15100-401-ND Datasheet by Eaton - Bussmann Electrical Division

View All Related Products | Download PDF Datasheet
Telecom protection products — 14
Telecom protection
products
Contents
Description Poles
Volts
DC Amps
Section
page
TPCDS compact fused pullout
disconnect with TCP fuses 1 80 3-125 2
TPMDS miniature fused pullout
disconnect with TPM fuses 1 80 3-30 3
TP1590-4 fused pullout
disconnect for TPA fuses 4 145/80 40/50
4
TP15914 fused pullout
disconnect for TPA fuses 4145 50
TPA (170 Vdc) and TPA-B
(65 Vdc) fuses 170/65 3-40 5
15800 fused pullout disconnect
with TPS fuses and GMT-A
open fuse indicator
1 60 3-70 6
TP158HC fused pullout
disconnect for TPL-B power
fuses and GMT-A open fuse
indicator
1 80 70-250
7
15100 fused pullout disconnect
for TPL fuses 1 60 70-800
TPHCS fused pullout
disconnect for TPL fuses 1 80 70-800 8
TPL fuses 170 70-800 9
TPN current limiting DC fuses 170 1-600 10
70 Type indicating fuses 125 AC
300 DC 1/10-10
11
15087 fuse holders for
70 Type fuses 1 300 12
HLS, HLT and PCT fuse
holders for GMT fuses
Up to
25
125 AC
60 DC 15
12
GMT fast-acting fuses 125 AC
60 DC
18/100
to 3
GMT-A fast-acting open fuse
indicator for use with 15800
and TP158HC disconnects
— —
Circuit protection for telecom
applications
Complete portfolio of
Bussmann series Telpower™
fuses, disconnects and holders
specifically designed for
telecom applications
14-1
BUSSMANN SERIES FULL LINE CATALOG 1007 — JUNE 2017 Eaton.com/bussmannseries
14 — Telecom protection products
TPC fuses and TPCDS pullout disconnects
Telpower TPC compact current-
limiting fuses mount in the
TPCDS compact fused pullout
disconnect that’s available in
two disconnect profiles and
a variety of terminal styles.
Recommended 0.75" center-to-
center product spacing.
Ratings
Volts 80 Vdc
Amps 3-125 A
IR 100 kA
Agency information
UL Recognized (investigated to UL 1801) as a disconnect switch
for the interruption of load current by means of withdrawing the
fuse pullout
Recognized to US and Canadian requirements under the
component recognition program of Underwriters Laboratories Inc.
Files E219046 and E56412
CE
Typical applications
Telecommunications DC power circuit protection
Replacement of DC telecom circuit breakers
Applications where venting of arc or molten metals and gases
during opening would pose a problem to surrounding devices
Features
Highest interrupting rating (100 kA) available and complete system
coordination for DC circuit protection for compact footprint
providing a superior protection solution for replacement of existing
DC telecom circuit breakers
AmpColor ID™ system makes fuse replacement easy
Local and remote open fuse indication. Local alarm indication
provided by LED on TPC fuse
Remote alarm terminal available in three positions common to DC
circuit protection devices
TPC fuses
Catalog no. (amps)
TPC-3 TPC-8 TPC-25 TPC-75
TPC-4 TPC-10 TPC-30 TPC-90
TPC-5 TPC-12 TPC-40 TPC-100
TPC-6 TPC-15 TPC-50 TPC-125
TPC-7 TPC-20 TPC-60
TPCDS catalog number system
Catalog no. prefix
TPCDS TPCDS-D-
Terminal style
BB -
Bullet contact on the
line, bullet contact on
the load
CC -
Screw Clamp terminal
on the line, screw Clamp
terminal on the load
BS -
Bullet contact on the
line, stud terminal on
the load
BC -
Bullet contact on the line,
screw Clamp terminal on
the load
SS -
Stud terminal on the
line, stud terminal on
the load
SEC -
Stud terminal on the line,
English threads for stud
(10-32), screw Clamp
terminal on the load
SMC -
Stud terminal on the line,
metric threads for stud
(M5), screw Clamp terminal
on the load
Thread
M -
Metric threads for panel
mount fasteners (M3)
and stud (M5)
E -
English threads for
panel mount fasteners
(6-32) and stud (10-32)
Remote alarm terminal distance
1 - 0.645 inch from line
terminal 1 - Side ouput (available on CC
and BC terminal styles)
2 - 0.970 inch from line
terminal 2 -
Bottom output, .970 inch
from line terminal (available
on BC terminal style only)
3 - 1.285 inch from line
terminal
Catalog no.
