9286 Series Catalog Datasheet by AVX Corporation

View All Related Products | Download PDF Datasheet
/A\V/) ( A KYOCERA GROUP COMPANY
Wire-to-Wire Connectors
091420-1
/.‘.\V/)I(' Ammcmw comm [AVDK |
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
IMPORTANT INFORMATION/DISCLAIMER
All product specifications, statements, information and data (collectively, the “Information”) in this datasheet or
made available on the website are subject to change. The customer is responsible for checking and verifying
the extent to which the Information contained in this publication is applicable to an order at the time the order is
placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee,
warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on AVX’s knowledge of typical operating conditions
for such applications, but are not intended to constitute and AVX specifically disclaims any warranty concerning
suitability for a specific customer application or use.
ANY USE OF PRODUCT OUTSIDE OF SPECIFICATIONS OR ANY STORAGE OR INSTALLATION
INCONSISTENT WITH PRODUCT GUIDANCE VOIDS ANY WARRANTY.
The Information is intended for use only by customers who have the requisite experience and capability to
determine the correct products for their application. Any technical advice inferred from this Information or
otherwise provided by AVX with reference to the use of AVX’s products is given without regard, and AVX
assumes no obligation or liability for the advice given or results obtained.
Although AVX designs and manufactures its products to the most stringent quality and safety standards, given
the current state of the art, isolated component failures may still occur. Accordingly, customer applications
which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as
installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component
does not result in a risk of personal injury or property damage.
Unless specifically agreed to in writing, AVX has not tested or certified its products, services or
deliverables for use in high risk applications including medical life support, medical device, direct physical
patient contact, water treatment, nuclear facilities, weapon systems, mass and air transportation control,
flammable environments, or any other potentially life critical uses. Customer understands and agrees
that AVX makes no assurances that the products, services or deliverables are suitable for any high-risk
uses. Under no circumstances does AVX warrant or guarantee suitability for any customer design or
manufacturing process.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume
that all safety measures are indicted or that other measures may not be required.
121319
”M A man snow c
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
THRU-WIRE CONNECTORS 18-26 AWG: 00-9286
General Information ..........................................................................................................................................................................................................1
1 Position .........................................................................................................................................................................................................................2
2 Position .........................................................................................................................................................................................................................3
3 Position .........................................................................................................................................................................................................................4
4 Position .........................................................................................................................................................................................................................5
6 Position .........................................................................................................................................................................................................................6
8 Position .........................................................................................................................................................................................................................7
JUNCTION BOX CONNECTORS 18-26 AWG: 00-9286
General Information ..........................................................................................................................................................................................................8
4 Position .........................................................................................................................................................................................................................9
6 Position .......................................................................................................................................................................................................................10
8 Position .......................................................................................................................................................................................................................11
WIRE INSERTION/REMOVAL PROCESS ..............................................................................................................................................................12
ADHESIVE MOUNTING TAPE .................................................................................................................................................................................. 13
REDUCED THRU WIRE CONNECTOR 18-24 AWG: 9286-200
General Information ........................................................................................................................................................................................................14
Wire Trim ........................................................................................................................................................................................................................16
REDUCED JUNCTION BOX CONNECTORS 18-24 AWG: 9286-250 ...............................................................................................................17
General Information ........................................................................................................................................................................................................17
THRU WIRE CONNECTOR 12-18 AWG: WTW - 9286-300
Genreal Information ........................................................................................................................................................................................................20
Wire-to-Wire Connectors
NOTICE: Specifications are subject to change without notice. Contact your nearest AVX Sales Office for the latest specifications. All statements, information
and data given herein are believed to be accurate and reliable, but are presented without guarantee, warranty, or responsibility of any kind, expressed or
implied. Statements or suggestions concerning possible use of our products are made without representation or warranty that any such use is free of patent
infringement and are not recommendations to infringe any patent. The user should not assume that all safety measures are indicated or that other measures
may not be required. Specifications are typical and may not apply to all applications.
Table of Contents
/A\V/l;§ mom snow c ITT T o_. _' a} RDHS
1
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
Poke-Home
Thru-Wire Connectors 18-26 AWG: 00-9286
General Information
00 9286 00X 021 906
Prefix Series Number of Ways Wire Size Color Options
9 = UL White
Plating
Option
06 = Pure Tin
all over
APPLICATIONS FEATURES AND BENEFITS
ELECTRICAL ENVIRONMENTAL MECHANICAL
Wire-to-Wire connectors have been used in the industrial market for years with traditional 2-Piece (plug
and socket) connector systems which require crimp and poke wire terminations to connect electrical
or electronic components. In the general wiring market (2-3 wires) there are a number of connector
styles available, however, they are limited in sizes, expanded wire gauges and the ability to reuse them
when repair or replacement is needed. Based on the existing success of “Poke-Home” wire-to-board
connectors, AVX has developed a new family of wire-to-wire connectors to meet the cost, flexibility and
ease-of-use targets in industrial wiring applications.
The 9286 series of Thru-Wire connectors provides a high spring force Beryllium Copper contact system
that uses simple push button activation to insert and remove individual stripped wires in the connection
process. There is a forward and aft shrouded (to prevent accidental activation) push button for each wire
connection that can be operated individually or simultaneously with a simple plastic tool or ball point
pen tip. Up to eight wires can be electrically connected in a single connector body which will support any
combination of wire gauges from 18AWG up to 26 AWG. Wires can be removed or replaced up to 5 times
so there is no need to replace the connector in a new installation.
