
75
Derating curve Construction
Maximum dissipation (P) in percentage of
rated power as a function of the operating
ambient temperature (Tamb).
100
80
60
40
20
-55-40 -20020 40 60 80
70
100120 140 160
Ambient Temperature (
C)
Rated Power (%)
155
Dimensions
W
unit: m
m
I2I2
I1
I1
L
H
Type L W H l1l2
AC0402 1.00 ±0.05 0.50 ±0.05 0.32 ±0.05 0.20 ±0.10 0.25 ±0.10
AC0603 1.60 ±0.10 0.80 ±0.10 0.45 ±0.10 0.25 ±0.15 0.25 ±0.15
AC0805 2.00 ±0.10 1.25 ±0.10 0.50 ±0.10 0.35 ±0.20 0.35 ±0.20
AC1206 3.10 ±0.10 1.60 ±0.10 0.55 ±0.10 0.45 ±0.20 0.40 ±0.20
AC1210 3.10 ±0.10 2.60 ±0.15 0.50 ±0.10 0.45 ±0.15 0.50 ±0.20
AC1218 3.10 ±0.10 4.60 ±0.10 0.55 ±0.10 0.45 ±0.20 0.40 ±0.20
AC2010 5.00 ±0.10 2.50 ±0.15 0.55 ±0.10 0.55 ±0.15 0.50 ±0.20
AC2512 6.35 ±0.10 3.10 ±0.15 0.55 ±0.10 0.60 ±0.20 0.50 ±0.20
Chip Resistors Selection Charts
AC - Automotive grade chip resistors, 0402 to 2512
Features
• AEC-Q200qualified
• Production part approval process (PPAP) support
• High reliability
• High quality level
overcoat
protective glass
resistive layer
inner electrode
termination (Ni / matte tin)
ceramic substrate
inner electrode
marking layer
76
Chip Resistors Selection Charts
AC - Automotive grade chip resistors, 0402 to 2512
Electrical characteristics
Type Power
P70
Operating
Temp.
range MWV RCOV DWV Resistance range & tolerance T. C. R.
(ppm/°C)
Jumper criteria
(unit: A)
AC0402 1/16W -55°Cto+155°C 50V 100V 100V
E24 ±5%
E24/E96±0.5%,±1%
Jumper
1Ω≤R≤10MΩ
1Ω≤R≤10MΩ
<0.05Ω
1Ω≤R≤10Ω
10Ω<R≤10MΩ
±200
±100
Rated current
Max. current 1.0
2.0
AC0603 1/10W -55°Cto+155°C 50V 100V 100V Rated current
Max. current 1.0
2.0
AC0805 1/8W -55°Cto+155°C 150V 300V 300V Rated current
Max. current 2.0
5.0
AC1206 1/4W -55°Cto+155°C 200V 400V 500V Rated current
Max. current 2.0
10.0
AC1210 1/2W -55°Cto+155°C 200V 500V 500V Rated current
Max. current 2.0
10.0
AC1218 1W -55°Cto+155°C 200V 500V 500V Rated current
Max. current 6.0
10.0
AC2010 3/4W -55°Cto+155°C 200V 500V 500V Rated current
Max. current 2.0
10.0
AC2512 1W -55°Cto+155°C 200V 500V 500V Rated current
Max. current 2.0
10.0
Environmental characteristics
Performance test Test method Procedure Requirements
Life AEC-Q200-REV C-Test 8
MIL-STD-202 Method 108 1 000 hours at 125°C applied RCWV
1.5 hours on, 0.5 hours off ±(1%+0.05Ω)
<100mΩforjumper
High temperature exposure AEC-Q200-REV C-Test 3
MIL-STD-202 Method 108 1 000 hours at maximum operating temperature
dependingonspecification
±(1%+0.05Ω)
<50mΩforjumper
Moisture resistance AEC-Q200-REV C-Test 6
MIL-STD-202 Method 106
Eachtemperature/humiditycycleisdefinedas
8hours(method106F),3cycles/24hours
for10dwith25°C/65°C95%R.H.
±(0.5%+0.05Ω)for1%tol.
±(2%+0.05Ω)for5%tol.
<100mΩforjumper
Biased humidity AEC-Q200-REV C-Test 7
MIL-STD-202 Method 103
1000hours;+85°C85%R.H.;10%ofoperating
power
Measured at 24 ±2 hours after test
±(1%+0.05Ω)
<100mΩforjumper
Thermal shock AEC-Q200-REV C-Test 16
MIL-STD-202 Method 107 LCT/UCT,numberofcyclesrequiredis300
Maximum transfer time is 20 seconds ±(1%+0.05Ω)
<50mΩforjumper
Solderability
Wetting AEC-Q200-REV C-Test 18
J-STD-002B testB
Electricaltestnotrequired.Magnification50X
Lead-free solder bath at 245 ±3°C
Dipping time: 3 ±0.5 seconds
Well tinned
(≥95%covered)
No visible damage
Resistance to
soldering heat AEC-Q200-REV C-Test 15
MIL-STD-202 Method 215 Lead-free solder, 260°C, 10 seconds immersion time ±(1%+0.05Ω)
<50mΩforjumper
No visible damage
Short time overload MIL-R-55342D-
para 4.7.5 2.5 times RCWV or maximum overload voltage
whichever is less for 5 seconds at room temperature
±(1%+0.05Ω)
<100mΩforjumper
No visible damage
77
Chip Resistors Selection Charts
AC - Automotive grade chip resistors, 0402 to 2512
Global part number - Preferred type
Ordering example: AC0603JR-07100KL
A C 0 6 0 3 J R 0 7 1 0 0 K L
Series name (code 1-2) Default code(1/2) (code 17)
AC = Automotive grade
Resistance (code 12-16)
Size code (code 3-6) 0R = Jumper
(inch/metric) 10R=10Ω
0402 = 1.0 x 0.5 100R=100Ω
0603 = 1.6 x 0.8 100K =100KΩ
0805 = 2.0 x 1.25
1206 = 3.2 x 1.6 Taping reel (code 10-11)
1210 = 3.2 x 2.6 07 = 7 inch Dia. reel
1218 = 3.2 x 4.5 10 = 10 inch Dia. reel
2010 = 5.0 x 2.5 13 = 13 inch Dia. reel
2512 = 6.35 x 3.2
T. C. R. (code 9)
Tolerance (code 7) “―”=Basedonspec.
F = ±1% (―forthickfilmonly)
J=±5%(forjumperordering)
Packing style (code 8 )
R = Paper tape reel
K = Embossed plastic tape reel
Note:1.AllofourRSMDproductsareRoHScompliant."LFP"oftheinternal2Dreellabelmentions"LeadFreeProcess"
2. Letter L is system default code for ordering only
 3.ACseriesproductsareavailableby"Globalpartnumber"only
78
Features
• Reduce system size
• Low assembly cost
• Higher component and system reliability
• Suitable for applications of mobile phones, receivers,
battery chargers, palmtop computers and tablets
Derating curve Construction Schematics
Maximum dissipation (P) in percent-
age of rated power as a function of the
operating ambient temperature (Tamb).