TPCDS-BBE-1 TPCDS-BSE-2 TPCDS-SSE-3 TPCDS-D-SEC1*
TPCDS-BBE-2 TPCDS-BSE-3 TPCDS-SSM-1 TPCDS-D-SEC2*
TPCDS-BBE-3 TPCDS-BSM-1 TPCDS-SSM-2 TPCDS-D-SMC1*
TPCDS-BBM-1 TPCDS-BSM-2 TPCDS-SSM-3 TPCDS-D-SMC2*
TPCDS-BBM-2 TPCDS-BSM-3 TPCDS-D-BC1*
TPCDS-BBM-3 TPCDS-SSE-1 TPCDS-D-BC2*
TPCDS-BSE-1 TPCDS-SSE-2 TPCDS-D-CC1*
* Not investigated to Canadian requirements.
Dimensions
See data sheet no. 5023
Data sheet no. 5023
14-2 BUSSMANN SERIES FULL LINE CATALOG 1007 — JUNE 2017 Eaton.com/bussmannseries
LINE Eus mm a mu Bus HR cummsn memru stwsrmcz
Telecom protection products — 14
Telecom protection
products
TPM fuse and TPMDS pullout disconnect
Telpower TPM miniature
current-limiting fusses mount
in the miniature TPMDS pullout
disconnect. The TPM fuses
feature local open fuse indication
and TPMDS is easily integrated
into remote indication systems.
Ratings
Volts 80 Vdc
Amps 3-30 A
IR 20 kA
Agency information
UL Recognized (investigated to UL 1801) as a disconnect switch
for the interruption of load current by means of withdrawing the
fuse pullout
Recognized to US and Canadian requirements under the
component recognition program of Underwriters Laboratories Inc.
Files E219046 and E56412
CE
Typical applications
Telecommunications DC power circuit protection
Applications with restricted space, or mounting in 1 U
(1.75"/44.5mm) panels
Features
Smallest and most versatile fused disconnect switch available
allowing for assembly into 1 U (1.75"/44.5mm) panel. Easy to
connect; Load: 1/4" quick-connect or bolted connection with 10-32
(M5) captive nut, Line: 1/4" quick-connect or screw connection
with clearance hole for #10 (M5) bolt
AmpColor ID™ System makes fuse replacement easy
Switch design provides for easy panel mounting by single captive
4-40 (M3) nut and panel notch integral to switch footprint
Complete system coordination capability with local and remote
open fuse indication. Local alarm indication provided by LED on
TPM fuse (maximum alarm circuit current: 20mA)
TPM fuses
Catalog no. (amps)
TPM-3 TPM-6 TPM-10 TPM-20
TPM-4 TPM-7 TPM-12 TPM-25
TPM-5 TPM-8 TPM-15 TPM-30
TPMDS pullout disconnects (accept all TPM fuse amp
ratings)
Catalog no. Description
TPMDS-E Pullout fused disconnect, English
hardware
TPMDS-M Pullout fused disconnect, metric
hardware
Dimensions
See data sheet no. 5022
Data sheet no. 5022
TPMDS alarm schematic
Notes:
1. The resistance (R) must be
provided by the end-user to
limit the open fuse indication
output current to a maximum
of 20mA. The “R” value
should be calculated using
the system voltage value. If
remote indication functionality
is not required, the END-
USER CIRCUITRY must still
be supplied to provide a
resistance path to the return
for the local indication to
properly function.
2 The fuse is polarized to
maintain proper orientation
with the switch housing.