HOW TO ORDER
Industrial/Machine Control; motors, solenoids,
PLC’s, pumps, valves, sensors, fans…
Commercial/Building; fixtures, fire, security,
surveillance, blinds, sensors, controls…
Commercial/Industrial LED; retail, office,
manufacturing, signage, displays…
Application notes; refer to 201-01-135
Current Rating: 8 Amps / Contact
Voltage Rating: 300 VAC
Operating Temperature:
-40ºC to +125ºC
Insulator Material: Glass-Filled Nylon 46;
UL94V0
Contact Material: Beryllium Copper /
Phosphor Bronze
Plating: Tin over Nickel
Replacibility: 5 Cycles
High spring force top contact provides a lance type retention to capture and retain
the wire
Shrouded dual push button activation for easy wire insertion/removal
Accepts 18-26AWG Solid and Stranded wires; any combination
Expanded size offering to maximize application potential; 1, 2, 3, 4, 6 & 8 positions
Optional mounting tape to secure in panel mounting applications
Molded in position numbers and schematic for easy identification
Code No of
Ways Details
001 1 Page 3
002 2 Page 4
003 3 Page 5
004 4 Page 6
006 6 Page 7
008 8 Page 8
Code Wire
Gauge
Max
Conductor
Max
Insulation
021 18 to 26
AWG
1.05mm
Diameter
2.10mm
Diameter
Certification: UL File #E90723
121319
/A\V/X(® A KVOCERA emu; cowmw 1: NOTE 3 '2 fNOTE 3 Inu moo m < a="" vi="" *v="" \="" :iqjlm:="" note="" sj="" o="" a0="">
2The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
18-26 AWG 1 WAY POKE-HOME THRU WIRE
SECTION ON A-A
PACKING DETAILS
Pack 400 pieces in a clear plastic bag.
NOTES:
1. 1 WAY WIRE TO WIRE “POKE-HOME” CONNECTOR, BUTTON OPERATED.
2. WIRE SIZES 18-26 AWG, MAXIMUM INSULATION DIAMETER 2.10MM.
3. SPLIT BUTTON ALLOWS THE WIRES TO BE INSERTED/WITHDRAWN INDEPENDENTLY.
4. INSULATION MATERIAL: NYLON 46, GLASS FILLED, UL94 V-0. COLOR SEE PAGE 2.
5. CONTACT MATERIAL: TIN PLATED COPPER ALLOY.
6. FOR FULL SPECIFICATION REFER TO ELCO SPECIFICATION 201-01-132.
FOR APPLICATION NOTES REFER TO ELCO SPECIFICATION 201-01-135.
7. GENERAL TOLERANCE ±0.20MM.
8. WIRE STRIP LENGTH GUIDE, SEE PAGE 13.
9. ADHESIVE STRIP FOR PANEL MOUNTING REFER TO PAGE 14.
10. FOR UL PRODUCT CODES UL REFERENCE E90723 (US AND CANADA).
Poke-Home
Thru-Wire Connectors 18-26 AWG: 00-9286
1 Position
SECTION ON A-A
121319
/A\V/X(® A KVOCERA emu; cowmw NOTE 3 *flr El @313 Ex is at; aflagZa 2;“: € C3). AVX 9286 & THIRU-WIIIRE o— 1‘ NOTE 54 WAX |
3
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
18-26 AWG 2 WAY POKE-HOME THRU WIRE
SECTION ON A-A
PACKING DETAILS
Pack 400 pieces in a clear plastic bag.
NOTES:
1. 2 WAY WIRE TO WIRE “POKE-HOME” CONNECTOR, BUTTON OPERATED.
2. WIRE SIZES 18-26 AWG, MAXIMUM INSULATION DIAMETER 2.10MM.
3. SPLIT BUTTON ALLOWS THE WIRES TO BE INSERTED/WITHDRAWN
INDEPENDENTLY.
4. INSULATION MATERIAL: NYLON 46, GLASS FILLED, UL94 V-0. COLOR SEE PAGE 2.
5. CONTACT MATERIAL: TIN PLATED COPPER ALLOY.
6. FOR FULL SPECIFICATION REFER TO ELCO SPECIFICATION 201-01-132.
FOR APPLICATION NOTES REFER TO ELCO SPECIFICATION 201-01-135.
7. GENERAL TOLERANCE ±0.20MM.
8. WIRE STRIP LENGTH GUIDE, SEE PAGE 13.
9. ADHESIVE STRIP FOR PANEL MOUNTING REFER TO PAGE 14.
10. FOR UL PRODUCT CODES UL REFERENCE E90723 (US AND CANADA).
Poke-Home
Thru-Wire Connectors 18-26 AWG: 00-9286
2 Position
121319
y @ /‘\'/) ( n A A mam ems cowANv aIa§2a§3a W A U mi 3 H—H % g; Avx 9286 % TlHRU-WIIRE E /e‘s\Y/ll( |
4The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
18-26 AWG 3 WAY POKE-HOME THRU WIRE
SECTION ON A-A
PACKING DETAILS
Pack 400 pieces in a clear plastic bag.
NOTES:
1. 3 WAY WIRE TO WIRE “POKE-HOME” CONNECTOR, BUTTON OPERATED.
2. WIRE SIZES 18-26 AWG, MAXIMUM INSULATION DIAMETER 2.10MM.
3. SPLIT BUTTON ALLOWS THE WIRES TO BE INSERTED/WITHDRAWN INDEPENDENTLY.
4. INSULATION MATERIAL: NYLON 46, GLASS FILLED, UL94 V-0. COLOR SEE PAGE 2.
5. CONTACT MATERIAL: TIN PLATED COPPER ALLOY.
6. FOR FULL SPECIFICATION REFER TO ELCO SPECIFICATION 201-01-132.
FOR APPLICATION NOTES REFER TO ELCO SPECIFICATION 201-01-135.
