33472-000 Spec Datasheet by Molex

View All Related Products | Download PDF Datasheet
D molexfi' C REVISION: ECR/ECN INFORMATION: TITLE: SHEET No. EC No: DATE: MAT SEAL DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED av: PS—33472-000
PRODUCT SPECIFICATION
REVISION:
ECR/ECN INFORMATION:
TITLE:
MX150
DUAL ROW SEALED ASSEMBLY
MAT SEAL
SHEET No.
F10
EC No:
UAU2016-1442
1 of 14
DATE:
3/28/2016
CREATED / REVISED BY:
CHECKED BY:
APPROVED BY:
PS-33472-000
Andy Proffitt
Katy Boruszewski
Vijy Koshy
TEMPLATE FILENAME: ENGINEERING_SPEC[SIZE_A](V.1).DOC
MX150
DUAL ROW SEALED ASSEMBLY
MAT SEAL
D molex“ \_/ 1 2 3 4 5 e 7 8 9 Table of Contents REVISION. ECR/ECN \NFORMATION. TITLE. SHEET No. EC No. DATE. MAT SEAL DOCUMENT NUMBER. CREATED / REVISED av. CHECKED av. APPROVED BY. PS-33472-000
PRODUCT SPECIFICATION
REVISION:
ECR/ECN INFORMATION:
TITLE:
MX150
DUAL ROW SEALED ASSEMBLY
MAT SEAL
SHEET No.
F10
EC No:
UAU2016-1442
2 of 14
DATE:
3/28/2016
CREATED / REVISED BY:
CHECKED BY:
APPROVED BY:
PS-33472-000
Andy Proffitt
Katy Boruszewski
Vijy Koshy
TEMPLATE FILENAME: ENGINEERING_SPEC[SIZE_A](V.1).DOC
Table of Contents
1.0 Scope .................................................................................................................................................... 3
2.0 Product Description................................................................................................................................ 3
2.1. Direct Connect (wire to board application) .......................................................................................... 3
2.2. Inline Applications (wire to wire application) ....................................................................................... 3
2.3. Receptacle Assembly ......................................................................................................................... 4
2.4. Blade Assembly ................................................................................................................................. 4
2.5. Product Name and Series Number ..................................................................................................... 5
3.0 Integral Components and Accessories ................................................................................................... 6
3.1. Integral Components .......................................................................................................................... 6
3.1.1. Receptacle Terminals ................................................................................................................. 6
3.1.2. Blade Terminals ......................................................................................................................... 7
3.1.3. Applicable Wires ........................................................................................................................ 7
3.1.3.1. Wire size ................................................................................................................................ 7
3.1.3.2. ISO Wire ................................................................................................................................. 7
3.1.3.3. SAE Wire ................................................................................................................................ 8
3.1.4. Terminal Service Tool ................................................................................................................ 8
3.2. Accessories ....................................................................................................................................... 8
3.2.1. Wire Harness Retention Clip - Recommended ........................................................................... 8
3.2.2. Backshell - Recommended ......................................................................................................... 8
3.2.3. Cavity (Seal) Plugs ..................................................................................................................... 8
4.0 Applicable Documents and Specifications .............................................................................................. 8
5.0 Ratings .................................................................................................................................................. 9
5.1. Voltage - Operating ............................................................................................................................ 9
5.2. Voltage - Isolation Resistance ............................................................................................................ 9
5.3. Current Rating.................................................................................................................................... 9
5.4. Temperature ...................................................................................................................................... 9
5.5. Sealing ............................................................................................................................................... 9
5.6. Flammability ..................................................................................................................................... 10
5.7. Dielectric Withstand Strength ........................................................................................................... 10
6.0 Performance ........................................................................................................................................ 10
6.1. Electrical Requirements ................................................................................................................... 10
6.2. Mechanical Requirements ................................................................................................................ 11
6.2.1. Mechanical Requirements Deviations ....................................................................................... 12
6.3. Environmental Requirements ........................................................................................................... 13
7.0 Packaging ............................................................................................................................................ 14
8.0 Gages and Fixtures.............................................................................................................................. 14
9.0 Other Information ................................................................................................................................. 14
PS—33472—000 SCOPE PRODUCT DESCRIPTION DIRECTCONNECT \ X KECEWACLEASSEMBLV BLADE ASSEMBLV \ \— RECEPTACLEASSEMBLV REVISION: ECR/ECN INFORMATION: TITLE: SHEET No. EC No: DATE: MAT SEAL DOCUMENT NUMBER: CREATED / REVISED Bv: CHECKED Bv: APPROVED BV:
PRODUCT SPECIFICATION
REVISION:
ECR/ECN INFORMATION:
TITLE:
MX150
DUAL ROW SEALED ASSEMBLY
MAT SEAL
SHEET No.