The line and load terminals
are identified on the switch
housing.
14-3
BUSSMANN SERIES FULL LINE CATALOG 1007 — JUNE 2017 Eaton.com/bussmannseries
14 — Telecom protection products
TP15900-4 fused pullout disconnect for TPA fuses
4-pole fused pullout disconnect
for use with Telpower TPA and
TPA-B fuses. Pullout disconnects
feature remote open fuse
indication capability.
Ratings
Volts
145 Vdc@40 A per pole
80 Vdc@50 A per pole
Agency information
UL Recognized File E97649 as a disconnect switch for interruption
of load current by means of withdrawing the fuse carrier
UL Recognized as a component for telecommunication power
distribution equipment (UL category QPQY2)
UL Recognized fuses for branch circuit protection
CSA Component Acceptance for the system
CE
Typical applications
Telecommunications DC power circuit protection
Features
Ease of installation - connection directly to busbar, reduces exter-
nal wiring per pole. Rear accessibility for line and load terminations
LED alarm signaling (LED current 30mA max)
Local and remote open-fuse indication along with fuse orientation
rejection feature and fuse presence indication
Alarm test probe point, to allow on-site checking of alarm circuitry
Catalog no. Description
TP15900-4 4-pole common disconnect
TP15900-41 4-pole common disconnect w/ split alarm, split line
Available fuses
Catalog symbol Amps Volts DC IR
TPA 3, 5, 10, 15, 20, 25, 30, 40, 50 170 100 kA
TPA-B 20, 25, 30 65 20 kA
Accessories
Spare fuse holders: catalog numbers 5TPH and TPSFH-AS.
Dimensions — mm (in)
TP15914 fused pullout disconnect
Modular 4-pole fuse pullout
disconnect for us with TPA
fuses. 4-poles per module can
be ganged up to four modules
for a total of 16 poles. The
TP15914 features open fuse
indication and fuse presence
indication along with fuse
orientation rejection.
Ratings
Volts 145 Vdc
Amps 50 A max per pole
Agency information
UL Recognized, Guide JFHR2, File E56412
UL Recognized as a disconnect switch for interruption of load
current by means of withdrawing the fuse carrier
UL Recognized as a component for telecommunication power
distribution equipment (UL category QPQYZ)
UL Recognized fuses for branch circuit protection
CSA Certified, Class 1422-30, File 53787
CSA Component Acceptance for the system
Typical applications
Telecommunications DC power circuit protection
Features
Totally enclosed module directly connects to busbar for reduced
external wiring—per pole and easy installation with front access
load and line connection standard — double lug load connections
8 AWG wire
LED alarm signaling (LED current 30mA max)
Remote alarm with alarm test probe point to allow on-site check-
ing of alarm circuitry
Catalog no. Description
TP15914 English hardware
TP15914-1 Metric hardware
Accessories
Spare fuse holders: catalog numbers 5TPH and TPSFH-A
Dimensions — mm (in)
Data sheet no. 5001-or-5019? Data sheet no. 5011
BiPolar LED
0.745
0.284
1.5
4.27
3.57
0.625
0.215
1.5
76.07
3.0
14-4 BUSSMANN SERIES FULL LINE CATALOG 1007 — JUNE 2017 Eaton.com/bussmannseries
Telecom protection products — 14
Telecom protection
products
TPA and TPA-B indicating fuses
Indicating DC power distribution
fuse for use in TP15900-4
and TP15914 fused pullout
disconnects.