7. GENERAL TOLERANCE ±0.20MM.
8. WIRE STRIP LENGTH GUIDE, SEE PAGE 13.
9. ADHESIVE STRIP FOR PANEL MOUNTING REFER TO PAGE 14.
10. FOR UL PRODUCT CODES UL REFERENCE E90723 (US AND CANADA).
Poke-Home
Thru-Wire Connectors 18-26 AWG: 00-9286
3 Position
121319
y e /‘\'/) ( n A A mam ems cowANv H) M 515525535545 _ 551 mg 515525535545 NOTE 3 [WE 3 jum E— %x 3 gig H—M—HWW KAN/AN (AN g; U U U “.Avxezesl _ THIRU—WIIRE H l i A “-7 NDTE a /e‘s\Y/ll( |
5
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
18-26 AWG 4 WAY POKE-HOME THRU WIRE
SECTION ON A-A
PACKING DETAILS
Pack 400 pieces in a clear plastic bag.
NOTES:
1. 4 WAY WIRE TO WIRE “POKE-HOME” CONNECTOR, BUTTON OPERATED.
2. WIRE SIZES 18-26 AWG, MAXIMUM INSULATION DIAMETER 2.10MM.
3. SPLIT BUTTON ALLOWS THE WIRES TO BE INSERTED/WITHDRAWN INDEPENDENTLY.
4. INSULATION MATERIAL: NYLON 46, GLASS FILLED, UL94 V-0. COLOR SEE PAGE 2.
5. CONTACT MATERIAL: TIN PLATED COPPER ALLOY.
6. FOR FULL SPECIFICATION REFER TO ELCO SPECIFICATION 201-01-132.
FOR APPLICATION NOTES REFER TO ELCO SPECIFICATION 201-01-135.
7. GENERAL TOLERANCE ±0.20MM.
8. WIRE STRIP LENGTH GUIDE, SEE PAGE 13.
9. ADHESIVE STRIP FOR PANEL MOUNTING REFER TO PAGE 14.
10. FOR UL PRODUCT CODES UL REFERENCE E90723 (US AND CANADA).
Poke-Home
Thru-Wire Connectors 18-26 AWG: 00-9286
4 Position
121319
(8 PAW V A /‘\'/) fl EflEEZEE3ag4-EESEE6E UUU UU WH—HH—HWWW % g,» isif /e‘s\Y/ll( |
6The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
18-26 AWG 6 WAY POKE-HOME THRU WIRE
SECTION ON A-A
PACKING DETAILS
Pack 400 pieces in a clear plastic bag.
NOTES:
1. 6 WAY WIRE TO WIRE “POKE-HOME” CONNECTOR, BUTTON OPERATED.
2. WIRE SIZES 18-26 AWG, MAXIMUM INSULATION DIAMETER 2.10MM.
3. SPLIT BUTTON ALLOWS THE WIRES TO BE INSERTED/WITHDRAWN INDEPENDENTLY.
4. INSULATION MATERIAL: NYLON 46, GLASS FILLED, UL94 V-0. COLOR SEE PAGE 2.
5. CONTACT MATERIAL: TIN PLATED COPPER ALLOY.
6. FOR FULL SPECIFICATION REFER TO ELCO SPECIFICATION 201-01-132.
FOR APPLICATION NOTES REFER TO ELCO SPECIFICATION 201-01-135.
7. GENERAL TOLERANCE ±0.20MM.
8. WIRE STRIP LENGTH GUIDE, SEE PAGE 13.
9. ADHESIVE STRIP FOR PANEL MOUNTING REFER TO PAGE 14.
10. FOR UL PRODUCT CODES UL REFERENCE E90723 (US AND CANADA).
Poke-Home
Thru-Wire Connectors 18-26 AWG: 00-9286
6 Position
121319
EJ EH. 3 @IEMEE EHEEZEE3254EESEEEEE7EE8E 2 2 NOTE 2 H NM NM NM NM NM NM \NH A h U u fl‘ £3 AVQK |
7
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
18-26 AWG 8 WAY POKE-HOME THRU WIRE
SECTION ON A-A
PACKING DETAILS
Pack 400 pieces in a clear plastic bag.
NOTES:
1. 8 WAY WIRE TO WIRE “POKE-HOME” CONNECTOR, BUTTON OPERATED.
2. WIRE SIZES 18-26 AWG, MAXIMUM INSULATION DIAMETER 2.10MM.
3. SPLIT BUTTON ALLOWS THE WIRES TO BE INSERTED/WITHDRAWN INDEPENDENTLY.
4. INSULATION MATERIAL: NYLON 46, GLASS FILLED, UL94 V-0. COLOR SEE PAGE 2.
5. CONTACT MATERIAL: TIN PLATED COPPER ALLOY.
6. FOR FULL SPECIFICATION REFER TO ELCO SPECIFICATION 201-01-132.
FOR APPLICATION NOTES REFER TO ELCO SPECIFICATION 201-01-135.
7. GENERAL TOLERANCE ±0.20MM.
8. WIRE STRIP LENGTH GUIDE, SEE PAGE 13.
9. ADHESIVE STRIP FOR PANEL MOUNTING REFER TO PAGE 14.
10. FOR UL PRODUCT CODES UL REFERENCE E90723 (US AND CANADA).
Poke-Home
Thru-Wire Connectors 18-26 AWG: 00-9286
8 Position
121319
y @ /‘\'/) ( n A macaw GRochoMPANv I
8The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
Poke-Home
Junction Box Connectors 18-26 AWG: 00-9286
General Information
00 9286 00X 121 906
Prefix Series Number of Ways Wire Size Color Options
9 = UL Red
Plating Option
06 = Tin all over
APPLICATIONS FEATURES AND BENEFITS
ELECTRICAL ENVIRONMENTAL MECHANICAL
Wire-to-Wire connectors have been used in the industrial market for years with traditional 2-Piece (plug
and socket) connector systems which require crimp and poke wire terminations to connect electrical or
electronic components. In the general wiring market (2-3 wires) there are a number of connector styles
available, however, they are limited in sizes, expanded wire gauges and the ability to reuse them when repair
or replacement is needed. Based on the existing success of “Poke-Home” wire-to-board connectors, AVX
has developed a new family of wire-to-wire connectors to meet the cost, flexibility and ease-of-use targets in
industrial wiring applications.