100
80
60
40
20
-55 -40 -20 0 20 40 60 80
70
100 120 140 160
Ambient Temperature (
C)
Rated Power (%)
125
1 3
2 4
input signal
attenuated
output signal
The rectangular marker designates input pin 1
1 3
R2R2
R1
2 4
ATV 321
Dimensions
L
P
B
W
T
D
A
unit: mm
Type L W T A B P D
ATV321 1.00 ±0.10 1.00 ±0.10 0.35 ±0.05 0.33 ±0.10 0.15 ±0.10 0.65 ±0.10 0.25 ±0.10
Chip Resistors Selection Charts
AT - RF attenuator chip resistors, 0404
79
Electrical characteristics
Type Power
P70
Operating Temp.
range MPV VSWR
(Max.) Impedance Attenuation range & tolerance Frequency range
ATV321 40mW -55°Cto+125°C 50V 1.3 50Ω
-1dB to -5dB ±0.3 dB -1dB to -10dB DC to 2.5 GHz
-6dB to -10dB ±0.5 dB
-15dB ±1.0 dB -15dB to -20dB DC to 2.0 GHz
-20dB ±2.0 dB
Environmental characteristics
Performance test Test method Procedure Requirements
Life MIL-STD-202G-
method 108A 1 000 hours at 70 ±5°C applied RCWV
1.5 hours on, 0.5 hours off, still air required Max.: ±0.3 dB
Humidity
(steady state) JIS C 5202 7.5 1000hours,40±2°C,93(+2/-3)%RH
RCWV applied for 1.5 hours on and 0.5 hour off Max.: ±0.3 dB
Moisture resistance MIL-STD-202G-
method 106F Eachtemperature/humiditycycleisdefinedas8hours(method
106F),3cycles/24hoursfor10dwith25°C/65°C95%R.H Max.: ±0.3 dB
Thermal shock MIL-STD-202G-
method 107G LCT/UCT,numberofcyclesrequiredis300
Maximum transfer time is 20 seconds Max.: ±0.3 dB
Solder-
ability
Wetting J-STD-002B
testB
Electricaltestnotrequired.Magnification50X
Lead-free solder bath at 245 ±3°C
Dipping time: 3 ±0.5 seconds
Well tinned
(≥95%covered)
Resistance to
soldering heat MIL-STD-202G-
method 210F Lead-free solder, 260°C, 10 seconds immersion time Max.: ±0.1 dB
Short time overload MIL-R-55342D-
para 4.7.5 2.5 times RCWV or maximum overload voltage whichever is
less for 5 seconds at room temperature Max.: ±0.3 dB
Chip Resistors Selection Charts
AT - RF attenuator chip resistors, 0404
80
Chip Resistors Selection Charts
AT - RF attenuator chip resistors, 0404
Globalpartnumber-PreferredtypefororderingYageo/Phycompbrandedproducts
Ordering example: ATV321CR-071DBL
AT V 3 2 1 C R 0 7 1 D B L
Series name (code 1-2) Default code(1/2) (code 16)
AT=RFattenuatorthickfilm
Attenuation (code 12-15)
Size code (code 3-6) 0dB
(inch/metric) -1dB
V321 = 0404 = 1.0 x 1.0 -2dB
-10dB
Tolerance (code 7) -15dB
C = ±0.3dB -20dB
D = ±0.5dB
F = ±1dB Taping reel (code 10-11)
G = ± 2dB 07 = 7 inch Dia. reel
Packing style (code 8 ) T. C. R. (code 9)
R=Paper/PEtapereel “―”=Basedonspec.
(―forthickfilmonly)
Note:1.AllofourRSMDproductsareRoHScompliant."LFP"oftheinternal2Dreellabelmentions"LeadFreeProcess"
2. Letter L is system default code for ordering only
Phycomp worldwide - Traditional type
Packing paper tape
Quantity 10 000 2350 703 11…L
Remark Forlastthreedigits,seefollowingtable"Attenuationcodes"
Note: L = Default code
Phycomp CTC ordering code - Traditional type - North America
Packing paper tape
Quantity 10 000 9CV3218AXXXXX-PF3
Remark Forlast9thto13thdigits,seefollowingtable"Attenuationcodes"
Attenuation codes
Standard
Value
(dB) Tolerance
(dB) Phycomp worldwide code
(12NC) Phycomp North America code
(NA code)
1 ±0.3 012 01DBC
2 ±0.3 022 02DBC
3 ±0.3 032 03DBC
4 ±0.3 042 04DBC
5 ±0.3 052 05DBC
6 ±0.5 063 06DBD
7 ±0.5 073 07DBD
8 ±0.5 083 08DBD
9 ±0.5 093 09DBD
10 ±0.5 103 10DBD
15 ±1.0 154 15DBF
20 ±2.0 205 20DBG
81
Thickfilmchipresistors
Global CTC
(Preferred) Description Size Tolerance Max.
power Resistance
range Resistor
pieces Min.
items
RC0100-R-SKE24L RC0100,±1%&±5%,RoHScompliant,+Jumper 01005 F/J 1/32W 10 - 1M 100 100
RC0201-R-SKE24L RC0201,±1%&±5%,RoHScompliant,+Jumper 0201 F/J 1/20W 10 - 1M 100 120
RC0402JR-SKE24L RC0402,±5%,RoHScompliant,+Jumper 0402 J 1/16W 10 - 1M 100 110
RC0402FR-SKE96L RC0402,±1%,RoHScompliant,+Jumper 0402 F 1/16W 10 - 1M 100 450
RC0603JR-SKE24L RC0603,±5%,RoHScompliant,+Jumper 0603 J 1/10W 10 - 1M 50 110
RC0603FR-SKE96L RC0603,±1%,RoHScompliant,+Jumper 0603 F 1/10W 10 - 1M 50 450
RC0805JR-SKE24L RC0805,±5%,RoHScompliant,+Jumper 0805 J 1/8W 10 - 1M 50 110
RC0805FR-SKE96L RC0805,±1%,RoHScompliant,+Jumper 0805 F 1/8W 10 - 1M 50 280
RC1206JR-SKE24L RC1206,±5%,RoHScompliant,+Jumper 1206 J 1/4W 10 - 1M 50 110
RC1206FR-SKE96L RC1206,±1%,RoHScompliant,+Jumper 1206 F 1/4W 10 - 1M 50 350
Thickfilmarraychipresistors(convex)
Global CTC
(Preferred) Description Size Tolerance Max.
power Resistance
range Resistor
pieces Min.
items
YC12X-JR-SK001L YC124/YC122,±5%,+Jumper,RoHScompliant, 0402 X 2
0402 X 4 J1/16W 10 - 1M 100 75
Engineering design kit for current sensing application
Global CTC
(Preferred) Description Size Tolerance Max.
power Resistance
range Resistor
pieces Min.
items
CS0402-R-SK001L RL0402 - RL2512, ±1% & ±5%, RoHS compliant 0402 - 2512 F/J --- 100m - 910m 30 160
Engineering design kit for mobile application
Global CTC
(Preferred) Description Size Tolerance Max.
power Resistance
range Resistor
pieces Min.
items
MD0402-R-SK001L Chipresistors/MLCC/Attenuators --- --- --- --- 50 - 100 44
Note: Before ordering, please contact our sales force for detail of resistance
Engineering design kit for automotive application
Global CTC
(Preferred) Description Size Tolerance Max.
power Resistance
range Resistor
pieces Min.
items
AC0402-R-SK001L AC0402-AC1206,±1%&±5%,RoHScompliant,+Jumper 0402 - 1206 F/J --- 1 - 10M 50-100 200
Engineering design kit for general purpose
Global CTC Description Size Tolerance Max.
power Resistance
range Resistor
pieces Items
RC0402-R-SK001L
Chipresistors/MLCC 0402 - 1206 --- --- --- 50-100 472
Engineeringdesignbookforthinfilmchipresistor
Global CTC Description Size Tolerance Max.