F10
EC No:
UAU2016-1442
3 of 14
DATE:
3/28/2016
CREATED / REVISED BY:
CHECKED BY:
APPROVED BY:
PS-33472-000
Andy Proffitt
Katy Boruszewski
Vijy Koshy
TEMPLATE FILENAME: ENGINEERING_SPEC[SIZE_A](V.1).DOC
1.0 SCOPE
This product specification covers the 3.50 mm (0.138 inch) centerline (pitch) mat seal dual row
MX150 sealed product line connection system. The MX150 connection system uses crimp
technology.
2.0 PRODUCT DESCRIPTION
2.1. DIRECT CONNECT (WIRE TO BOARD APPLICATION)
2.2. INLINE APPLICATIONS (WIRE TO WIRE APPLICATION)
(é) GROMMFI'CAP CPA FOR DPTIONSSEE BDM OPTIONAL SEE BOM \ \— MAT SEAL \ CONNECTOR HOUSING FOR OPTIONSSEE BUM RING SEAL\ \ TERMINAL POSITION ASSURANCE (TPAJ GROMMETCAP FOR OPTIONS SEE BOM\ CONNECTOR HOUSING FOR OPTIONS SEE BOM\ ~ \ MAT SEAL \ TERMINAL POSITION ASSURANCE (TPA) REVISION: ECR/ECN INFORMATION: TITLE: SHEET No. EC N : DATE: MAT SEAL DOCUMENT NUMBER: CREATED / REVISED Bv: CHECKED Bv: APPROVED av: PS-33472—000
PRODUCT SPECIFICATION
REVISION:
ECR/ECN INFORMATION:
TITLE:
MX150
DUAL ROW SEALED ASSEMBLY
MAT SEAL
SHEET No.
F10
EC No:
UAU2016-1442
4 of 14
DATE:
3/28/2016
CREATED / REVISED BY:
CHECKED BY:
APPROVED BY:
PS-33472-000
Andy Proffitt
Katy Boruszewski
Vijy Koshy
TEMPLATE FILENAME: ENGINEERING_SPEC[SIZE_A](V.1).DOC
2.3. RECEPTACLE ASSEMBLY
2.4. BLADE ASSEMBLY
D molex“ C REVISION. ECR/ECN \NFORMATION. TITLE. SHEET No. EC No. DATE. MAT SEAL DOCUMENT NUMBER. CREATED / REVISED av. CHECKED av. APPROVED BY. PS-33472-000
PRODUCT SPECIFICATION
REVISION:
ECR/ECN INFORMATION:
TITLE:
MX150
DUAL ROW SEALED ASSEMBLY
MAT SEAL
SHEET No.
F10
EC No:
UAU2016-1442
5 of 14
DATE:
3/28/2016
CREATED / REVISED BY:
CHECKED BY:
APPROVED BY:
PS-33472-000
Andy Proffitt
Katy Boruszewski
Vijy Koshy
TEMPLATE FILENAME: ENGINEERING_SPEC[SIZE_A](V.1).DOC
2.5. PRODUCT NAME AND SERIES NUMBER
Refer to listed document number for part availability, dimensions, material, marking information,
packaging information, interface definition, and configuration options etc.
Product Name
Document Number
Series
MX150 Receptacle 2X2 Sealed Assembly
SD-33472-0001 - Assembly Drawing
SD-33472-0002 - Bill of Materials
33472
MX150 Receptacle 2X3 Sealed Assembly
33472 ◊
MX150 Receptacle 2X3 Sealed Assembly with Clipslot
33472 ◊
MX150 Receptacle 2X4 Sealed Assembly
33472
MX150 Receptacle 2X4 Sealed Assembly with Clipslot
33472
MX150 Receptacle 2X6 Sealed Assembly
33472
MX150 Receptacle 2X6 Sealed Assembly with Clipslot
33472
MX150 Receptacle 2X8 Sealed Assembly
33472
MX150 Receptacle 2X10 Sealed Assembly
33472
MX150 Blade 2X2 Sealed Assembly
SD-33482-0001 - Assembly Drawing
SD-33482-0002 - Bill of Materials
33482
MX150 Blade 2X3 Sealed Assembly
33482
MX150 Blade 2X4 Sealed Assembly
33482
MX150 Blade 2X6 Sealed Assembly
33482
MX150 Blade 2X8 Sealed Assembly
33482
MX150 Blade 2X10 Sealed Assembly
33482
◊ See document numbers listed above for connector assembly part numbers without a mat seal.