The 9286 series of Junction Box connectors provide a high spring force Beryllium Copper contact system that
uses simple push button activation to insert and remove individual stripped wires in the connection process.
There is a forward and aft shrouded (to prevent accidental activation) push button for each wire connection that
can be operated individually or simultaneously with a simple plastic tool or ball point pen tip. This connector
family has been designed to bring a single wire in and then have multiple output (bus structure) wires of the same
power or signal. Four, Six or Eight wires can be electrically connected together in a single connector body which
will support any combination of wire gauges from 18AWG up to 26 AWG. Wires can be removed or replaced up
to 5 times so there is no need to replace the connector in a new installation.
HOW TO ORDER
Industrial/Machine Control; motors, solenoids,
PLC’s, pumps, valves, sensors, fans…
Commercial/Building; fixtures, fire, security,
surveillance, blinds, sensors, controls…
Commercial/Industrial LED; retail, office,
manufacturing, signage, displays…
Application notes; refer to 201-01-135
Current Rating: 10 Amps total
Voltage Rating: 300v AC
Operating Temperature:
-40ºC to +125ºC
Insulator Material: Glass-Filled Nylon 46;
UL94V0
Contact Material: Beryllium Copper /
Phosphor Bronze
Plating: Tin over Nickel
Replacibility: 5 Cycles
High spring force top contact provides a lance type retention to capture and retain
the wire
Shrouded dual push button activation for easy wire insertion/removal
Accepts 18-26AWG Solid and Stranded wires; any combination
Expanded size offering to maximize application potential; 4, 6 or 8 positions
Optional mounting tape to secure in panel mounting applications
Molded in position numbers and schematic for easy identification
Code No of
Ways Details
004 4 Page 18
006 6 Page 19
008 8 Page 20
Code Wire
Gauge
Max
Conductor
Max
Insulation
121 18 to 26
AWG
1.05mm
Diameter
2.10mm
Diameter
Certification: UL File #E90723
121319
/A\V/X(® A KVOCERA emu; cowmw NOTE 3 JUNCTIDIN _ IDX E E 3E7 § E E 220 NOTE 7 W min—n «KW ~ wt? SAC ALVU
9
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
Poke-Home
Junction Box Connectors 18-26 AWG: 00-9286
4 Position
18-26 AWG 4 WAY POKE-HOME JUNCTION BOX
SECTION ON A-A
PACKING DETAILS
Pack 400 pieces in a clear plastic bag.
NOTES:
1. 4 WAY WIRE TO WIRE “POKE-HOME” CONNECTOR, BUTTON OPERATED. ALL
TERMINALS INTERCONNECTED.
2. WIRE SIZES 18-26 AWG, MAXIMUM INSULATION DIAMETER 2.10MM.
3. SPLIT BUTTON ALLOWS THE WIRES TO BE INSERTED/WITHDRAWN
INDEPENDENTLY.
4. INSULATION MATERIAL: NYLON 46, GLASS FILLED, UL94 V-0. COLOR SEE PAGE 17.
5. CONTACT MATERIAL: TIN PLATED COPPER ALLOY.
6. FOR FULL SPECIFICATION REFER TO ELCO SPECIFICATION 201-01-132.
FOR APPLICATION NOTES REFER TO ELCO SPECIFICATION 201-01-135.
7. GENERAL TOLERANCE ±0.20MM.
8. WIRE STRIP LENGTH GUIDE, SEE PAGE 21.
9. ADHESIVE STRIP FOR PANEL MOUNTING REFER TO PAGE 22.
10. FOR UL PRODUCT CODES UL REFERENCE E90723 (US AND CANADA).
121319
y @ /‘\'/) ( n A A mam ems comm \2 an EEEEEE T=T=fif / AOTE} I filefi/ I —JUNCTIIOIN IDX EEEEEE E— 1 IE); I?” n—M—nm W @@U 740 4,00 TW’ AVX 9286 n UNCTIIOIN BoxE L /e‘s\Y/ll( |
10 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
Poke-Home
Junction Box Connectors 18-26 AWG: 00-9286
6 Position
18-26 AWG 6 WAY POKE-HOME JUNCTION BOX
SECTION ON A-A
PACKING DETAILS
Pack 400 pieces in a clear plastic bag.
NOTES:
1. 6 WAY WIRE TO WIRE “POKE-HOME” CONNECTOR, BUTTON OPERATED. ALL TERMINALS
INTERCONNECTED.
2. WIRE SIZES 18-26 AWG, MAXIMUM INSULATION DIAMETER 2.10MM.
3. SPLIT BUTTON ALLOWS THE WIRES TO BE INSERTED/WITHDRAWN INDEPENDENTLY.
4. INSULATION MATERIAL: NYLON 46, GLASS FILLED, UL94 V-0. COLOR SEE PAGE 17.
5. CONTACT MATERIAL: TIN PLATED COPPER ALLOY.
6. FOR FULL SPECIFICATION REFER TO ELCO SPECIFICATION 201-01-132.
FOR APPLICATION NOTES REFER TO ELCO SPECIFICATION 201-01-135.