power Resistance
range Resistor
pieces Items
RT0402-R-SB001L
RT0402 - RT1206, E96 series, ±0.1%, RoHS compliant 0402 - 1206 B --- 10 ~ 1M 10 60
Engineering design book for automotive application
Global CTC Description Size Tolerance Max.
power Resistance
range Resistor
pieces Items
AC0402-R-SB001L
AC0402 - AC1206, E96 series, ±1%, RoHS compliant 0402 - 1206 F --- 10 ~ 1M 10 60
Engineering design book for current sensing application
Global CTC Description Size Tolerance Max.
power Resistance
range Resistor
pieces Items
PE0603-R-SB001L
PA/PE/PR,±1%,RoHScompliant,lowT.C.R. 0603 - 2512 F --- 0.5m ~ 50m 10 60
Chip Resistors Engineering Design Kits
Engineering design kits/ Engineering design books
SMD CERAMIC MULTILAYER CAPACITORS
84
Specificationoverview
Description TC
code Series Capacitance range Voltage range Size
Discrete
NPO
General purpose 0.47 pF to 22 nF 10V to 50 V 01005, 0201, 0402, 0603,
0805, 1206, 1210,1812
Medium and High voltage 10 pF to 22 nF 100 V to 3000 V 0402, 0603, 0805, 1206,
1210, 1808, 1812
High frequency 0.2 pF to 100 pF 16V to 250 V 01005, 0201, 0402, 0603, 0805
X7R
General purpose & High capacitance 100 pF to 47 µF 6.3 V to 50 V 01005, 0201, 0402, 0603, 0805,
1206, 1210,1812, 2220
Medium and High voltage 100 pF to 2.2 µF 100 V to 3000 V 0603, 0805, 1206, 1210, 1812
Low inductance 10 nF to 220 nF 10 V to 50 V 0306, 0508, 0612
Soft termination 100pFto1μF 16 V to 630 V 0603, 0805,1206, 1210, 1808, 1812
X5R General purpose & High capacitance 100 pF to 100 µF 6.3 V to 50 V 01005, 0201, 0402, 0603,
0805, 1206, 1210,1812
Y5V General purpose & High capacitance 10 nF to 47 µF 6.3 V to 50 V 0201, 0402, 0603, 0805, 1206, 1210
Automotive grade
products
NP0 Automotive grade 10 pF to 10 nF 50 V to 630 V 0402, 0603, 0805,1206, 1210
X7R Automotive grade 100pFto2.2μF 16 V to 630 V 0402, 0603, 0805,1206, 1210
Safetycertification
products
NP0 High voltage SC type 2.0 pF to 470 pF X1/Y2,X2/Y3 1808, 1812
X7R High voltage SC type 150 pF to 1.5 nF X1/Y2,X2/Y3 1808, 1812
C-Arrays
NP0 4C arrays 10 pF to 470 pF 50 V 0508, 0612
X7R 4C arrays 180 pF to 100 nF 16 V to 50 V 0508, 0612
Y5V 4C arrays 10 nF to 100 nF 25 V 0612
MLCC General Information
Specification overview
85
Global part number
Ordering example: CC0201KRX7R8BB102
C C 0 2 0 1 K R X 7 R 8 B B 1 0 2
Series name (code 1-2) Capacitance value (code 15-17)
CA = 4 x Capacitors array 102 = 1 000 pF
CC = Multilayer chip capacitors (2significantdigits+numberofzeros;
CL = Low inductance capacitors the3rddigitsignifiesthemultiplying
CQ = High frequency capacitors factor, and letter R is decimal point)
SC=Safetycertificationcapacitors 0 = x 1
AC = Automotive grade capacitors 1 = x 10 1
CS = Soft termination capacitors 2 = x 10 2
3 = x 10 3
Size code (code 3-6) 4 = x 10 4
0100 5 = x 10 5
0201 6 = x 10 6
0402 7 = x 10 7
0603 X X R = Special capacitance
0805 (X X: capacitance before decimal point)
1206
1210 Process code (code 14)
1808 N = NP0
1812 B = Class 2 product
2220
0306
0508 Termination (code 13)
0612 B = Ni-Barrier
Capacitance tolerance (code 7)
A = ±0.05 pF (CQ series only)
B = ±0.1 pF Rated voltage (code 12)
C = ±0.25 pF 5 = 6.3 V
D = ±0.5 pF 6 = 10 V
F = ±1% 7 = 16 V
G = ±2% 8 = 25 V
J = ±5% G = 35 V
K = ±10% 9 = 50 V
M = ±20% 0 = 100 V
Z=-20%to+80% A = 200 V
Y = 250 V
Packing style (code 8) B = 500 V
R=Paper/PEtapereelØ7inch Z=630V
P=Paper/PEtapereelØ13inch C = 1 kV
K=EmbossedplastictapereelØ7inch D = 2 kV
F=EmbossedplastictapereelØ13inch E = 3 kV
C = Bulk case T=X2/Y3forTUV/UL
W=X1/Y2forTUV/UL
TC material (code 9-11) U = X1 for UL (X7R, 1812)
NPO
X5R
X7R
Y5V
MLCC General Information
Ordering information - Global part number
86
Global part number
Orderingexample:CCxxxxKRX5RxBBxxx(forLowprofile)
C C 1 05 9 K R X 7 R 8 B B 1 0 2
Series name (code 1-2) Capacitance value (code 15-17)
CC = Multilayer chip capacitors 102 = 1 000 pF
(2significantdigits+numberofzeros;
the3rddigitsignifiesthemultiplying
Number of cap (code 3) factor, and letter R is decimal point)
4 = 4 cap 0 = x 1
2 = 2 cap 1 = x 10 1
1 = Single 2 = x 10 2
3 = x 10 3
Size code (code 4-5) 4 = x 10 4
01 = 0201 5 = x 10 5
02 = 0402 6 = x 10 6
03 = 0603 7 = x 10 7
05 = 0805 X X R = Special capacitance
06 = 1206, 0306 (X X: capacitance before decimal point)
08 = 1808, 0508
10 = 1210 Process code (code 14)
12 = 1812, 0612 N = NP0
B = Class 2 product
Thickness (code 6)
3 = 0.3 mm Termination (code 13)
4 = 0.45 mm B = Ni-Barrier
