47642-001 Prod Spec Datasheet by Molex

View All Related Products | Download PDF Datasheet
; molex’ C PS-47642-001 TABLE OF CONTENTS REVISION. ECR/ECN INFORMATION. TITLE. SHEET N0. EC No. DATE. DOCUMENT NUMBER. CREATED / REVISED BY. CHECKED BY. APPROVED BY.
PRODUCT SPECIFICATION
REVISION:
ECR/ECN INFORMATION:
TITLE:
MICRO-USB CONNECTORS
SHEET No.
G
EC No:
SH2015-0018
1 of 7
DATE:
2014/07/10
DOCUMENT NUMBER:
CHECKED BY:
APPROVED BY:
PS-47642-001
-001
XQZHANG
XQZHANG
AYIN
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC
TITLE :
UNIVERSAL SERIAL BUS
MICRO USB CONNECTORS
TABLE OF CONTENTS
1.0 SCOPE
2.0 PRODUCT DESCRIPTION
2.1 DESIGN AND CONSTRUCTION
2.2 MATERIAL AND PLATING
3.0 APPLICABLE DOCUMENTS
3.1 RATING
3.2 PERFORMANCE AND TEST DESCRIPTION
3.3 TEST REQUIREMENTS AND PROCEDURES
4.0 TEST SEQUENCE
5.0 REFLOW CONDITION
6.0 PACKAGING
; molex’ C REVISION. ECR/ECN INFORMATION. TTTLE. SHEET N0. EC No. DATE. DOCUMENT NUMBER. CREATED / REVTSED BY. CHECKED BY. APPROVED BY. PS-47642-001
PRODUCT SPECIFICATION
REVISION:
ECR/ECN INFORMATION:
TITLE:
MICRO-USB CONNECTORS
SHEET No.
G
EC No:
SH2015-0018
2 of 7
DATE:
2014/07/10
DOCUMENT NUMBER:
CHECKED BY:
APPROVED BY:
PS-47642-001
-001
XQZHANG
XQZHANG
AYIN
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC
1.0 SCOPE
This product specification defines the mechanical, electrical and environmental performance
requirements and test methods for Micro-USB connector series products.
2.0 PRODUCT DESCRIPTION
2.1 Design and Construction
Construction and physical dimensions shall be specified on the applicable sales drawing.
Connector consists of a metal shell, a plastic housing, and 5 terminals.
Solder components shall meet Lead-Free soldering requirements and the connectors shall
be RoHS Compliant.
2.2 Materials and Plating
Refer to respective Molex sales drawings for information on materials, plating and marking.
3.0 APPLICABLE DOCUMENTS
In the event of conflict between the requirements of this specification and the sales
drawing, the sales drawing shall take precedence. In the event of conflict between the
requirements of the specification and the referenced documents, this specification shall take
precedence.
EIA-STANDARD-364: ELECTRICAL CONNECTOR/SOCKET TEST PROCEDURES
INCLUDING ENVIRONMENTAL CLASSIFICATIONS
3.1 Rating
Item
Standard
Rated Voltage (Max.)
30V AC (rms)
Rated Current (Max.)
Signal (Pins 2,3,4): 1.0A*1
Power (Pins 1,5): 1.8 A
Operating Temperature Range
-30°C ~ +85°C (Including Terminal Temperature Rise)
Shipping and Storage Temperature
Range
-40°C ~ +85°C
Ambient Temperature (Ta):
25°C ± 2°C
*1: Test with power pins, the rated current of signal pins should be 0.5A.
3.2 Performance and Test Description
The connectors shall be designed to meet the electrical, mechanical and environmental
performance requirements specified in Para. 3.3
; molex’ C PS-47642-001 V nce 0H2 e as as REVISION. ECR/ECN INFORMATION. TTTLE. SHEET Nu. EC No. DATE. DOCUMENT NUMBER. CREATED / REVTSED BY. CHECKED BY. APPROVED BY.
PRODUCT SPECIFICATION
REVISION:
ECR/ECN INFORMATION:
TITLE:
MICRO-USB CONNECTORS
SHEET No.
G
EC No:
SH2015-0018
3 of 7
DATE:
2014/07/10
DOCUMENT NUMBER:
CHECKED BY:
APPROVED BY:
PS-47642-001
-001
XQZHANG
XQZHANG
AYIN
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC
3.3 Test Requirements and Procedures
3.3.1 Electrical Performances
Item
Requirement
Test Condition
Low Level
Contact Resistance
(initial)
30mΩ Max.
Mated plugs, measure by dry circuit, 20mV
DC maximum, open circuit 100mA
maximum. Except wire conductor
resistance.
EIA-364-23
Insulation Resistance
(initial)
1000MΩ Min.