7. GENERAL TOLERANCE ±0.20MM.
8. WIRE STRIP LENGTH GUIDE, SEE PAGE 21.
9. ADHESIVE STRIP FOR PANEL MOUNTING REFER TO PAGE 22.
10. FOR UL PRODUCT CODES UL REFERENCE E90723 (US AND CANADA).
121319
y e /‘\'/) ( n A A mam ems comm we so AOTEK E Ea EE SE a 3Efl@@ E m fl 77W W W W 615°; E ‘4 o A ¢ HA‘ *P“ t? t? I ”If? *P AVX 9286 % JUNCTION BOX»— AVQK |
11
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
Poke-Home
Junction Box Connectors 18-26 AWG: 00-9286
8 Position
18-26 AWG 8 WAY POKE-HOME JUNCTION BOX
SECTION ON A-A
PACKING DETAILS
Pack 400 pieces in a clear plastic bag.
NOTES:
1. 8 WAY WIRE TO WIRE “POKE-HOME” CONNECTOR, BUTTON OPERATED. ALL TERMINALS
INTERCONNECTED.
2. WIRE SIZES 18-26 AWG, MAXIMUM INSULATION DIAMETER 2.10MM.
3. SPLIT BUTTON ALLOWS THE WIRES TO BE INSERTED/WITHDRAWN INDEPENDENTLY.
4. INSULATION MATERIAL: NYLON 46, GLASS FILLED, UL94 V-0. COLOR SEE PAGE 17.
5. CONTACT MATERIAL: TIN PLATED COPPER ALLOY.
6. FOR FULL SPECIFICATION REFER TO ELCO SPECIFICATION 201-01-132.
FOR APPLICATION NOTES REFER TO ELCO SPECIFICATION 201-01-135.
7. GENERAL TOLERANCE ±0.20MM.
8. WIRE STRIP LENGTH GUIDE, SEE PAGE 21.
9. ADHESIVE STRIP FOR PANEL MOUNTING REFER TO PAGE 22.
10. FOR UL PRODUCT CODES UL REFERENCE E90723 (US AND CANADA).
121319
y a /‘\'/) ( n A A mam ems comm f mi: 4 :01: 50 Am 2 END \ [MAX |
12 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
Poke-Home Junction Box:
Wire Insertion/Removal Process
00-9286
POKE-HOME BUTTON ACTIVATION TOOL
SINGLE BUTTON OPERATION
SIMULTANIOUS BUTTON OPERATION
TRIMMED WIRE
9286 BUTTON ACTIVATION TOOL
06-9286-7001-01-000
NOTES:
1. TOOL IS DOUBLE ENDED, END 1 ACTIVATES SINGLE BUTTON.
END 2 FOR SIMULTANEOUS BUTTON ACTIVATION.
2. WIRE WHEN TRIMMED TO BE STRAIGHT WITH NO BURRS.
3. FOR FULL ASSEMBLY DETAILS REFER TO APPLICATION NOTES 201-01-135.
4. SUPPLIED IN PACKS OF 100 PIECES.
121319
/A\V/)I(” A KVOCERA emu; commw m): quw w LENWE or an: w ‘ co /7=A{V\NL‘, ST'HP ON PEEL woo /e‘s\Y/>Z( |
13
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
Poke-Home – Junction Box:
Adhesive Mounting Tape
00-9286
08-9286-400X-00-000 ADHESIVE MOUNTING TAPE
ACCESSORY NOT SUPPLIED WITH CONNECTORS
NOTES:
1. DOUBLE SIDED FOAM FILLED ADHESIVE TAPE.
2. WIDTH FOR 1 WAY, 2 WAY, 3 WAY AND 6 WAY CONNECTORS, FOR LENGTH SEE TABLE.
3. USED FOR ADHERE A 9286 CONNECTOR TO A FLAT SURFACE.
4. SOME SURFACES MAY REQUIRE THE USE OF A CLEANING SOLVENT TO ACHIEVE BEST RESULTS.
5. SUPPLIED CUT TO SIZE ON A REEL ON AN OVERSIZE BACKING STRIP PARTS 400 PER REEL.
Part Number Dimension “A
Matching Connectors
00-9286-00X-021-X06
Thru Wire
00-9286-00X-121-X06
Junction Box
80-9286-4001-00-000 4.00 1 Way N/A
80-9286-4002-00-000 8.00 2 Way 4 Way
80-9286-4003-00-000 12.00 3 and 4 Way 6 and 8 Way
80-9286-4006-00-000 24.00 6 and 8 Way N/A
121319
, 8 AW) ( A T T 2—1 —| will! I
14 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
Reduced Thru Wire Connector
18-24 AWG: 9286-200
General Information
9286
Series
APPLICATIONS FEATURES AND BENEFITS
ELECTRICAL ENVIRONMENTAL MECHANICAL
Wire-to-Wire (WTW) connectors have been used in the industrial market for years with traditional 2-Piece
(plug & socket) connector systems. These require crimp and poke wire terminations to connect discrete
wires together. While these provide repeated pluggability and latching, they are often size and cost
prohibited in applications where the wires may only need to be replaced once or twice during their life.
The reduced 9286-200 series of thru wire connectors expands on the already proven 9286 poke-home
discrete WTW family of connectors, but in a smaller package size. The development of an active stainless
steel spring contact eliminates the need for push button activation to insert and remove wires which offers
a significant cost savings. The mechanical properties of this contact provide maximum wire retention
across a broad range of solid and stranded wire gauges, making this connector very versatile in field
installations.
HOW TO ORDER
CURRENT RATING
06
Plating Option
06 = Tin all over
Industrial Machine Controls; motors, drives, sole- noids,
sensors, fans, pumps, etc...