5 = 0.5 mm
6 = 0.6 mm Rated voltage (code 12)
8 = 0.8 mm 5 = 6.3 V
9 = 0.85 mm 6 = 10 V
A = 1.0 mm 7 = 16 V
B = 1.25 mm 8 = 25 V
C = 1.6 mm 9 = 50 V
D = 2.0 mm 0 = 100 V
E = 2.5 mm A = 200 V
F = 1.7 mm B = 500 V
M = 1.15 mm C = 1 kV
N = 1.35 mm D = 2 kV
Q = 1.5 mm E = 3 kV
R = 1.8 mm G = 35 V
Y = 250 V
Capacitance tolerance (code 7) Z=630V
B = ±0.1 pF
C = ±0.25 pF
D = ±0.5 pF TC material (code 9-11)
F = ±1% X5R
G = ±2% X7R
J = ±5%
K = ±10%
M = ±20%
Z=-20%to+80%
Packing style (code 8)
R=Paper/PEtapereelØ7inch
P=Paper/PEtapereelØ13inch
K=EmbossedplastictapereelØ7inch
F=EmbossedplastictapereelØ13inch
C = Bulk case
MLCC Selection Charts
Ordering information - Global part number
87
Thickness classes and packing quantities
Description Size
code
Thickness
classification
(mm)
Quantity per reel Quantity
per
bulk case
Tape width 180mm/7” 330mm/13”
Paper Blister Paper Blister
Discrete capacitors
01005 0.2±0.02
8 mm
20 000 --- --- --- ---
0201 0.3±0.03/±0.05 15 000 --- 50 000 --- ---
0402 0.5±0.05/±0.15/±0.20 10 000 --- 50 000 --- 50 000
0603 0.8±0.1/±0.2 4 000 --- 15 000 --- 15 000
0805
0.6 ±0.1 4 000 --- 20 000 --- 10 000
0.85/1.0±0.1 4 000 --- 15 000 --- 8 000
1.25 ±0.2 --- 3 000 --- 10 000 5 000
1206
0.6 ±0.1 4 000 --- 20 000 --- ---
0.85 ±0.1 4 000 --- 15 000 --- ---
1.00/1.15±0.1 --- 3 000 --- 10 000 ---
1.25 ±0.2 --- 3 000 --- 10 000 ---
1.6 ±0.15 --- 2 500 --- 10 000 ---
1.6±0.2/±0.3 --- 2 000 --- 10 000 ---
1210
0.6/0.7±0.1 --- 4 000 --- 15 000 ---
0.85 ±0.1 --- 4 000 --- 10 000 ---
1.0 ±0.15 --- 3 000 --- 10 000 ---
1.15 ±0.1 --- 3 000 --- 10 000 ---
1.15 ±0.15 --- 3 000 --- 10 000 ---
1.25 ±0.2 --- 3 000 --- --- ---
1.5 ±0.1 --- 2 000 --- --- ---
1.6/1.9±0.2 --- 2 000 --- --- ---
2.0 ±0.2 --- 2000/1000 --- --- ---
2.5±0.2/±0.3 --- 1000/500 --- --- ---
1808
1.15 ±0.15
12 mm
--- 3 000 --- --- ---
1.25 ±0.2 --- 3 000 --- --- ---
1.35 ±0.15 --- 2 000 --- --- ---
1.5 ±0.1 --- 2 000 --- --- ---
1.6 ±0.2 --- 2 000 --- 8 000 ---
2.0 ±0.2 --- 2 000 --- --- ---
1812
0.6/0.85±0.1 --- 2 000 --- --- ---
1.15 ±0.1 --- 1 000 --- --- ---
1.15 ±0.15 --- 1 000 --- --- ---
1.25 ±0.2 --- 1 000 --- --- ---
1.35 ±0.15 --- 1 000 --- --- ---
1.5 ±0.1 --- 1 000 --- --- ---
1.6 ±0.2 --- 1 000 --- --- ---
2.0 ±0.2 --- 1 000 --- --- ---
2220 0.85 ±0.1 --- 1 500 --- --- ---
1.15 ±0.1 --- 1 500 --- --- ---
Low inductance
0306 0.5 ±0.1
8 mm
4 000 --- 15 000 --- ---
0508 0.85 ±0.1 4 000 --- 15 000 --- ---
0612 0.85 ±0.1 4 000 --- 15 000 --- ---
Arrays 0508 0.6 ±0.1 4 000 --- --- --- ---
0612 0.8 ±0.1 4 000 --- --- --- ---
MLCC General Information
Thickness classes and packing quantities for all series
88
MLCC Selection Charts
NPO - General purpose 16 to 50V, 01005 to 1812
Temperature characteristic Construction
Case dimensions
Discrete capacitors - General purpose
L2L3
L4
L1
W
Case size designation Dimensions in mm
Inch-based Metric L1W L2/L3 min L2/L3 max L4 min
01005 0402M 0.4±0.02 0.2±0.02 0.07 0.14 0.14
0201 0603M 0.6 ±0.03 0.3 ±0.03 0.10 0.20 0.20
0402 1005M 1.0 ±0.05 0.5 ±0.05 0.15 0.30 0.40
0603 1608M 1.6 ±0.10 0.8 ±0.10 0.20 0.60 0.40
0805 2012M 2.0 ±0.10
(1) 1.25 ±0.10 (1) 0.25 0.75 0.55
2.0 ±0.20 (2) 1.25 ±0.20 (2) 0.25 0.75 0.55
1206 3216M 3.2 ±0.15 (1) 1.6 ±0.15 (1) 0.25 0.75 1.40
3.2 ±0.30 (2) 1.6 ±0.20 (2) 0.25 0.75 1.40
1210 3225M 3.2 ±0.20 (1) 2.5 ±0.20 (1) 0.25 0.75 1.40
3.2 ±0.40 (2) 2.5 ±0.30 (2) 0.25 0.75 1.40
1812 4532M 4.5 ±0.20 (1) 3.2 ±0.20 (1) 0.25 0.75 2.20
4.5 ±0.40
(2) 3.2 ±0.40 (2) 0.25 0.75 2.20
Note: 1.Dimensionforsize0805to1812,C≤1nF
2. Dimension for size 0805 to 1812, C > 1 nF
Features
• Ultra-stable on capacitance
• Tight tolerance available
• High reliability
• Low ESR
• Good frequency performance
• No aging of capacitance
40
0
20
0 40 80 120
T ( C)
TC
(x10 /K)
- 6
-40
-40
-20
89
MLCC Selection Charts
NPO - General purpose 16 to 50V, 01005 to 0603
NP0
General purpose
Capacitance 01005 0201 0402 0603
16 V 16 V 25 V 50 V 16 V 25 V 50 V 16 V 25 V 50 V
0.22 pF
0.3 ±0.03 0.3 ±0.03 0.3 ±0.03
0.47 pF
0.56 pF
0.5 ±0.05 0.5 ±0.05 0.5 ±0.05
0.8 ±0.1 0.8 ±0.1 0.8 ±0.1
0.68 pF
0.82 pF
1 pF
1.2 pF
1.5 pF
1.8 pF
2.2 pF
2.7 pF
3.3 pF
3.9 pF
4.7 pF
5.6 pF
6.8 pF
8.2 pF
10 pF
0.2 ±0.02
12 pF
15 pF
18 pF
22 pF
27 pF
33 pF
39 pF
47 pF
56 pF
68 pF
82 pF
100 pF
120 pF
150 pF
180 pF
220 pF
270 pF
330 pF
390 pF
470 pF
560 pF
680 pF
820 pF
1000 pF 0.5 ±0.05 0.5 ±0.05 0.5 ±0.05
Tape width 8 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
90
MLCC Selection Charts