These part numbers are omitted from PS-33472-000.
/_\ molex“ \_/ 3 INTEGRAL COMPONENTS AND ACCESSORIES @- SD-ssoIz-ooz REVISION. ECR/ECN INFORMATION. TITLE. SHEET ND. EC No. DATE. MAT SEAL DOCUMENT NUMBER. CREATED / REVISED av. CHECKED av. APPROVED BY. PS-33472-000
PRODUCT SPECIFICATION
REVISION:
ECR/ECN INFORMATION:
TITLE:
MX150
DUAL ROW SEALED ASSEMBLY
MAT SEAL
SHEET No.
F10
EC No:
UAU2016-1442
6 of 14
DATE:
3/28/2016
CREATED / REVISED BY:
CHECKED BY:
APPROVED BY:
PS-33472-000
Andy Proffitt
Katy Boruszewski
Vijy Koshy
TEMPLATE FILENAME: ENGINEERING_SPEC[SIZE_A](V.1).DOC
3.0 INTEGRAL COMPONENTS AND ACCESSORIES
Integral components and accessories are sold separately.
3.1. INTEGRAL COMPONENTS
3.1.1. Receptacle Terminals
For crimping information see the Receptacle Terminal Application Specification listed in section 4.0.
Terminal Information
Document
Number
MX150 Receptacle, Mat Seal, High Performance, Sn, M3 Grip Code
SD-33012-002
MX150 Receptacle, Mat Seal, High Performance, Au, M3 Grip Code
MX150 Receptacle, Mat Seal, High Performance, Ag, M3 Grip Code
MX150 Receptacle, Mat Seal, High Performance, Sn, 22 Grip Code
MX150 Receptacle, Mat Seal, High Performance, Au, 22 Grip Code
MX150 Receptacle, Mat Seal, High Performance, Ag, 22 Grip Code
MX150 Receptacle, Mat Seal, High Performance, Sn, 18 Grip Code
MX150 Receptacle, Mat Seal, High Performance, Au, 18 Grip Code
MX150 Receptacle, Mat Seal, High Performance, Ag, 18 Grip Code
MX150 Receptacle, Mat Seal, High Performance, Sn, 14 Grip Code
MX150 Receptacle, Mat Seal, High Performance, Au, 14 Grip Code
MX150 Receptacle, Mat Seal, High Performance, Ag, 14 Grip Code
D PS -33472-000 fl- SD-ssooo-om fl REVISION. ECR/ECN \NFORMATION. TITLE. SHEET No. EC No. DATE. MAT SEAL DOCUMENT NUMBER. CREATED / REVISED av. CHECKED av. APPROVED BY.
PRODUCT SPECIFICATION
REVISION:
ECR/ECN INFORMATION:
TITLE:
MX150
DUAL ROW SEALED ASSEMBLY
MAT SEAL
SHEET No.
F10
EC No:
UAU2016-1442
7 of 14
DATE:
3/28/2016
CREATED / REVISED BY:
CHECKED BY:
APPROVED BY:
PS-33472-000
Andy Proffitt
Katy Boruszewski
Vijy Koshy
TEMPLATE FILENAME: ENGINEERING_SPEC[SIZE_A](V.1).DOC
3.1.2. Blade Terminals
For crimping information see the Blade Terminal Application Specification listed in section 4.0.