Commercial Buildings; controls, security, fire and sensors
Smart Grid; meters, breakers and panels
SSL/LED; fixtures, signage and streetlights
Application notes; refer to 201-01-17
Voltage Rating: 300 VAC
Current Rating: See matrix below
Operating Temperature:
-40ºC to +130ºC
Insulator Material: Glass-Filled Nylon 46; UL94V0
Fixed Contact Material: Copper Alloy
Flexing Contact: Stainless Steel
Fixed Contact Plating; Tin over Nickel
Durability: 5 Cycles
Simple strip and poke-home wire insertion with twist and pull wire extraction
High spring force stainless steel contact maximizes cost, strength and
flexibility
Accepts 18-24 AWG solid and stranded wires
Expanded size offering to cover multiple power and signal applications:
1p-6p
00X
Number of Ways
Code No of
POS. DIM. A
001 1 4.0/4.5
002 2 8.0/8.5
003 3 12.0/12.5
004 4 16.0/16.5
005 5 20.0/20.5
006 6 24.0/24.5
00
Prefix
Code Type Details
00 Poke
Home
Wire-
to-Wire
203
Wire Size
Code Wire Gauge Max
Insulation
203 18 - 24 AWG 2.10mm DIA.
X
Insulator Color
Code Housing
Color Availability
9White Standard
X
Internal Wire Stop
and UL Approval
Code Housing
Color
UL
Approved
0No Wire
Stop Yes
1With Wire
Stop Yes
UL File #E90723
Wire gauge Maximum approved current (amps)
UL (USA) UL (Canada)
18AWG 8 8
20AWG 6 4
22AWG 5 4
24AWG 3 2
121319
<2=d=> <=é=> <:=n.:(> 9836 WW7 E E65 <:n2> <:.@.:> /e‘s\Y/ll( |
15
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
NOTES:
1. WIRE-TO-WIRE POKE HOME CONNECTOR. AVAILABLE WITH
OR WITHOUT INTERNAL WIRE STOP
2. WIRE CONDUCTOR SIZES 18-24AWG (SOLID OR STRANDED).
MAXIMUM INSULATION 2.10MM DIAMETER.
3. HOUSING MATERIAL: GLASS-FILLED STANYL 46, UL94V-0.
COLOR PER P.N. CODE AT LEFT
4. FIXED CONTACT: TIN PLATED COPPER ALLOY.
5. FLEXING CONTACT: STAINLESS STEEL.
6. PACKAGING TO BE IN BULK; 1,000 PARTS PER BAG.
7. FOR FURTHER DETAILS, REFER TO SPECIFICATION 201-01-171
AND APPLICATION NOTES 201-01-172
8. UL APPROVED. UL REFERENCE E90723 (US AND CANADA)
Reduced Thru Wire Connector
18-24 AWG: 9686-200
2.2 TYP
BOTH ENDS
2.0
4.0
4.0 TYP
16.0
DIM. A
APPLICABLE, BOTH ENDS
5.0 REF MINIMUM WIRE
INSERTION, BOTH ENDS
BOTTOM VIEW
1 AND 6 POSITION PARTS
FOR REFERENCE
Code No of
POS. DIM. A
001 1 4.0/4.5
002 2 8.0/8.5
003 3 12.0/12.5
004 4 16.0/16.5
005 5 20.0/20.5
006 6 24.0/24.5
Wire Stripping Guidelines
Insulation Diameter Strip Length
<=2.10mm 4.0 ± 0.5
>2.10mm (NOTE 7) 7.0 ± 0.5
INSULATION
DIAMETER
STRIP LENGTH
121319
”M A man snow c m:
16 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
POKE HOME THRU WIRE
WIRE TRIM
REST POSITION OF CONTACT TIP
POKE HOME THRU WIRE
ASSEMBLY
Reduced Thru Wire Connector
18-24 AWG: 9686-200
Wire Trim
FOR FULL ASSEMBLY DETAILS REFER TO APPLICATION NOTE 201-01-172
Insulation Diameter Wire Trim Length X
Up to 2.10 Diameter 4.00 ± 0.50
Above 2.10mm Diameter
See Application Notes
201-01-172
7.00 ± 0.50
121319
y m n A macaw eRochoMPANv
17
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
Reduced Junction Box Connectors
18-24 AWG: 9286-250
General Information
9286
Series
APPLICATIONS FEATURES AND BENEFITS
ELECTRICAL ENVIRONMENTAL MECHANICAL
Wire-to-Wire (WTW) connectors have been used in the industrial market for years with traditional
2-Piece (plug & socket) connector systems. These require crimp and poke wire terminations to
connect discrete wires together. While these provide repeated pluggability and latching, they are
often size and cost prohibited in applications where the wires may only need to be replaced once or
twice during their life.
The reduced 9286-250 series of junction connectors expands on the already proven 9286 poke-home
discrete WTW family of connectors, but in a smaller package size. Junction box connectors electrically
connect each of the inserted wires together, similar to a branch or splitter application but with multiple
outputs. The development of an active stainless steel spring contact eliminates the need for push button
activation to insert and remove wires which offers a significant cost savings. The mechanical properties
of this contact provide maximum wire retention across a broad range of solid and stranded wire gauges,
making this connector very versatile in field installations.
HOW TO ORDER
CURRENT RATING
X
Insulator Color
Standard
9 = UL White
Specal Order Only
0 = UL Black
2 = UL Brown
3 = UL Blue
4 = UL Yellow
6 = UL Green
7 = UL Orange
06
Plating Option
06 = Tin All Over
Industrial Machine Controls; motors, drives, solenoids,
sensors, fans, pumps, etc...