NPO - General purpose 16 to 50V, 01005 to 0603
NP0
General purpose
Capacitance 01005 0201 0402 0603
16 V 16 V 25 V 50 V 16 V 25 V 50 V 16 V 25 V 50 V
1.2 nF
0.8 ±0.1 0.8 ±0.1 0.8 ±0.1
1.5 nF
1.8 nF
2.2 nF
2.7 nF
3.3 nF
3.9 nF
4.7 nF
5.6 nF
6.8 nF
8.2 nF
10 nF
12 nF
15 nF
18 nF
22 nF
33 nF
39 nF
Tape width 8 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
91
NPO - General purpose 16 to 50V, 0805 to 1812
MLCC Selection Charts
NP0
General purpose
Capacitance 0805 1206 1210 1210 1812
16 V 25 V 50 V 16 V 25 V 50 V 25 V 50 V 50 V
0.22 pF
0.47 pF
0.6 ±0.1 0.6 ±0.1 0.6 ±0.1 0.6 ±0.1 0.6 ±0.1 0.6 ±0.1
0.56 pF
0.68 pF
0.82 pF
1 pF
1.2 pF
1.5 pF
1.8 pF
2.2 pF
2.7 pF
3.3 pF
3.9 pF
4.7 pF
5.6 pF
6.8 pF
8.2 pF
10 pF
12 pF
15 pF
18 pF
22 pF
27 pF
33 pF
39 pF
47 pF
1.25 ±0.2 1.25 ±0.2
56 pF
1.25 ±0.2
68 pF
82 pF
100 pF
120 pF
150 pF
180 pF
220 pF
270 pF
330 pF
390 pF
470 pF
560 pF
680 pF
820 pF
1000 pF
Tape width 8 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
92
NPO - Gerneral purpose 16 to 50V, 0805 to 1812
MLCC Selection Charts
NP0
General purpose
Capacitance 0805 1206 1210 1210 1812
16 V 25 V 50 V 16 V 25 V 50 V 25 V 50 V 50 V
1.2 nF
0.85 ±0.1 0.85 ±0.1 0.85 ±0.1
0.6 ±0.1 0.6 ±0.1 0.6 ±0.1
1.25 ±0.2 1.25 ±0.2
1.25 ±0.2
1.5 nF
1.8 nF
2.2 nF
1.25 ±0.2 1.25 ±0.2 1.25 ±0.2
2.7 nF
3.3 nF
0.85 ±0.1 0.85 ±0.1 0.85 ±0.1
3.9 nF
4.7 nF
5.6 nF
6.8 nF
8.2 nF
1.25 ±0.2 1.25 ±0.2 1.25 ±0.2
10 nF 1.25 ±0.2 1.25 ±0.2 1.25 ±0.2
12 nF
15 nF
18 nF
22 nF 2.0 ±0.2 2.0 ±0.2
33 nF 0.85 ±0.1 0.85 ±0.1 0.85 ±0.1
39 nF
47 nF 1.15 ±0.1 1.15 ±0.1 1.15 ±0.1
56 nF 1.6 ±0.2 1.6 ±0.2 1.6 ±0.2
68 nF
1.6 ±0.2 1.6 ±0.2 1.6 ±0.282 nF
100 nF
Tape width 8 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
93
NPO - Medium & High voltage, 0402 to 1812
MLCC Selection Charts
Temperature characteristic Construction
Dimensions
Discrete capacitors - Medium and High voltage
L2L3
L4
L1
W
Case size designation Dimensions in mm
Inch-based Metric L1W L2/L3 min L2/L3 max L4 min
0402 1005M 1.0 ±0.05 0.5 ±0.05 0.15 0.30 0.40
0603 1608M 1.6 ±0.10 0.8 ±0.10 0.20 0.60 0.40
0805 2012M 2.0 ±0.20 1.25 ±0.20 0.25 0.75 0.55
1206 3216M 3.2 ±0.30 1.6 ±0.20 0.25 0.75 1.40
1210 3225M 3.2 ±0.40 2.5 ±0.30 0.25 0.75 1.40
1808 4520M 4.5 ±0.40 2.0 ±0.30 0.25 0.75 2.20
1812 4532M 4.5 ±0.40 3.2 ±0.30 0.25 0.75 2.20
Features
• Capable of operating at high voltage levels
• For high frequency snubber
• Decoupling/smoothingfunction
40
0
20
0 40 80 120
T ( C)
TC
(x10 /K)
- 6
-40
-40
-20
94
NPO - Medium voltage, 0402 to 0805
MLCC Selection Charts
NP0
Medium voltage
Capacitance 0402 0603 0805
100 V 100 V 250 V 100 V 250 V 500 V 630 V
1 pF
0.5 ±0.05
0.8 ±0.1
0.8 ±0.1
0.6 ±0.1
0.6 ±0.1 0.6 ±0.1 0.6 ±0.1
1.2 pF
1.5 pF
1.8 pF
2.2 pF
2.7 pF
3.3 pF
3.9 pF
4.7 pF
5.6 pF
6.8 pF
8.2 pF
10 pF
12 pF
15 pF
18 pF
22 pF
27 pF
33 pF
39 pF
47 pF
56 pF
68 pF
82 pF
100 pF
120 pF
150 pF
180 pF
220 pF
0.85 ±0.1
0.85 ±0.1 0.85 ±0.1
270 pF
330 pF
390 pF
470 pF
560 pF
1.25 ±0.2 1.25 ±0.2
680 pF
820 pF
1000 pF
1.2 nF
0.85 ±0.1
1.25 ±0.2
1.5 nF
1.8 nF
2.2 nF
1.25 ±0.2
2.7 nF
3.3 nF
3.9 nF
4.7 nF
Tape width 8 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
95
NPO - Medium voltage, 1206 / 1210
MLCC Selection Charts
NP0
Medium voltage
Capacitance 1206 1210
100 V 250 V 500 V 630 V 100 V 250 V 500 V 630 V
1 pF
1.2 pF
1.5 pF
1.8 pF
2.2 pF
0.6 ±0.1
2.7 pF
3.3 pF
3.9 pF
4.7 pF
5.6 pF
6.8 pF
8.2 pF
10 pF
1.25 ±0.2
12 pF
15 pF
18 pF
22 pF
27 pF
33 pF
1.25 ±0.2
39 pF
47 pF
1.25 ±0.2 1.25 ±0.2 1.25 ±0.2
56 pF
68 pF
82 pF
100 pF
120 pF
150 pF
180 pF
220 pF
270 pF
330 pF
390 pF
470 pF
560 pF
680 pF
820 pF
0.85 ±0.1 0.85 ±0.1
1000 pF
1.2 nF
0.6 ±0.1
1.25 ±0.2
1.25 ±0.2 1.25 ±0.2
1.5 nF
1.8 nF
1.25 ±0.2
1.25 ±0.2
2.2 nF
2.7 nF
3.3 nF
0.85 ±0.1
3.9 nF
4.7 nF
5.6 nF
6.8 nF
8.2 nF 1.25 ±0.2
10 nF
Tape width 8 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
96
NP0
High voltage
Capacitance 0805 1206 1210
1000 V 1000 V 2000 V 1000 V 2000 V
10 pF
0.85 ±0.1
1.25 ±0.2 1.25 ±0.2
12 pF
15 pF
18 pF
22 pF
27 pF
33 pF
1.25 ±0.2 1.25 ±0.2
39 pF
47 pF
56 pF
68 pF
82 pF
100 pF
120 pF
150 pF
180 pF
220 pF
270 pF
330 pF
390 pF
470 pF
560 pF
680 pF
820 pF
1000 pF
1.2 nF
1.5 nF
1.8 nF
2.2 nF
2.7 nF
3.3 nF
3.9 nF
4.7 nF
5.6 nF
6.8 nF
8.2 nF
10 nF
12 nF
15 nF
18 nF
22 nF
33 nF
Tape width 8 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
NPO - High voltage, 0805 to 1210
MLCC Selection Charts
97
NP0
High voltage
Capacitance 1808 1812