Ratings
Volts
170 Vdc (TPA)
65 Vdc (TPA-B)
Amps
3-50 A (TPA)
20-30 A (TPA-B)
IR
100 kA (TPA)
20 kA (TPA-B)
Agency information
UL Recognized, Guide JFHR2, File E56412
CSA Certified, Class 1422-30, File 53787
CE, RoHS compliant
Typical applications
Telecommunications DC power circuit protection
Features
Indication pin provides for local and remote indication when
used with Bussmann series TP15900-4 and TP15914 disconnect
switches
Patented orange ring” fuse orientation features assures correct
fuse position
The UL Recognized ratings and current-limiting capability
make this fuse ideal for cable protection on existing DC power
distribution systems
A unique blue label is used on all Telpower fuses to designate their
DC capability
Catalog no. (amps)
170 Vdc
TPA-3 TPA-10 TPA-20 TPA-30 TPA-50
TPA-5 TPA-15 TPA-25 TPA-40
65 Vdc
TPA-B-20 TPA-B-25 TPA-B-30
Accessories
Spare fuse holders: 5 position holder; 5TPH; 6 position holder;
TPSFH-AS
Dimensions — in (mm)
Data sheet no. 5012
0.58
(14.6)
0.41
(10.3)
1.5
(38)
2011/65/EU
14-5
BUSSMANN SERIES FULL LINE CATALOG 1007 — JUNE 2017 Eaton.com/bussmannseries
Luacammmr \ m an Sm 1 4s m u 4 s m mu! R956 vm emu ‘ Fuse pi A. a. m , ‘ mm Moumng flange (2) Cenmmun I" 3; ‘ xfl'é 0.88 mm “‘—' Reav Access
14 — Telecom protection products
15800 fused pullout disconnect for the TPS fuse
Fused disconnect switch for
use only with the TPS main
fuses (1 to 70 amp) and GMT-A
alarm fuses (see page 14-12). It
is recommend to also use the
GMT-X cover for the GMT-A
fuses.
Ratings
Volts 60 Vdc
Amps 3-70 A
SCCR 100 kA
Agency information
UL Recognized, Guide QPQY2, File E97649
CE
Typical applications
Telecommunications DC power circuit protection
Features
Alarm output with wire wrap terminal or connection to 0.063”
thick common alarm bus
Spare alarm and power fuse compartment
Mounting hardware included
Catalog no. Description
15800-R-200 Rear access panel mounting
15800-F-200 Front access panel mounting
Accessories
Spare fuse holders: catalog numbers TPSFH-AS (TPS fuses) and
TPSFH-T (GMT fuses)
Dimensions — in (mm)
TPS main power fuse
Non-indicating DC power distribution ferrule fuses specifically
designed to meet the unique needs of DC power distribution
systems. For use with Bussmann series 15800 fused pullout
disconnect. Vertical and horizontal PCB tab versions available for
circuit board applications.
Ratings
Volts 170 Vdc
Amps 1-80 A
IR 100 kA
Agency information
UL Recognized, Guide JFHR2, File E56412, RoHS compliant, CE
Typical applications
Telecommunications DC power circuit protection
Applications requiring printed circuit board mounting
Features
The UL Recognized ratings and current-limiting capability
make this fuse ideal for cable protection on existing DC power
distribution systems
A unique blue label is used on all Telpower fuses to designate their
DC capability
PCB tab versions eliminate the need for fuseclips when mounting
the fuse on a circuit board
Catalog no. (amps)
Ferrule
TPS-1 TPS-6 TPS-25 TPS-50
TPS-2 TPS-10 TPS-30 TPS-60
TPS-3 TPS-15 TPS-35 TPS-70
TPS-5 TPS-20 TPS-40 TPS-80
Horizontal PCB tabs
TPS-1L TPS-6L TPS-25L TPS-50L
TPS-2L TPS-10L TPS-30L TPS-60L
TPS-3L TPS-15L TPS-35L TPS-70L
TPS-5L TPS-20L TPS-40L TPS-70LB*
Vertical PCB tabs
TPS-40V TPS-50V TPS-80V
* LB = Bolt tag
Accessories
Spare fuse holder TPSFH-AS, see page 15-4
Dimensions — in (mm)
Data sheet no. 5002 Data sheet no.5009
2011/65/EU
72 lb-in
0.88
(22)
0.56
(14)
14-6 BUSSMANN SERIES FULL LINE CATALOG 1007 — JUNE 2017 Eaton.com/bussmannseries
Telecom protection products — 14
Telecom protection
products
TP158HC fused pullout disconnect
High amp panel mount, rear
access fuses pullout disconnect
for use only with Telpower
TPL-B main fuses (70-250 A) and
GMT-A alarm fuses (see page
14-12). It is recommend to also
use the GMT-X cover for the
GMT-A fuses.