Terminal Information
Document
Number
MX150 Blade Mat Seal, High Performance, Sn, M3 Grip Code
SD-33000-001
MX150 Blade Mat Seal, High Performance, Au, M3 Grip Code
MX150 Blade Mat Seal, High Performance, Ag, M3 Grip Code
MX150 Blade Mat Seal, High Performance, Sn, 22 Grip Code
MX150 Blade Mat Seal, High Performance, Au, 22 Grip Code
MX150 Blade Mat Seal, High Performance, Ag, 22 Grip Code
MX150 Blade Mat Seal, High Performance, Sn, 18 Grip Code
MX150 Blade Mat Seal, High Performance, Au, 18 Grip Code
MX150 Blade Mat Seal, High Performance, Ag, 18 Grip Code
MX150 Blade Mat Seal, High Performance, Sn, 14 Grip Code
MX150 Blade Mat Seal, High Performance, Au, 14 Grip Code
MX150 Blade Mat Seal, High Performance, Ag, 14 Grip Code
3.1.3. Applicable Wires
3.1.3.1. Wire size
See section 5.5 for wire range recommended per circuit size.
3.1.3.2. ISO Wire
Per the listed wire specifications where the insulation diameter is within 1.20mm to 2.40mm.
- GMW15626 February 2008
- ES-AU5T-1A348-AA Rev D
D molex“ C 4 SD-34345-001 APPLICABLE DOCUMENTS AND SPECIFICATIONS AS-33472-100 PS-33012-002 AS-33012-002 AS-33000-001 TS-33472—0001 F'S-34646-001 AS-33611-001 REVISION. ECR/ECN INFORMATION. TITLE. SHEET NO. EC NO. DATE. MAT SEAL DOCUMENT NUMBER. CREATED / REVISED av. CHECKED av. APPROVED BY. PS-33472-000
PRODUCT SPECIFICATION
REVISION:
ECR/ECN INFORMATION:
TITLE:
MX150
DUAL ROW SEALED ASSEMBLY
MAT SEAL
SHEET No.
F10
EC No:
UAU2016-1442
8 of 14
DATE:
3/28/2016
CREATED / REVISED BY:
CHECKED BY:
APPROVED BY:
PS-33472-000
Andy Proffitt
Katy Boruszewski
Vijy Koshy
TEMPLATE FILENAME: ENGINEERING_SPEC[SIZE_A](V.1).DOC
3.1.3.3. SAE Wire
Per the listed wire specifications where the insulation diameter is within 1.50mm to 2.69mm.
- ESB-ML123-A 2003
- SAE J1128 Dec 2005
3.1.4. Terminal Service Tool
See the Connector Application Specification listed in section 4.0.
3.2. ACCESSORIES
3.2.1. Wire Harness Retention Clip - Recommended
For further information contact your sales engineer.
3.2.2. Backshell - Recommended
For availability and part numbers see the Assembly Drawing and the Bill of Materials Drawing listed in
section 2.5.
3.2.3. Cavity (Seal) Plugs
*Seal plugs are not to be used to replace shorting bar terminals.
Information
Description
Document
Number
MX150 Cavity Plug, Natural
34345-0001
SD-34345-001
4.0 APPLICABLE DOCUMENTS AND SPECIFICATIONS
Document Title
Document Number
UL File Number
Not Applicable
CSA File Number
Not Applicable
TUV License number
Not Applicable
IMDS Report
Available upon request
Environmental Compliance
Available on molex.com
Connector Application Specification
AS-33472-100
Terminal Product Specification
PS-33012-002
Receptacle Terminal Application Specification
AS-33012-002
Blade Terminal Application Specification
AS-33000-001
Connector Test Summary
TS-33472-0001
PLR Transit Related Product Specification
PS-34646-001
MX150 CPA Installation Guide
AS-33611-001
/_\ 5 RATINGS M g REVISION. ECR/ECN \NFORMATION. TITLE. SHEET No. EC No. DATE. MAT SEAL DOCUMENT NUMBER. CREATED / REVISED av. CHECKED av. APPROVED BY. PS -33472-000
PRODUCT SPECIFICATION
REVISION:
ECR/ECN INFORMATION:
TITLE:
MX150
DUAL ROW SEALED ASSEMBLY
MAT SEAL
SHEET No.
F10
EC No:
UAU2016-1442
9 of 14
DATE:
3/28/2016
CREATED / REVISED BY:
CHECKED BY:
APPROVED BY:
PS-33472-000
Andy Proffitt
Katy Boruszewski
Vijy Koshy
TEMPLATE FILENAME: ENGINEERING_SPEC[SIZE_A](V.1).DOC
5.0 RATINGS
5.1. VOLTAGE - OPERATING
Operating Voltage: 14 Volts DC Maximum
5.2. VOLTAGE - ISOLATION RESISTANCE
100MΩ Minimum when 500 Volts DC between adjacent terminals and terminals to ground.