1000 V 2000 V 3000 V 1000 V 2000 V 3000 V
10 pF
1.6 ±0.2
1.25 ±0.2
1.25 ±0.2 1.25 ±0.2
12 pF
15 pF
18 pF
22 pF
27 pF
33 pF
1.25 ±0.2 1.25 ±0.2
39 pF
47 pF
56 pF
68 pF
82 pF
100 pF
120 pF
150 pF
180 pF 2.0 ±0.2
220 pF
270 pF
330 pF
390 pF
470 pF
560 pF
680 pF
820 pF
1000 pF 1.25 ±0.2
1.2 nF
1.5 nF
1.8 nF
2.2 nF
2.7 nF
3.3 nF
3.9 nF
4.7 nF
5.6 nF
6.8 nF
8.2 nF
10 nF
12 nF
15 nF
18 nF
22 nF
33 nF
Tape width 12 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
NPO - High voltage, 1808 / 1812
MLCC Selection Charts
98
ESR characteristic
Construction
NP0 - High frequency, 01005 to 0805
MLCC Selection Charts
Features
• Lowest ESR in high frequency
• Ultra small
• Noisefiltering
Impendance and ESR @ 20C
ESR
Impendance
Frequency (Hz)
100K 1M 10M 100M 1G 10G
100m
1
10
100
1K
Z
()
99
NP0 - High frequency, 01005 to 0805
MLCC Selection Charts
Case dimensions
Discrete capacitors - High Frequency
L2L3
L4
L1
W
Case size designation Dimensions in mm
Inch-based Metric L1W L2/L3 min L2/L3 max L4 min
01005 0402M 0.4 ±0.02 0.2 ±0.02 0.07 0.14 0.13
0201 0603M 0.6 ±0.03 0.3 ±0.03 0.10 0.20 0.20
0402 1005M 1.0 ±0.05 0.5 ±0.05 0.15 0.30 0.40
0603 1608M 1.6 ±0.10 0.8 ±0.10 0.20 0.60 0.40
0805 2012M 2.0 ±0.10 1.25 ±0.10 0.25 0.75 0.55
NP0
High frequency
Capaci-
tance 01005 0201 0402
16 V 16 V 25 V 16 V 25 V 50 V
0.2 pF
0.2 ±0.02 0.3 ±0.03 0.3 ±0.03
0.5 ±0.05 0.5 ±0.05 0.5 ±0.05
0.3 pF
0.4 pF
0.5 pF
0.6 pF
0.7 pF
0.8 pF
0.9 pF
1 pF
1.2 pF
1.5 pF
1.8 pF
2.2 pF
2.7 pF
3.3 pF
3.9 pF
4.7 pF
5.6 pF
6.8 pF
8.2 pF
10 pF
12 pF
15 pF
18 pF
22 pF
27 pF
33 pF
39 pF
47 pF
Tape
width 8 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
NP0
High frequency
Capaci-
tance 0603 0805
50 V 100 V 250 V 50 V 100 V 250 V
0.22 pF
0.8 ±0.1 0.8 ±0.1 0.8 ±0.1
0.6 ±0.1 0.6 ±0.1 0.6 ±0.1
0.47 pF
0.56 pF
0.68 pF
0.82 pF
1 pF
1.2 pF
1.5 pF
1.8 pF
2.2 pF
2.7 pF
3.3 pF
3.9 pF
4.7 pF
5.6 pF
6.8 pF
8.2 pF
10 pF
12 pF
15 pF
18 pF
22 pF
27 pF
33 pF
39 pF
47 pF
56 pF
68 pF
82 pF
100 pF
Tape
width 8 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
100
X7R - General purpose & High capacitance, 01005 to 2220
MLCC Selection Charts
Temperature characteristic Construction
Case dimensions
Discrete capacitors - General purpose & High capacitance
L2L3
L4
L
1
W
Case size designation Dimensions in mm
Inch-based Metric L1W L2/L3 min L2/L3 max L4 min
01005 0402M 0.4±0.02 0.2±0.02 0.07 0.14 0.14
0201 0603M 0.6 ±0.03 0.3 ±0.03 0.10 0.20 0.20
0.6 ±0.05 0.3 ±0.05 0.10 0.20 0.20
0402 1005M 1.0 ±0.05 (1) 0.5 ±0.05 (1) 0.15 0.30 0.40
1.0 ±0.20 (2) 0.5 ±0.20 (2) 0.15 0.30 0.40
0603 1608M 1.6 ±0.10 (1) 0.8 ±0.10 (1) 0.20 0.60 0.40
1.6 ±0.15 (2) 0.8 ±0.15 (2) 0.20 0.60 0.40
0805 2012M 2.0 ±0.10 (1) 1.25 ±0.10 (1) 0.25 0.75 0.55
2.0 ±0.20 (2) 1.25 ±0.20 (2) 0.25 0.75 0.55
1206 3216M 3.2 ±0.15 (1) 1.6 ±0.15 (1) 0.25 0.75 1.40
3.2 ±0.30 (2) 1.6 ±0.20 (2) 0.25 0.75 1.40
1210 3225M 3.2 ±0.20 (1) 2.5 ±0.20 (1) 0.25 0.75 1.40
3.2 ±0.40 (2) 2.5 ±0.30 (2) 0.25 0.75 1.40
1808 4520M 4.5 ±0.40 2.0 ±0.30 0.25 0.75 2.20
1812 4532M 4.5 ±0.20 (1) 3.2 ±0.20 (1) 0.25 0.75 2.20
4.5 ±0.40 (2) 3.2 ±0.40 (2) 0.25 0.75 2.20
2220 5750M 5.7 ±0.40 5.0 ±0.30 0.25 0.75 3.40
Note: 1.Dimensionforsize0402,C<4.7μF;0603,C<10μF;0805to1812,C≤100nF
 2.Dimensionforsize0402,C≥4.7μF;0603,C≥10μF;0805to1812,C>100nF
Features
• Semi-stable on capacitance and high K
• Highvolumetricefficiency
• Highly reliable in high temperature application
• High insulation resistance
15
5
-15 -25-55 5 40 9565 125
10
-10
C
C
(%)
-5
0
T ( C)
101
X7R - General purpose & High Capacitance , 01005 to 0402
MLCC Selection Charts
X7R
General purpose
Capacitance 01005 0201 0402
6.3 V 10 V 6.3 V 10 V 16 V 25 V 50 V 6.3 V 10 V 16 V 25 V 50 V
10 pF
15 pF
22 pF
33 pF
47 pF
0.3 ±0.03 0.3 ±0.03 0.3 ±0.03 0.3 ±0.03
0.3 ±0.03
68 pF
100 pF
0.2 ±0.02 0.2 ±0.02
0.5 ±0.05 0.5 ±0.05 0.5 ±0.05 0.5 ±0.05 0.5 ±0.05
150 pF
220 pF
330 pF
470 pF
680 pF
1.0 nF
1.5 nF
2.2 nF
3.3 nF
4.7 nF
6.8 nF
10 nF
15 nF
22 nF
33 nF
47 nF
68 nF
100 nF
150 nF
220 nF 0.5 ±0.05 0.5 ±0.05 0.5 ±0.05
330 nF
470 nF 0.5 ±0.05 0.5 ±0.05
680 nF
1000 nF 0.5 ±0.05
2.2 µF
4.7 µF
10 µF
22 µF
47 µF
100 µF
Tape width 8 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
102
X7R - General purpose & High capacitance, 0603 / 0805
MLCC Selection Charts
X7R
General purpose
Capacitance 0603 0805
6.3 V 10 V 16 V 25 V 50 V 6.3 V 10 V 16 V 25 V 50 V
10 pF
15 pF
22 pF
33 pF
47 pF
68 pF
100 pF
0.8 ±0.1 0.8 ±0.1 0.8 ±0.1
0.8 ±0.1 0.8 ±0.1
150 pF