Ratings
Volts 80 Vdc
Amps 70-250 A
SCCR 100 kA
Agency information
UL Recognized (investigated
to UL 1801) as a disconnect
switch for the interruption
of load current by means of
withdrawing the fuse pullout,
Guide QPQY2, File E97649
Typical applications
Telecommunications DC power circuit protection
Features
Similar profile, mounting method, and backplane configuration as
15800. The TP158HC can be installed into existing 15800 panels
using the space of two 15800 pullout disconnects
Innovative new fuse pullout design eliminates need for tools to
replace the Telpower type TPL-B fuse
Alarm output with wire wrap terminal or connection to 0.063 inch
(1.6mm) thick common alarm bus
Hardware included: Load: washer, split lockwasher, and 5/16 - 18
nut (metric M8 x 1.25)
Catalog no. Hardware type
TP158HC English
TP158HC-M Metric
Accessories
Spare fuse holders: TPSFH-LB (TPL-B fuses) and TPSFH-T (GMT
fuses)
Dimensions
See data sheet no. 5021
Application notes
The line connection uses a 1/4-20 bolt (metric M6 x 1) that threads
into the line terminal. The line terminal is designed with a float of
±0.02" (±0.50mm) to allow for variation in the distance between the
TP158HC mounting flange and the line busbar (see Dimensions).
Equipment should be designed to eliminate any relative movement
between the TP158HC mounting flange and the line busbar.
The alarm circuit is not intended for pre-charging capacitive circuits.
Maximum alarm circuit current 1 A.
Data sheet no. 5021
15100 fused pullout disconnect
Fused pullout disconnect system
for use with TPL Telpower fuses.
Ratings
Volts 60 Vdc
Amps 70-800 A
SCCR 100 kA
Agency information
UL Recognized, Guide QPQY2, File E97649
CE
Typical applications
Telecommunications DC power circuit protection
Features
Single-pole fusible disconnect switch for primary DC power
distribution
Robust housing and terminal construction for demanding
applications
Panel mounting
Easily connected to line or load bus
Catalog no. TPL fuse amp range
15100-401 70-400
15100-601 300-800
Dimensions — in (mm)
Data sheet no. 5003
0.27 (6.75) dia. hole with 0.5 dia. x 0.16 (3.97) deep C'bore (4 holes)
2.63
(66.67)
1.31
(33.33)
4
(101.6)
3
(76.2)
5.25
(133.35)
7.13
(181.10)
3.63
(92.07)
2.75
(69.85)
6.75
(171.45)
5.75
(146.05)
14-7
BUSSMANN SERIES FULL LINE CATALOG 1007 — JUNE 2017 Eaton.com/bussmannseries
uczi h s‘ 5! 57w 0 mm we « 4: b ¢U$¢ frail 13W \ L%sz§:s:a’ ‘—mez-‘ m 52) mom [Seuss m PLaled MW ‘7‘3974' (650} Mar ‘M . pm 398375 RKDmmg Eamwmwmm n m ,D ’ O _ . . "L mm o in Urn mm 9 o” mmm § — “ a 292 W figke 47.4 ‘ 54) 12.6231
14 — Telecom protection products
TPHCS high current fused pullout disconnect
High current fused pullout disconnect
for use with TPL-B, TPL-C and TPH
Telpower fuses. Available as a
complete pullout disconnect or just
the pullout. Base may be purchased
separately.
Ratings
Volts 80 Vdc
Amps 70-800 A
SCCR 100 kA
Agency information
UL Recognized (investigated to
UL 1801) as a disconnect switch
for the interruption of load
current by means of withdraw-
ing the fuse carrier
UL Recognized to meet the requirements for Canadian Standards
Typical applications
Telecommunications DC power circuit protection
Features
Innovative design eliminates need for tools to replace the TPL-B,
TPL-C or TPH fuses
Easy to install–captive fasteners allow for direct busbar mounting
(bolts not included). Standard 1/4” male quick- connect terminal
for effortless remote alarm connection
Optional new electronic alarm eliminates need for parallel
indicating fuses while providing local and remote open-fuse
indications (maximum remote alarm current: 20mA); Bipolar alarm:
designed for both central office and Radio applications, Local LED
open fuse indication for ease-of-viewing.