Commercial Buildings; controls, security, fire and sensors
Smart Grid; meters, breakers and panels
SSL/LED; fixtures, signage and streetlights
Application notes; refer to 201-01-172
Voltage Rating: 300 VAC
Current Rating: See matrix below
Operating Temperature:
-40ºC to +130ºC
Insulator Material; Glass-Filled Nylon 46; UL94V0
Fixed Contact Material; Copper Alloy
Flexing Contact; Stainless Steel
Fixed Contact Plating; Tin over Nickel
Durability; 5 Cycles
Simple strip and poke-home wire insertion with twist and pull wire extraction
High spring force stainless steel contact maximizes cost, strength and
flexibility
Accepts 18-24 AWG solid and stranded wires
Expanded size offering to allow up to 8 wires to be connected together
00X
Number of Ways
Code No of
Ways DIM. A
004 4 8.0/8.5
006 6 12.0/12.5
008 8 16.0/16.5
00
Prefix
Code Type Details
00 Poke
Home
Wire-to-
WIre
253
Wire Size
Code Accepted
Wire Gauge
Max
Insulation
253 18 – 24 AWG
Solid or Stranded
2.10mm
Diameter
X
Internal Wire
Stop and UL
Approval
Code Contact
Style
UL
Approved
0No wire
stop Yes
1With wire
stop Yes
UL File #E90723
Wire gauge Maximum approved current (amps)
UL (USA) UL (Canada)
18AWG 8 7
20AWG 8 7
22AWG 6 6
24AWG 4 4
121319
y m /‘\'/) ( A A macaw smuwcoww -—-T»7 a REF TO W/RE 570R /F H 4 AND 5 POSITION PARTS X 75 @ N C)? D/M, A fi‘m J fifi <——;>5 L E2 f, 4 L
18 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
Reduced Junction Box Connectors
18-24 AWG: 9286-250
NOTES:
1. WIRE-TO-WIRE POKE HOME CONNECTOR, JUNCTION BOX (ALL WIRES
CONNECTED). AVAILABLE WITH OR WITHOUT INTERNAL WIRE STOP.
2. WIRE CONDUCTOR SIZES: 18-24AWG, SOLID AND STRANDED. SEE
ABOVE FOR WIRE STRIPPING GUIDELINES.
3. HOUSING MATERIAL: GLASS-FILLED STANYL 46, UL94V-0.
COLOR PER P.N. CODE AT LEFT.
4. FIXED CONTACT: TIN PLATED COPPER ALLOY.
5. FLEXING CONTACT: STAINLESS STEEL.
6. PACKAGING TO BE IN BULK; 1,000 PARTS PER BAG.
7. FOR FURTHER DETAILS, REFER TO SPECIFICATION 201-01-171 AND
APPLICATION NOTES 201-01-172.
8. UL APPROVED. UL REFERENCE E90723 (US AND CANADA)
Code No of
Ways DIM. A
004 4 8.0/8.5
006 6 12.0/12.5
008 8 16.0/16.5
Wire Stripping Guidelines
Insulation Diameter Strip Length
<=2.10mm 4.0±0.5
>2.10mm (NOTE 7) 7.0±0.5
BOTTOM VIEW
FOR REFERENCE
16.0
DIM. A
2.2 TYP
BOTH ENDS
4.0 TYP
2.0
4.0
APPLICABLE, BOTH ENDS
5.0 REF MINIMUM WIRE
INSERTION, BOTH ENDS
INSULATION
DIAMETER
STRIP LENGTH
121319
”M A man snow c
19
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
Reduced Junction Box Connectors
18-24 AWG: 9286-250
Wire Trim
POKE HOME JUNCTION BOX
WIRE TRIM
REST POSITION OF CONTACT TIP
POKE HOME THRU WIRE
ASSEMBLY
FOR FULL ASSEMBLY DETAILS REFER TO APPLICATION NOTE 201-01-172
Insulation Diameter Wire Trim Length X
Up to 2.10 Diameter 4.00 ± 0.50
Above 2.10mm Diameter
See Application Notes
201-01-172
7.00 ± 0.50
121319
, 8 AW) ( A AWN | 13—!
20 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
GERNERAL DESCRIPTION
Poke-Home wire-to-wire connectors have been proven to be very simple and reliable over the past several
years. Until today, they have been focused on the light industrial wire gauge ranges of 18AWG to 24AWG.
The latest product has just been developed to address the heavier 12AWG to 18AWG. This new 300 series of
connectors employs a single, phosphor bronze contact technology with a center wire stop. Accepting both
solid and stranded wires, pre-stripped wires can be easily inserted and then twist and pulled to be removed.
Thru Wire Connector
12-18 AWG: WTW - 9286-300
General Information
APPLICATIONS
Industrial Machine Controls: motors, drives,
solenoids, pumps, coils or transformers
Commercial Building: controls, security and fire
Smart Grid: meters, breakers and panels
SSL: fixtures and wiring
Application notes: refer to 201-01-218
ENVIRONMENTAL
Operating Temperature:
-40°C to +130°C
MECHANICAL
Contact Material: Phosphor Bronze
Plating: Pure Tin Over Nickel
Durability: 5 Cycles
ELECTRICAL
Current Rating:
Connector Wire Gauge Solid Wire
16 AWG 18 AWG 10A
16 AWG 16 AWG 11A
14 AWG 14 AWG 13A
12 AWG 12 AWG 15A
Voltage Rating: 600 V
FEATURES AND BENEFITS
Simple strip and poke-home wire insertion with
twist and pull wire extraction
One-Piece contact with high force contact beams
provide mechanical stability and wire retention
Integral wires stop prevents over insertion
-316 product will accept both 16AWG and 18AWG
solid and stranded wires
9286
Series
HOW TO ORDER
X
Housing Color
Standard
9 = UL White/
NaturalSpecial
8 = UL Black
0 = UL Gray
1 = UL Violet
2 = UL Brown
3 = UL Blue
4 = UL Yellow
5 = UL Red
6 = UL Green
7 = UL Orange
06
Plating Option
06 = Lead-Free Tin
All Over
00
Prefix
00 = Standard Products
001
Number of Ways
001 = 1
3XX
Wire Size*
312 = 12AWG/3.3 – 3.9mm2
314 = 14AWG/2.0 – 2.5mm2
316 = 16AWG/1.3 – 1.6mm2
18AWG/0.8 – 1.0mm2
*Solid or Standed wire accepted:
more than 19 strands per wire not recommended
Certification: UL File #E90723
091420
(8 PAW V A /‘\'/) fl 16 0}? 18A WG /e‘s,\Y/.21( |
21
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
00-9286-001-316-X06
Thru Wire Connector
12-18 AWG: WTW - 9286-300
APPROXIMATE STRIP
LENGTH GUIDE
LENGTH
STRANDED WIRE
MUST BE PROPERLY
TWISTED OR TINNED.