0.6 ±0.1 0.6 ±0.1 0.6 ±0.1 0.6 ±0.1 0.6 ±0.1
220 pF
330 pF
470 pF
680 pF
1.0 nF
1.5 nF
2.2 nF
3.3 nF
4.7 nF
6.8 nF
10 nF
15 nF
22 nF
33 nF
0.85 ±0.1 0.85 ±0.1 0.85 ±0.1 0.85 ±0.1 0.85 ±0.1
47 nF
68 nF
100 nF
150 nF
220 nF
1.25 ±0.2
330 nF
1.25 ±0.2 1.25 ±0.2 1.25 ±0.2 1.25 ±0.2
470 nF 0.8 ±0.1
680 nF
1000 nF 0.8 ±0.1 0.8 ±0.15
2.2 µF
4.7 µF
10 µF
22 µF
47 µF
100 µF
Tape width 8 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
103
X7R - General purpose & High capacitance, 1206 to 2220
MLCC Selection Charts
X7R
General purpose
Capacitance 1206 1210 1812 2220
6.3 V 10 V 16 V 25 V 50 V 6.3 V 10 V 16 V 25 V 50 V 50 V 50 V
10 pF
15 pF
22 pF
33 pF
47 pF
68 pF
100 pF
150 pF
220 pF
0.85 ±0.1 0.85 ±0.1 0.85 ±0.1 0.85 ±0.1
0.85 ±0.1
330 pF
470 pF
680 pF
1.0 nF
1.5 nF
2.2 nF
0.85 ±0.1 0.85 ±0.1 0.85 ±0.1 0.85 ±0.1
0.85 ±0.1
3.3 nF
4.7 nF
0.85 ±0.1
6.8 nF
10 nF
15 nF
22 nF
33 nF
47 nF
68 nF
100 nF
1.15 ±0.1
150 nF 1.15 ±0.1 1.15 ±0.1220 nF
0.85 ±0.1
330 nF 0.85 ±0.1
470 nF 1.0 ±0.1 1.15 ±0.1 1.15 ±0.1 1.15 ±0.1 1.15 ±0.1 1.25 ±0.2680 nF
1.15 ±0.1 1.15 ±0.1 1.15 ±0.1 1.15 ±0.1 1.6 ±0.2
1000 nF
1.6 ±0.2
1.25 ±0.2 1.25 ±0.2 1.25 ±0.2 1.25 ±0.2 1.15 ±0.1
2.2 µF
1.9 ±0.2 1.9 ±0.2 1.9 ±0.2 1.9 ±0.2
1.9 ±0.2
4.7 µF
1.6 ±0.2 1.6 ±0.2 1.6 ±0.2 1.6 ±0.2 2.5 ±0.2
10 µF
22 µF 2.5 ±0.2 2.5 ±0.2 2.5 ±0.2 2.5 ±0.2
47 µF
100 µF
Tape width 8 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
104
X7R - Medium & High voltage, 0402 to 1812
MLCC Selection Charts
Temperature characteristic Construction
Dimensions
Discrete capacitors - Medium and High voltage
L2L3
L4
L1
W
Case size designation Dimensions in mm
Inch-based Metric L1W L2/L3 min L2/L3 max L4 min
0402 1005M 1.0 ±0.05 0.5 ±0.05 0.15 0.30 0.40
0603 1608M 1.6 ±0.10 0.8 ±0.10 0.20 0.60 0.40
0805 2012M 2.0 ±0.20 1.25 ±0.20 0.25 0.75 0.55
1206 3216M 3.2 ±0.30 1.6 ±0.20 0.25 0.75 1.40
1210 3225M 3.2 ±0.40 2.5 ±0.30 0.25 0.75 1.40
1808 4520M 4.5 ±0.40 2.0 ±0.30 0.25 0.75 2.20
1812 4532M 4.5 ±0.40 3.2 ±0.30 0.25 0.75 2.20
Features
• Capable of operating at high voltage levels
• For high frequency snubber
• Decoupling/smoothingfunction
15
5
-15 -25-55 5 40 9565 125
10
-10
C
C
(%)
-5
0
T ( C)
105
X7R - Medium and High voltage, 0402 to 0805
MLCC Selection Charts
X7R
Medium voltage & High voltage
Capacitance 0402 0603 0805
100 V 100 V 250 V 100 V 250 V 500 V 630 V 1000 V
100 pF
0.5 ±0.05
0.8 ±0.1
150 pF
0.6 ±0.1
0.85 ±0.1 0.85 ±0.1 0.85 ±0.1
0.85 ±0.1
220 pF
0.8 ±0.1
330 pF
470 pF
680 pF
1.0 nF
1.5 nF
2.2 nF
3.3 nF
4.7 nF
6.8 nF
1.25 ±0.2
10 nF
1.25 ±0.2
1.25 ±0.2
15 nF 0.85 ±0.1
22 nF
33 nF
1.25 ±0.2
47 nF
68 nF
100 nF
150 nF
220 nF
330 nF
470 nF
680 nF
1000 nF
2.2 µF
4.7 µF
10 µF
22 µF
47 µF
100 µF
Tape width 12 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
106
X7R - Medium and High voltage, 1206 / 1210
MLCC Selection Charts
X7R
Medium voltage & High voltage
Capacitance 1206 1210
100 V 250 V 500 V 630 V 1000 V 2000 V 100 V 250 V 500 V 630 V 1000 V 2000 V
100 pF
150 pF
220 pF
0.85 ±0.1
0.85 ±0.1 1.25 ±0.2 1.25 ±0.2 1.25 ±0.2
1.25 ±0.2
330 pF
470 pF
680 pF
1.0 nF
1.25 ±0.2 1.25 ±0.2
1.5 nF
2.2 nF
0.85 ±0.1
0.85 ±0.1
3.3 nF
1.25 ±0.2
1.25 ±0.2
4.7 nF
6.8 nF
10 nF
15 nF
22 nF
1.25 ±0.2
1.6 ±0.2
1.25 ±0.2
1.6 ±0.2 1.6 ±0.2 1.6 ±0.2
33 nF 1.6 ±0.2
47 nF
68 nF
1.25 ±0.2
100 nF 1.6 ±0.2
150 nF 1.25 ±0.2
220 nF
330 nF 1.6 ±0.2 1.6 ±0.2
470 nF 1.25 ±0.2
680 nF
1000 nF 1.6 ±0.2 2.0 ±0.2
2.2 µF
4.7 µF
10 µF
22 µF
47 µF
100 µF
Tape width 12 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
107
X7R - Medium and High voltage, 1808 / 1812
MLCC Selection Charts
X7R
Medium voltage & High voltage
Capacitance 1808 1812
1000 V 2000 V 3000 V 100 V 250 V 500 V 630 V 1000 V 2000 V 3000 V
100 pF
150 pF
1.6 ±0.2
220 pF
330 pF
1.35 ±0.2
470 pF
1.35 ±0.2
680 pF
1.0 nF 2.0 ±0.2
1.35 ±0.2
1.35 ±0.2
1.6 ±0.2
1.5 nF
2.2 nF 1.6 ±0.2
3.3 nF
1.25 ±0.2
1.25 ±0.2
4.7 nF
0.85 ±0.1
0.85 ±0.1
6.8 nF 1.6 ±0.2 1.6 ±0.2
10 nF 2.0 ±0.2
15 nF
22 nF
33 nF 1.6 ±0.2
47 nF
1.25 ±0.2
68 nF
100 nF
1.25 ±0.2
1.6 ±0.2
150 nF
220 nF
1.6 ±0.2330 nF
470 nF
1.6 ±0.2680 nF
1000 nF
2.2 µF
4.7 µF
10 µF
22 µF
47 µF
100 µF
Tape width 12 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
108
X7R / X5R - Low inductance, 0306 to 0612
MLCC Selection Charts
Temperature characteristic Construction
Dimensions
Discrete capacitors - Low inductance types only
T
L2L3
L4
L
1
W
Case size designation Dimensions in mm
Inch-based Metric L1W T L2/L3 min L2/L3 max L4 min