Fuse presence window allows for easy viewing of installed fuse
amp rating
Compact design is ideal for today’s high power, high-density
cabinets
Catalog no.
(pullout and base)
Hardware
(option)
For fuse
symbol
Fuse amp
range
TPHCS250-M Metric TPL-B 70-250
TPHCS250-E English TPL-B 70-250
TPHCS250-ML Metric, LED TPL-B 70-250
TPHCS250-EL English, LED TPL-B 70-250
TPHCS250-MAV Metric, alarm TPL-B 70-250
TPHCS250-EAV English, alarm TPL-B 70-250
TPHCS800-M Metric TPL-C or TPH 300-800
TPHCS800-E English TPL-C or TPH 300-800
TPHCS800-ML Metric, LED TPL-C or TPH 300-800
TPHCS800-EL English, LED TPL-C or TPH 300-800
TPHCS800-MAV Metric, alarm TPL-C or TPH 300-800
TPHCS800-EAV English, alarm TPL-C or TPH 300-800
Catalog no.
(components)
Description rating/
hardware/option
For fuse
symbol
Amp
range
TPHCS250-P Pullout only (250 A) TPL-B 70-250
TPHCS800-P Pullout only (800 A) TPL-C or TPH 300-800
TPHCS-B-M Base only, metric 800 max
TPHCS-B-E Base only, English 800 max
TPHCS-B-ML Base only, metric, LED 800 max
TPHCS-B-EL Base only, English, LED 800 max
TPHCS-B-MAV Base only, metric, alarm 800 max
TPHCS-B-EAV Base only, English,
alarm 800 max
Notes
1. TPHCS250 and TPHCS800 pullouts and bases are the same with
exception to the fuse type the pullout will hold (TPL-B, TPL-C or
TPH).
2. Plastic rated UL 94V0, 140ºC RTI.
Dimensions — mm (in)
Data sheet no. 5020
TPHCS800-MAV shown
14-8 BUSSMANN SERIES FULL LINE CATALOG 1007 — JUNE 2017 Eaton.com/bussmannseries
Telecom protection products — 14
Telecom protection
products
TPL high amp DC fuses
High amp DC power distribution fuses
for use with Telpower 15100, 15200,
TP158HC and TPHCS fused pullout
disconnects. TPL-TA adapter kit is
necessary when replacing a UBO fuse.
Ratings
Volts 170 Vdc
Amps 70-800 A
IR 100 kA
Agency information
UL Recognized Guide JFHR2, File E56412 Bellcore
CE
Typical applications
Telecommunications power circuit protection
Features
Current-limiting capability designed for DC power distribution
systems
Recognized branch circuit protection
Complete system coordination capability
Energy savings with low watts loss, low operating temperatures,
and minimum I2t levels
Catalog no. Amps Catalog no. Amps
TPL-BA 70 TPL-BL 250
TPL-BB 80 TPL-CN 300
TPL-BC 90 TPL-CO 350
TPL-BD 100 TPL-CR 400
TPL-BE 125 TPL-CU 450
TPL-BF 150 TPL-CV 500
TPL-BG 175 TPL-CZ 600
TPL-BH 200 TPL-CZH 800
TPL-BK 225
Accessories
Spare fuse holders: TPSFH-LB (for TPL-B fuses) TPSFH-LC (for
TPL-C fuses)
Dimensions — in (mm)
Data sheet no. 5005
0.33
(8)
2.66
(68)
2.19
(56)
1.91
(48)
1.16
(29)
0.75
(19)
0.19
(5)
1.0
(25)
0.25
(6)
1.50
(38)
TPL-BA, TPL-BD, TPL-BF, TPL-BH, TPL-BK and TPL-BL
TPL-CN, TPL-CR, TPL-CV and TPL-CZ
3.50
(89)
2.44
(62)
1.25
(32)
1.0
(25)
0.41
(10)
14-9
BUSSMANN SERIES FULL LINE CATALOG 1007 — JUNE 2017 Eaton.com/bussmannseries
14 — Telecom protection products
TPN high amp current limiting DC fuses
The TPN fuse is a current-
limiting DC power distribution
fuse that’s dimensionally similar
to UL Class R branch circuit
fuses making them easy to
install using standard RM60_
modular Class R fuse blocks.