5.3. CURRENT RATING
See the Terminal Product Specification listed in section 4.0.
5.4. TEMPERATURE
Non-operating: - 40 Cº to + 125 Cº
Operating: - 40 Cº to + 125 Cº
5.5. SEALING
- Meets IP67
- Meets IPx9K when the following configuration is used.
- With CPA
- With Backshell
- With Convoluted Conduit
Circuit
Size
Part
Numbers
Wire Range
2x2
ALL
except
33472-04XX
33472-44XX
33482-04XX
33482-44XX
1.20-2.69 mm
(0.0470.106 in)
2X3
ALL
2X4
2X6
2X8
2X10
33482-21xx
33482-2999
33472-2xxx
2X2
33472-04XX
33472-44XX
33482-04XX
33482-44XX
1.40-2.69 mm
(0.0550.106 in)
2X10
33482-20xx
See document numbers listed in section 2.5 for connector assembly part numbers without a mat
seal. These part numbers are omitted from PS-33472-000.
D molex“ C 6 PERFORMANCE REVISION. ECR/ECN \NFORMATION. TITLE. SHEET No. EC No. DATE. MAT SEAL DOCUMENT NUMBER. CREATED / REVISED av. CHECKED av. APPROVED BY. PS-33472-000
PRODUCT SPECIFICATION
REVISION:
ECR/ECN INFORMATION:
TITLE:
MX150
DUAL ROW SEALED ASSEMBLY
MAT SEAL
SHEET No.
F10
EC No:
UAU2016-1442
10 of 14
DATE:
3/28/2016
CREATED / REVISED BY:
CHECKED BY:
APPROVED BY:
PS-33472-000
Andy Proffitt
Katy Boruszewski
Vijy Koshy
TEMPLATE FILENAME: ENGINEERING_SPEC[SIZE_A](V.1).DOC
- Product Performance Is Based On Connector Requirements Per GMW3191 Dec 2007
- Sealing Performance
Backshells are one time use only. This condition may cause reduced backshell retention post-
test.
5.6. FLAMMABILITY
The burn rate of the plastic material when tested to ISO 3795 shall not exceed 100 mm/min.
5.7. DIELECTRIC WITHSTAND STRENGTH
Connectors withstand 1500V AC between adjacent terminals for 1 minute.
Test performed with the following conditions.
- MX150 2X4 Connector
- JIS C5402 5.1/MIL-STD-202 Method 301
- UL1007 AWG18
6.0 PERFORMANCE
- Additional circuit sizes added to the product family are validated per USCAR-2 Rev. 4 Appendix D.
6.1. ELECTRICAL REQUIREMENTS
ITEM
DESCRIPTION
TEST CONDITION
REQUIREMENT
1
Contact
Resistance
(Low Level)
Mate connectors: limiting the open circuit
voltage of 20 mV and a maximum current of
100 mA.
10 milliohms
MAXIMUM
2
Contact
Resistance
@ Rated Current
(Voltage Drop)
Mate connectors: apply a 5 ampere/ 1.0 mm2
current
10 milliohms
MAXIMUM
3
Isolation
Resistance
Apply a voltage of 500 VDC between
adjacent terminals and between terminals to
ground.
20 Meg ohms
MINIMUM
4
Temperature
Rise
(via Current Cycling)
Mate terminals: measure the temperature
rise at the rated current after:
1008 hours of bench top testing
(45 minutes ON and 15 minutes OFF per
hour).
Temperature rise over
Ambient:
+55 Cº MAXIMUM
Circuit
Size
Operating Conditions
Additional Required
Component
1x2
Sealing Class III
Temperature Class III
Convolute
CPA
D molex“ C REVISION. ECR/ECN \NFORMATION. TITLE. SHEET No. EC No. DATE. MAT SEAL DOCUMENT NUMBER. CREATED / REVISED av. CHECKED av. APPROVED BY. PS-33472-000
PRODUCT SPECIFICATION
REVISION:
ECR/ECN INFORMATION:
TITLE:
MX150
DUAL ROW SEALED ASSEMBLY
MAT SEAL
SHEET No.