WIRE
NOTES:
1. HOUSING MATERIAL: GLASS-FILLED THERMOPLASTIC FLAME
RETARDANT PER UL94V-0: COLOR SEE PAGE 1.
2. CONTACT MATERIAL: HIGH STRENGTH COPPER ALLOY.
3. CONTACT PLATING: LEAD-FREE TIN OVER NICKEL.
4. PACKAGING TO BE IN BULK, 500 PER BAG.
5. FOR ADDITIONAL INFORMATION, SEE AVX PRODUCT
SPECIFICATION 201-01-217, AND APPLICATION NOTES 201-01-218
121319
, 8 AW) ( A \ ‘ M A WG WIRE \ MD] 6%? HIM 3—135 MU] e1? HIM TB 1“ AIM |
22 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
00-9286-001-314-X06
Thru Wire Connector
12-18 AWG: WTW - 9286-300
APPROXIMATE STRIP
LENGTH GUIDE
LENGTH
STRANDED WIRE
MUST BE PROPERLY
TWISTED OR TINNED.
NOTES:
1. HOUSING MATERIAL: GLASS-FILLED THERMOPLASTIC FLAME
RETARDANT PER UL94V-0: COLOR SEE PAGE 1.
2. CONTACT MATERIAL: HIGH STRENGTH COPPER ALLOY.
3. CONTACT PLATING: LEAD-FREE TIN OVER NICKEL.
4. PACKAGING TO BE IN BULK, 500 PER BAG.
5. FOR ADDITIONAL INFORMATION, SEE AVX PRODUCT
SPECIFICATION 201-01-217,AND APPLICATION NOTES 201-01-218.
121319
(0 A A mew snow cow: /A\V/) 12 A WG WIRE MAX $25 9 2 5m LENG <7a pprox/maie="" 5rmp—=""> ‘fl2 AWG V i) HI_IHI_I (i flaw l=1Hl=1H A ‘30- [NM |
23
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
00-9286-001-312-X06
Thru Wire Connector
12-18 AWG: WTW - 9286-300
NOTES:
1. HOUSING MATERIAL: GLASS-FILLED THERMOPLASTIC FLAME
RETARDANT PER UL94V-0: COLOR SEE PAGE 1.
2. CONTACT MATERIAL: HIGH STRENGTH COPPER ALLOY.
3. CONTACT PLATING: LEAD-FREE TIN OVER NICKEL.
4. PACKAGING TO BE IN BULK, 500 PER BAG.
5. FOR ADDITIONAL INFORMATION, SEE AVX PRODUCT
SPECIFICATION 201-01-217,AND APPLICATION NOTES 201-01-218.
APPROXIMATE STRIP
LENGTH GUIDE
LENGTH
STRANDED WIRE
MUST BE PROPERLY
TWISTED OR TINNED.
121319
A n A KYOCERA GROUP COMPANY
North America
Tel: +1 864-967-2150
Central America
Tel: +55 11-46881960
Asia
Tel: +65 6286-7555
Japan
Tel: +81 740-321250
Europe
Tel: +44 1276-697000
VISIT US AT
FOLLOW US:
WWW.AVX.COM

Products related to this Datasheet

CONN JUNCT 4POS POKE-IN 18-26AWG
CONN JUNCT 4POS POKE-IN 18-24AWG
CONN JUNCT 6POS POKE-IN 18-24AWG
CONN JUNCT 2POS POKE-IN 18-24AWG
CONN JUNCT 1POS POKE-IN 16-18AWG
CONN JUNCT 1POS POKE-IN 16-18AWG
CONN JUNCT 3POS POKE-IN 18-26AWG
CONN JUNCT 2POS POKE-IN 18-26AWG
CONN JUNCT 5POS POKE-IN 18-24AWG
CONN JUNCT 6POS POKE-IN 18-24AWG
CONN JUNCTION 1POS POKE-IN 12AWG
CONN JUNCT 1POS POKE-IN 18-26AWG
CONN JUNCT 8POS POKE-IN 18-24AWG
CONN JUNCT 4POS POKE-IN 18-26AWG
CONN JUNCTION 1POS POKE-IN 14AWG
CONN JUNCT 6POS POKE-IN 18-26AWG
CONN JUNCT 8POS POKE-IN 18-26AWG
CONN JUNCT 3POS POKE-IN 18-24AWG
CONN JUNCT 1POS POKE-IN 16-18AWG
CONN JUNCT 6POS POKE-IN 18-26AWG
CONN JUNCT 4POS POKE-IN 18-24AWG
CONN JUNCT 8POS POKE-IN 18-26AWG
CONN JUNCT 1POS POKE-IN 18-24AWG
CONN JUNCTION 1POS POKE-IN 14AWG
CONN JUNCTION 1POS POKE-IN 12AWG
CONN JUNCT 1POS POKE-IN 16-18AWG
CONN JUNCTION 1POS POKE-IN 14AWG
CONN JUNCTION 1POS POKE-IN 12AWG
CONN JUNCT 1POS POKE-IN 16-18AWG
CONN JUNCTION 1POS POKE-IN 14AWG