Ratings
Volts 170 Vdc
Amps 1-600 A
IR 100 kA
Agency information
UL Recognized, Guide JFHR2, File E56412
Typical applications
Telecommunications power circuit protection
Features
Current-limiting capability designed for DC power distribution
systems
Recognized branch circuit protection
Complete system coordination capability
Energy savings with low watts loss, low operating temperatures,
and minimum I2t levels
Catalog no. (amps)
TPN-1 TPN-30 TPN-90 TPN-250
TPN-3 TPN-35 TPN-100 TPN-300
TPN-5 TPN-40 TPN-110 TPN-350
TPN-6 TPN-45 TPN-125 TPN-400
TPN-10 TPN-50 TPN-150 TPN-450
TPN-15 TPN-60 TPN-175 TPN-500
TPN-20 TPN-70 TPN-200 TPN-600
TPN-25 TPN-80 TPN-225
Accessories
Spare fuse holders:TPSFH-N30 (for TPN 1-30) TPSFH-N60 (for TPN
35-60)
Recommended modular* Class R fuse blocks
Catalog no. Amps
RM25030-1CR 30
RM25060-1CR 60
RM25100-1CR 10 0
RM25200-1CR 200
RM25400-1CR 400
RM25600-1CR 600
* Blocks can be snapped together to create the number of required poles. Optional
indicating and non-indicating finger-safe covers available for all blocks.
Data sheet no. 5006
0.81
(21)
3
(76)
35 A to 60 A
2
(51)
0.56
(14)
Up to 30 A
5.88
(149)
70A to 100A
7.13
(181)
110A to 200A
225A to 400A
8.63
(219)
450A to 600A
10.38
(264)
2.88
(73)
2.38
(60)
1.56
(38)
1.06
(27)
Dimensions — in (mm)
14-10 BUSSMANN SERIES FULL LINE CATALOG 1007 — JUNE 2017 Eaton.com/bussmannseries
Telecom protection products — 14
Telecom protection
products
70 Type pin indicating fuses
Pin indicating fuse for use in the
15087 panel-mount fuse holder
Ratings
Volts
125 Vac
300 Vdc
Amps 1/10-10 A
IR 1 kA @ 300 Vdc
Agency information
UL Recognized, Guide JDYX2, File E19180 Bellcore
CE
Catalog no.
(amps) Color code
Lucent comcode
ref. no. Code/list no.
70P-1/10A* Gray/White 100203413 KS23751-L10
70R-15/100A* Red/White 101384550 KS23751-L11
70E-18/100A* Yellow 100203363 KS23751-L5
70X-2/10A Black
70F-1/4A* Violet 100203371 KS23751-L6
70K-1/4A* Violet/White 100203405 KS23751-L9
70G-1/2A* Red 100203389 KS23751-L7
70H-3/4A* Brown 100203397 KS23751-L8
70I-1A Pink
70A-1-1/3A*† White 100203322 KS23751-L1
70B-2A* Orange 100203330 KS23751-L2
70C-3A* Blue 100203348 KS23751-L3
70J-3-1/2A Black/White —
70D-5A* Grn/Black 100203355 KS23751-L4
70L-6A Grn/White —
70M-8A Brown/White —
70N-10A Violet/Yellow —
72A Plastic Case (dummy) 100203421 —
72B Blister Pack (dummy) 103757977 —
* Product designed to comply with Bellcore Technical Reference TR-TSY-000799
Issue 1, December 1988.
† Not UL Recognized.