F10
EC No:
UAU2016-1442
11 of 14
DATE:
3/28/2016
CREATED / REVISED BY:
CHECKED BY:
APPROVED BY:
PS-33472-000
Andy Proffitt
Katy Boruszewski
Vijy Koshy
TEMPLATE FILENAME: ENGINEERING_SPEC[SIZE_A](V.1).DOC
6.2. MECHANICAL REQUIREMENTS
ITEM
DESCRIPTION
TEST CONDITION
REQUIREMENT
5
Connector Mate/
Unmate Forces
Mate and unmate connector (male to female)
at a rate of 50 ± 6 mm (2 ± ¼ inch) per
minute.
75 Newtons MAXIMUM
Unmate 110 Newtons
MINIMUM
6
Terminal
Retention Force
(in Housing)
Axial pullout force on the terminal in the
housing at a rate of 50 ± 6 mm (2 ± ¼ inch)
per minute.
90 Newtons MINIMUM
7
Terminal
Insertion Force
(into Housing)
Apply an axial insertion force on the terminal
at a rate of 50 ± 6 mm (2 ± ¼ inch) per
minute.
30 Newtons MAXIMUM
8
Connector Audible
Feedback
The connector lock must provide audible
feedback during connector mating at a rate
of 50 ± 6 mm (2 ± ¼ inch) per minute.
7dB over Ambient (C scale)
9
Polarization Feature
Effectiveness
Connector must be polarized to prevent
mating with similar connectors or incorrect
orientation
220 Newtons MINIMUM
10
Terminal Position
Assurance (TPA)
Insertion Force (into
housing)
The force to insert the TPA from the preload
(as shipped) position to the final position at a
rate of 50 ± 6 mm (2 ± ¼ inch) per minute.
60 Newtons MAXIMUM
11
Terminal Position
Assurance (TPA)
Extraction Force (in
housing)
The force to extract the TPA from the final
position to the preload position (as shipped)
at a rate of 50 ± 6 mm (2 ± ¼ inch) per
minute.
60 Newtons MAXIMUM
12
Connector Position
Assurance (CPA)
Insertion Force (into
housing)
The force to insert the CPA from the preload
(as shipped) position to the final position at a
rate of 50 ± 6 mm (2 ± ¼ inch) per minute.
40 Newtons MINIMUM
(unmated)
15 Newtons MAXIMUM
(fully mated)
13
Connector Position
Assurance (CPA)
Extraction Force (in
housing)
The force to extract the CPA from the final
position to the preload position at a rate of
50 ± 6 mm (2 ± ¼ inch) per minute.
60 Newtons MAXIMUM
14
Locator Clip
Insertion Force (in
housing)
The force to insert the locator clip to the final
(as shipped) position at a rate of 50 ± 6 mm
(2 ± ¼ inch) per minute.
30 Newtons MAXIMUM
15
Locator Clip
Extraction Force (in
housing)
The force to extract the locator clip from the
final (as shipped) position to out at a rate of
50 ± 6 mm (2 ± ¼ inch) per minute.
110 Newtons MINIMUM
D molex“ C REVISION. ECR/ECN \NFORMATION. TITLE. SHEET No. EC No. DATE. MAT SEAL DOCUMENT NUMBER. CREATED / REVISED av. CHECKED av. APPROVED BY. PS-33472-000
PRODUCT SPECIFICATION
REVISION:
ECR/ECN INFORMATION:
TITLE:
MX150
DUAL ROW SEALED ASSEMBLY
MAT SEAL
SHEET No.
F10
EC No:
UAU2016-1442
12 of 14
DATE:
3/28/2016
CREATED / REVISED BY:
CHECKED BY:
APPROVED BY:
PS-33472-000
Andy Proffitt
Katy Boruszewski
Vijy Koshy
TEMPLATE FILENAME: ENGINEERING_SPEC[SIZE_A](V.1).DOC
6.2.1. Mechanical Requirements Deviations
ITEM
DESCRIPTION
TEST CONDITION
CKT
BLADE/
RCPT
REQUIREMENT
7
Terminal
Insertion Force for
Wire Diameter above
2.5mm not
exceeding 2.69mm
(into Housing)
Apply an axial insertion force on the
terminal at a rate of 50 ± 6 mm (2 ± ¼
inch) per minute.