Mated plugs, apply 100V DC for 1 minute
between adjacent terminal or ground.
EIA-364-21
Dielectric
Withstanding Voltage
No Breakdown
Mated plugs, apply 100V AC (rms) at 60Hz
for 1 minute between adjacent terminal or
ground.
EIA-364-20
Temperature Rise
30oC Max.
Mated plugs and measure the temperature
rise of contact when the maximum DC
rated current is passed
EIA-364-70
Contact Capacitance
2pF Max.
Measured between adjacent circuits of un-
mated connectors at 1kHz.
EIA-364-30
3.3.2 Mechanical Performances
Item
Requirement
Test Condition
Mating / un-
mating force
(initial)
Mating force
35N (3.57kgf)
Max.
Mating / un-mating at a rate of 12.5mm
per minute.
EIA-364-13
Un-mating force
8N (0.82kgf) Min.
25N (2.58kgf)
Max.
Durability
Contact
Resistance
ΔR = 10mΩ
Max.
Mated / un-mated up to 10,000 cycles
repeatedly at maximum rate of 500
cycles per hour. (When manually
operated, mating speed should be below
200 cycles per hour.)
EIA-364-09
Mating force
35N (3.57kgf)
Max.
Un-mating force
8N (0.82kgf) Min.
25N (2.58kgf)
Max.
Appearance
No breakdown
; molex’ C REVISION. ECR/ECN INFORMATION. TTTLE. SHEET N0. EC No. DATE. DOCUMENT NUMBER. CREATED / REVTSED BY. CHECKED BY. APPROVED BY. PS-47642-001
PRODUCT SPECIFICATION
REVISION:
ECR/ECN INFORMATION:
TITLE:
MICRO-USB CONNECTORS
SHEET No.
G
EC No:
SH2015-0018
4 of 7
DATE:
2014/07/10
DOCUMENT NUMBER:
CHECKED BY:
APPROVED BY:
PS-47642-001
-001
XQZHANG
XQZHANG
AYIN
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC
3.3.3 Environmental Performances
Item
Requirement
Test Condition
Vibration
Appearance
No Damage
Mate plugs and subject to the
following vibration conditions:
Random Vibration
3 mutually perpendicularly.
10~2000Hz, 0.02G2/Hz
20 minutes per plane
EIA-364-28
Contact
Resistance
ΔR =10mΩ
Max.
Discontinuity
1 microsecond
Max.
Mechanical
Shock
Appearance
No damage
Mate plugs and subject to the
following shock conditions, 3
shocks shall be applied along 3
mutually perpendicular axes,
passing DC 100mA current during
the test. (Total of 18 shocks)
Test Pulse : Half Sine
Peak Value: 30G
Duration: 11 ms
EIA-364-27
Contact
Resistance
ΔR =10mΩ
Max.
Discontinuity
1 Microsecond
Max.
Temperature Life
(Heat
Resistance)
Appearance
No damage
Mate plugs and expose to 105±2°C
for 250 hours, Upon completion of
the exposure period, the test
specimens shall be conditioned at
ambient room conditions for 1 to 2
hours, after which the specified
measurements shall be performed
EIA-364-17B
Contact
Resistance
ΔR =10mΩ
Max.
Insulation
Resistance
100 MΩ Min.
Dielectric Strength
No Breakdown
Cyclic Humidity
Appearance
There shall be no
remarkable
corrosion
Mate connectors and expose to
humidity in 7 cycles 7 clause. Upon
completion of the exposure period,
the test specimens shall be
conditioned at ambient room
conditions for 1 to 2 hours, after
which the specified measurements
shall be performed.
EIA-364-31 method III
Contact
Resistance
ΔR =10mΩ
Max.
Dielectric Strength
No breakdown
Insulation
Resistance
100 MΩ Min.
; molex’ C PS-47642-001 d REVISION. ECR/ECN INFORMATION. TTTLE. SHEET N0. EC No. DATE. DOCUMENT NUMBER. CREATED / REVTSED BY. CHECKED BY. APPROVED BY.
PRODUCT SPECIFICATION
REVISION:
ECR/ECN INFORMATION:
TITLE:
MICRO-USB CONNECTORS
SHEET No.
G
EC No:
SH2015-0018
5 of 7
DATE:
2014/07/10
DOCUMENT NUMBER:
CHECKED BY:
APPROVED BY:
PS-47642-001
-001
XQZHANG
XQZHANG
AYIN
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC
Item
Requirement
Test Condition
Thermal shock
(Temperature
cycling)
Appearance
No Damage
Mate plugs and subject to the
flowing conditions for 10 cycles,
Upon completion of the exposure
period, the test specimens shall be
conditioned at ambient room
conditions for 1 to 2 hours, after
which the specified measurements
shall be performed.