Data sheet no. 5007
15087 fuse holder
Panel mount fuse holder for use
with 70 Type fuses.
Ratings
Volts 300 Vdc
Amps 12 A
Agency information
UL Recognized, Guide IZLT2, File E14853
CE
Flammability rating
UL 94V0
Catalog number 15087
Typical applications
Telecommunications DC power circuit protection
Features
Panel mount fuse holder for 70 type fuses supplied with two
screws
Remote alarm capability
Optional color-code eyelets
Color-coded eyelets are used with the fuse holder to indicate its
fuse amp rating.
Catalog no. Amps Color coding
1A1706-17 15/100 Red/White
1A1706-01 18/100 Yellow
1A1706-15 1/10 Gray/White
1A1706-02 2/10 Black
1A1706-03 1/4 Violet
1A1706-04 1/4 Violet/White
1A1706-05 1/2 Red
1A1706-06 3/4 Brown
1A1706-07 1 Pink
1A1706-08 1-1/3 White
1A1706-09 2 Orange
1A1706-10 3 Blue
1A1706-16 3-1/2 Black/White
1A1706-11 5 Green/Black
1A1706-12 6 Green/White
1A1706-13 8 Brown/White
1A1706-14 10 Violet/Yellow
Data sheet no. 5007
14-11
BUSSMANN SERIES FULL LINE CATALOG 1007 — JUNE 2017 Eaton.com/bussmannseries
14 — Telecom protection products
GMT-A fast-acting, open fuse indicator
Fast-acting GMT-A open fuse
indicator is designed specifically
for use in the Telpower 15800
and TP158HC fused pullout
disconnects as a means of
providing main fuse open
indication.
Agency information
UL Recognized, Guide JFHR2, File E56412
RoHS compliant
CE
Catalog no./color code: GMT-A/Yellow
Data sheet no. 5008
HLS, HLT, PCT fuse holders for GMT indicating
fuses
Configurable fuse holders for
use with GMT indicating fuses.
Ratings
Volts 60 Vdc/125 Vac
Amps 15 A per pole
Poles Up to 25
Agency information
UL Recognized, Guide IZLT2,
File E14853, 15 A (60 Vdc)
CE
Flammability rating
UL 94V0
Typical applications
Telecommunications DC power circuit protection
Features
Multiple configurations provide application flexibility
Compact size saves space
Catalog symbol Max. number of poles
PCT 1
HLS 1-25
HLT 1-25
Data sheet no. 5010
GMT indicating fuses for HLS, HLT and PCT fuse
holders
Fast-acting indicating fuses for
use in HLT, HLS, and PCT fuse
holders.
Ratings
Volts
60 Vdc
125 Vac
Amps 18/100-15 A
IR
450 A@60 Vdc
300 A@125 Vac
Agency information
UL Recognized, Guide JFHR2, File E56412
RoHS compliant
CE
Typical applications
Telecommunications DC power circuit protection
Features
Local and remote indication capability
Color coded for easy amp rating identification
Catalog no.
(amps)* Color code
Catalog no.
(amps) Color code
GMT-18/100A Yellow GMT-3-1/2A White/Blue
GMT-1/4A Violet GMT-4A White/Brown
GMT-3/8A Green/Gray GMT-5A Green
GMT-1/2A Red GMT-7-1/2A Black/White
GMT-65/100A Black GMT-10A Red/White
GMT-3/4A Brown GMT-12A Yellow/Green
GMT-1A Gray GMT-15A Red/Blue
GMT-1-1/3A White GMT-Dummy Gray body
GMT-1-1/2A White/Yellow GMT-X Clear cover
GMT-2A Orange GMT-Y Clear cover w/tab
GMT-3A Blue
* Some GMT ratings may be sold only in bulk pack.
Accessories
Spare fuse holder, catalog number TPSFH-T
Data sheet no. 5008
GMT - Dummy
2011/65/EU
2011/65/EU
14-12 BUSSMANN SERIES FULL LINE CATALOG 1007 — JUNE 2017 Eaton.com/bussmannseries