ALL
BLADE
45 Newtons
MAXIMUM
RCPT
40 Newtons
MAXIMUM
10
Terminal Position
Assurance (TPA)
Insertion Force (into
housing)
The force to insert the TPA from the
preload (as shipped) position to the final
position at a rate of 50 ± 6 mm (2 ± ¼
inch) per minute.
2X2
RCPT
90 Newtons
MAXIMUM
11
Terminal Position
Assurance (TPA)
Extraction Force (in
housing)
The force to extract the TPA from the
final position to the preload position (as
shipped) at a rate of 50 ± 6 mm (2 ± ¼
inch) per minute.
2X2
RCPT
90 Newtons
MAXIMUM
2X3
130 Newtons
MAXIMUM
2x4
2X10
BLADE
75 Newtons
MAXIMUM
RCPT
130 Newtons
MAXIMUM
13
Connector Position
Assurance (CPA)
Extraction Force (in
housing)
The force to extract the CPA from the
final position to the preload position at a
rate of 50 ± 6 mm (2 ± ¼ inch) per
minute.
ALL
RCPT
40 Newtons
MAXIMUM
3 Newtons
MINIMUM
D molex“ C Temgerature CB Duration Minutes REVISION. ECR/ECN \NFORMATION. TITLE. SHEET No. EC No. DATE. MAT SEAL DOCUMENT NUMBER. CREATED / REVISED av. CHECKED av. APPROVED BY. PS-33472-000
PRODUCT SPECIFICATION
REVISION:
ECR/ECN INFORMATION:
TITLE:
MX150
DUAL ROW SEALED ASSEMBLY
MAT SEAL
SHEET No.
F10
EC No:
UAU2016-1442
13 of 14
DATE:
3/28/2016
CREATED / REVISED BY:
CHECKED BY:
APPROVED BY:
PS-33472-000
Andy Proffitt
Katy Boruszewski
Vijy Koshy
TEMPLATE FILENAME: ENGINEERING_SPEC[SIZE_A](V.1).DOC
6.3. ENVIRONMENTAL REQUIREMENTS
ITEM
DESCRIPTION
TEST CONDITION
REQUIREMENT
16
Field Correlated Life
Test (FCLT)
Mate connectors up to 1 cycle and expose to
environment per SAE/USCAR-20.
20 milliohms MAXIMUM
17
Durability
Mate connectors up to 10 cycles prior to
environmental tests.
10 milliohms MAXIMUM
&
Discontinuity < 1 microsecond
18
Thermal Shock
(Electrical)
Mate connectors per durability; expose to
100 cycles of:
Temperature C° Duration (Minutes)
-40 +0/-3 30
+125 +3/-0 30
10 milliohms MAXIMUM
&
Discontinuity < 1 microsecond
19
High Temperature
Exposure
(Sealing)
Mate connectors per durability and expose to
1008 hours at 125 ± 2°C
28 kPa for 15 seconds
MINIMUM pressure/vacuum
&
Submersion for 30 minutes
&
Isolation Resistance of 20 Meg
ohms @ 500 VDC MINIMUM
20
Temperature/
Humidity
(Sealing)
Mate connectors per durability and expose
connector system to forty 8-hour cycles of
combined heating and humidity exposure
40 ºC and 125 ºC at 0% to 90% RH
28 kPa for 15 seconds
MINIMUM pressure/vacuum
&
Submersion for 30 minutes
&
Isolation Resistance of 20 Meg
ohms @ 500 VDC MINIMUM
21
Fluid Resistance
(Sealing)
Submerge connector assemblies in the
following fluids: gasoline, *diesel fuel, engine
oil, ethanol, power steering fluid, automatic
transmission fluid, engine coolant, and brake
fluid.
Submersion for 30 minutes
&
Isolation Resistance of 20 Meg
ohms @ 500 VDC MINIMUM
22
Vibration/
Mechanical Shock
(Electrical)
Mate connectors per durability. Connector
assembly shall be vibrated for (8 hours /
axes @ 12.1 Grms, 10 shocks @ 35 Gs /
axes) Coupled to engine.
10 milliohms MAXIMUM
&
Discontinuity < 1 microsecond
* Silicone seals swell in the presence of gasoline and diesel fuel. This condition may cause excessive connector
mate/unmate forces and/or reduce the Grommet Cap retention.