1 cycle
a) -55 ± 3°C 30 minutes.
b) +85 ± 2°C 30 minutes.
EIA-364-32C
Contact resistance
ΔR =10mΩ
Max.
Dielectric Strength
No breakdown
Insulation
Resistance
100 MΩ Min.
Salt spray
Appearance
By visual
inspection without
noticeable rust.
Mate plugs and expose to the
following salt mist conditions. Upon
completion of the exposure period,
salt deposits shall be removed by a
gentle wash or dip in running water,
after which the specified
measurements shall be performed.
NaCl solution
Concentration: 5 ± 1%
Spray time: 48 ± 4 hours
Ambient Temperature: 35 ± 2°C
EIA-364-26
Contact
Resistance
ΔR =10mΩ Max.
Solder-ability (not
for black nickel
plating)
Solder Wetting
95% of immersed
area must show no
voids or pin holes
Dip solder-tails in flux then
immerse in solder bath at 245 ±
5°C up to 0.5mm from the bottom
of the housing for 4 ~ 5 seconds
(EIA-364-52 Category 2)
Resistance to
soldering heat
Without any deformation of case or
excessive looseness of the terminals
(pins).
Electrical characteristics shall be
satisfied.
For procedures other than specified
below, refer to IEC PUB. 68-2-20.
Test Tb Method 1A or 2
Solder bath method
Solder temperature: 255 +5/-0°C
Immersion time: 10 ± 1 second
Thickness of PCB: 0.8 mm
Solder iron method
Solder temperature: 350 ± 10°C
Immersion time: 3 ± 1 second
However, excessive pressure shall
not be applied to the terminal
Reference reflow condition at Para.
5.0
No any damage after reflow
; molex’ C REVISION. ECR/ECN INFORMATION. TTTLE. SHEET N0. EC No. DATE. DOCUMENT NUMBER. CREATED / REVTSED BY. CHECKED BY. APPROVED BY. PS-47642-001
PRODUCT SPECIFICATION
REVISION:
ECR/ECN INFORMATION:
TITLE:
MICRO-USB CONNECTORS
SHEET No.
G
EC No:
SH2015-0018
6 of 7
DATE:
2014/07/10
DOCUMENT NUMBER:
CHECKED BY:
APPROVED BY:
PS-47642-001
-001
XQZHANG
XQZHANG
AYIN
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC
4.0 TEST SEQUENCE
All samples have to be soldered on PCB and reflow twice before measuring and testing.
Item
A
B
C
D
E
F
G
H
1
Contact
Resistance
1, 4
2, 5
1, 7
1, 3
1, 3
2
Insulation
Resistance
3, 8
3
Dielectric
Strength
4, 9
4
Contact
capacitance
2
5
Durability
3
6
Vibration
3
7
Mechanical
Shock
2
8
Temperature
Life
2
9
Humidity
6
10
Thermal
shock
5
11
Salt spray
2
12
Temperature
Rise
1
13
Mating / un-
mating force
1, 4
14
Solder-ability
1
15
Resistance
to soldering
heat
1
Number of
sample
5
5
5
5
5
5
5
5
; molex’ C TEMPERATURE CONDITION GRAPH REVISION. ECR/ECN INFORMATION. TITLE. SHEET Nu. EC No. DATE. DOCUMENT NUMBER. CREATED / REVISED BY. CHECKED BY. APPROVED BY. PS-47642-001
PRODUCT SPECIFICATION
REVISION:
ECR/ECN INFORMATION:
TITLE:
MICRO-USB CONNECTORS
SHEET No.
G
EC No:
SH2015-0018
7 of 7
DATE:
2014/07/10
DOCUMENT NUMBER:
CHECKED BY:
APPROVED BY:
PS-47642-001
-001
XQZHANG
XQZHANG
AYIN
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC
5.0 REFLOW CONDITION
TEMPERATURE CONDITION GRAPH
6.0 PACKAGING
Parts shall be packaged to protect against damage during handling, transit and storage.
Receptacles will be supplied in tape and reel.
Temp.(°C )
Time (sec)
150
217
255+5/-0°C Peak temp.
10 sec maximum
Slope < 3°
C/sec.
Slope < 3°C/sec
Soak time
60-180 sec
Time above
liquids
60-120 sec
Not to scale, for reference only

Products related to this Datasheet

CONN RCPT USB2.0 MICRO B SMD
CONN RCPT MICRO USB B 5POS SMD
CONN RCPT MICRO USB B 5POS SMD
CONN RCPT USB2.0 MICRO B SMD
CONN RCPT MICRO USB B 5POS SMD
CONN RCPT MICRO USB B 5POS SMD
CONN RCPT USB2.0 MICRO B SMD