0306 0816M 0.8 ±0.15 1.6 ±0.20 0.50 ±0.10 0.10 0.30 0.20
0508 1220M 1.25 ±0.20 2.0 ±0.20 0.85 ±0.10 0.13 0.46 0.38
0612 1632M 1.6 ±0.20 3.2 ±0.20 0.85 ±0.10 0.13 0.46 0.50
Features
• Good solution for anti resonance reduction with
controlled ESR
• Suitable for high speed IC decoupling due to low
inductance type
15
5
-15 -25-55 5 40 9565 125
10
-10
C
C
(%)
-5
0
T ( C)
109
X7R / X5R - Low inductance, 0306 to 0612
MLCC Selection Charts
X7R
Low Inductance series
Capacitance 0306 0508 0612
10 V 10 V 16 V 25 V 16 V 25 V 50 V
10 nF
0.85 ±0.1
0.85 ±0.1
0.85 ±0.1 0.85 ±0.1
22 nF
47 nF
100 nF 0.5 ±0.1 0.85 ±0.1
220 nF
0.85 ±0.1 1.15 ±0.1 1.15 ±0.1
470 nF
1000 nF 1.15 ±0.1
Tape width 8 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
X5R
Low Inductance series
Capacitance 0306
6.3 V 10 V 16 V
100 nF
220 nF
470 nF 0.5±0.1
1000 nF 0.5±0.1 0.5±0.1
Tape width 8 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
110
X7R - Soft termination, 0603 to 1812
MLCC Selection Charts
Temperature characteristic Construction
Dimensions
Discrete capacitors - Soft termination
Case size designation Dimensions in mm
Inch-based Metric L1 W L2/L3min L2/L3max L4 min
0603 1608M 1.6 ±0.20 0.8 ±0.15 0.20 0.50 0.40
0805 2012M 2.0 ±0.30 1.25 ±0.20 0.25 0.75 0.55
1206 3216M 3.2 ±0.40 1.6 ±0.20 0.25 0.85 1.40
1210 3225M 3.2 ±0.40 2.5 ±0.30 0.25 0.85 1.40
1812 4532M 4.5 ±0.40 3.2 ±0.20 0.25 0.85 2.20
Features
• Flexible termination system
• Improved resistance to thermal stresses
• Increased mechanical performance
15
5
-15 -25-55 5 40 9565 125
10
-10
C
C
(%)
-5
0
T ( C)
Copper
Ni Plating
Sn Plating
Soft electrode
(Stress relaxation)
L2L3
L4
L1
W
111
X7R - Soft termination, 0603 / 0805
MLCC Selection Charts
X7R
Soft termination
Capacitance 0603 0805
16 V 25 V 50 V 100 V 250 V 50 V 100 V 250 V 500 V 630 V 1000 V
100 pF
0.8 ±0.15
0.8 ±0.15
0.8 ±0.15
0.8 ±0.15
150 pF
0.6 ±0.15 0.6 ±0.15
0.85 ±0.15 0.85 ±0.15
0.85 ±0.15 0.85 ±0.15
180 pF
0.8 ±0.15
220 pF
330 pF
390 pF
470 pF
680 pF
1.0 nF
1.5 nF
2.2 nF
3.3 nF
4.7 nF
6.8 nF
10 nF
15 nF
1.25 ±0.2
18 nF
22 nF 0.85 ±0.15 0.85 ±0.15
27 nF
33 nF
1.25 ±0.2 1.25 ±0.2
47 nF
68 nF
100 nF
150 nF
220 nF
330 nF
470 nF
680 nF
1000 nF
2.2 µF
4.7 µF
10 µF
22 µF
47 µF
100 µF
Tape width 12 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
112
X7R - Soft termination, 1206
MLCC Selection Charts
X7R
Soft termination
Capaci-
tance 1206
16 V 25 V 50 V 100 V 250 V 500 V 630 V 1000 V 2000 V
100 pF
150 pF
180 pF
220 pF
0.85 ±0.15 0.85 ±0.15
0.85 ±0.15
0.85 ±0.15
0.85 ±0.15 1.25 ±0.2 1.25 ±0.2
1.25 ±0.2
1.25 ±0.2
330 pF
390 pF
470 pF
680 pF
1.0 nF
1.5 nF
2.2 nF
3.3 nF
4.7 nF
6.8 nF
10 nF
15 nF
18 nF
22 nF 1.25 ±0.2
27 nF
33 nF
47 nF
68 nF
1.25 ±0.2
100 nF
150 nF
1.15 ±0.2
220 nF
330 nF 1.15 ±0.2 1.6 ±0.2
470 nF
1.15 ±0.2680 nF
1000 nF
2.2 µF
4.7 µF
10 µF
22 µF
47 µF
100 µF
Tape
width 12 mm
Note: Values in shaded cells indicate thickness class (unit: mm)
113
X7R - Soft termination, 1210/ 1812
MLCC Selection Charts
X7R
Soft termination
Capaci-
tance 1210 1812
16 V 25 V 50 V 100 V 250 V 50 V 100 V 250 V 500 V 630 V
100 pF
150 pF
180 pF
220 pF
330 pF
390 pF
470 pF
680 pF
1.0 nF
1.5 nF
0.85 ±0.15 0.85 ±0.15
0.85 ±0.15 0.85 ±0.15 0.85 ±0.15
2.2 nF
3.3 nF
0.85 ±0.15 0.85 ±0.15
1.6 ±0.2
1.25 ±0.2
1.25 ±0.24.7 nF
6.8 nF
10 nF
15 nF
18 nF
22 nF
1.25 ±0.2
27 nF
33 nF
1.25 ±0.2 1.25 ±0.2
1.6 ±0.2
47 nF 1.15 ±0.2 1.25 ±0.2 1.25 ±0.2
68 nF 1.6 ±0.2
100 nF
150 nF 1.15 ±0.2 1.15 ±0.2
1.6 ±0.2
1.6 ±0.2
220 nF
330 nF
470 nF
680 nF
1000 nF
2.2 µF
4.7 µF
10 µF
22 µF
47 µF
100 µF
Tape
width 12mm
Note: Values in shaded cells indicate thickness class (unit: mm)
114
X5R - General purpose & High capacitance, 01005 to 1812
MLCC Selection Charts
Temperature characteristic Construction
Case dimensions
Discrete capacitors - General purpose & High capacitance
L2L3
L4
L1
W
Case size designation Dimensions in mm
Inch-based Metric L1W L2/L3 min L2/L3 max L4 min
01005 0402M 0.4±0.02 0.2±0.02 0.07 0.14 0.14
0201 0603M 0.6 ±0.03 (1) 0.3 ±0.03 (1) 0.10 0.20 0.20
0.6 ±0.05 (2) 0.3 ±0.05 (2) 0.10 0.20 0.20
0402 1005M 1.0 ±0.05 (1) 0.5 ±0.05 (1) 0.15 0.30 0.40
1.0 ±0.20 (2) 0.5 ±0.20 (2) 0.15 0.30 0.40
0603 1608M 1.6 ±0.10 (1) 0.8 ±0.10 (1) 0.20 0.60 0.40
1.6 ±0.20 (2) 0.8 ±0.20 (2) 0.20 0.60 0.40
0805 2012M 2.0 ±0.10 (1) 1.25 ±0.10 (1) 0.25 0.75 0.55
2.0 ±0.20 (2) 1.25 ±0.20 (2) 0.25 0.75 0.55
1206 3216M 3.2 ±0.15 (1) 1.6 ±0.15 (1) 0.25 0.75 1.40
3.2 ±0.30 (2) 1.6 ±0.20 (2) 0.25 0.75 1.40</