/_\ molex“ \_/ 7 8 9 PACKAGING GAG ES AND FIXTURES OTHER INFORMATION REVISION. ECR/ECN‘NFORMATION. TITLE. EC No. DATE. MAT SEAL SHEET No. DOCUMENT NUMBER. CREATED/REVISED EV. CHECKED EV. APPROVED BY. PS-33472-000
PRODUCT SPECIFICATION
REVISION:
ECR/ECN INFORMATION:
TITLE:
MX150
DUAL ROW SEALED ASSEMBLY
MAT SEAL
SHEET No.
F10
EC No:
UAU2016-1442
14 of 14
DATE:
3/28/2016
CREATED / REVISED BY:
CHECKED BY:
APPROVED BY:
PS-33472-000
Andy Proffitt
Katy Boruszewski
Vijy Koshy
TEMPLATE FILENAME: ENGINEERING_SPEC[SIZE_A](V.1).DOC
7.0 PACKAGING
- Molex packaging drawing numbers are located on the Assembly Drawing listed in section 2.5.
- Parts should be packaged to protect against damage during handling, transit and storage.
8.0 GAGES AND FIXTURES
All applicable gages and fixtures are referenced in the appropriate control plans.
9.0 OTHER INFORMATION
- Products confirm to USCAR-2 class III environment.
- ◊ See document numbers listed in section 2.5 for connector assembly part numbers without a mat
seal. These part numbers are omitted from PS-33472-000.
- To add new knock out patterns contact your sales engineer.
MOLEX REPRESENTS AND WARRANTS TO BUYER FOR A PERIOD OF ONE (1) YEAR FROM THE DATE OF DELIVERY OF THE PRODUCTS TO
BUYER THAT
1) THE PRODUCTS SHALL CONFORM TO THE MOLEX SPECIFICATIONS FOR THE PRODUCTS IN FORCE AT THE DATE OF DELIVERY OF THE
PRODUCTS TO BUYER, AND
2) THE PRODUCTS SHALL BE OF FREE FROM MATERIAL DEFECTS IN MATERIALS AND MANUFACTURING.
EXCEPT AS EXPRESSLY PROVIDED ABOVE, MOLEX MAKES NO WARRANTY, EXPRESS OR IMPLIED, REGARDING THE PRODUCTS. ALL IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY
DISCLAIMED. IN ADDITION, MOLEX EXPRESSLY DISCLAIMS ANY WARRANTY OBLIGATIONS IN THOSE INSTANCES WHERE THE FAILURES
RESULTED FROM THE MODIFICATION OF THE PRODUCTS BY BUYER OR ITS CUSTOMERS, IMPROPER HANDLING, USE OR INSTALLATION OF
THE PRODUCTS BY BUYER OR ITS CUSTOMERS, OR ANY OTHER CAUSE BEYOND THE CONTROL OF MOLEX.

Products related to this Datasheet

CONN PLUG 6POS DUAL BLACK
CONN RCPT 1.5 2X4 CPA LT GY B/8
CONN RCPT HSG 4POS 3.50MM
CONN PLUG ASST 12POS DUAL BLACK
CONN PLUG HSG 4POS 3.50MM
CONN PLUG HSG 6POS 3.50MM
CONN PLUG HSG 12POS 3.50MM
CONN RCPT 1.5 2X4 CPA BLACK A/8
CONN PLUG 8POS DUAL BLACK
CONN PLUG 16POS DUAL BLACK
CONN RCPT 1.5 2X4 CS BLACK A/8
CONN RCPT HSG 4POS 3.50MM
CONN PLUG HSG 4POS 3.50MM
CONN RCPT HSG 4POS 3.50MM
CONN RCPT HSG 8POS 3.50MM
CONN PLUG HSG 20POS 3.50MM
CONN PLUG HSG 20POS 3.50MM
CONN PLUG HSG 12POS 3.50MM
CONN PLUG 4POS DUAL BLACK
CONN PLUG 6POS DUAL BLACK
CONN PLUG 8POS DUAL BLACK
CONN PLUG 12POS DUAL BLACK
CONN PLUG 16POS DUAL BLACK
CONN PLUG 20POS DUAL BLACK
CONN PLUG 4POS DUAL LTGRAY
CONN PLUG 8POS DUAL LTGRAY
CONN PLUG 12POS DUAL LTGRAY
CONN PLUG 16POS DUAL LTGRAY
CONN PLUG 20POS DUAL LTGRAY
CONN PLUG HSG 6POS 3.50MM