MX150 Series Prod Spec Datasheet by Molex

View All Related Products | Download PDF Datasheet
TABLE OF CONTENTS REVISION. ECR/ECN‘NFORMATION: EC No DATE: TITLE. SHEET N0. DOCUMENT NUMBER: PS-34083-002 CREATED / REVISED BV. CHECKED BV. APPROVED BY
PRODUCT SPECIFICATION
REVISION: ECR/ECN INFORMATION: TITLE:
MX150 SINGLE WIRE SEAL TERMINAL
PRODUCT SPECIFICATION
SHEET No.
A
EC No:
UAU2014-1432
1
of
6
DATE:
2014 / 03 / 12
DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY:
PS
-
3
4083
-
002
A. Dhir M. Vanslambrouck B.Moser
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.2).DOC
TABLE OF CONTENTS
1.0 Scope
2.0 Product Description
2.1 Product Name and Related Parts
2.2 Dimensions, Materials, Platings and Markings
2.3 Features and Benefits
3.0 Applicable Documents and Specifications
4.0 Safety Agency Approvals
5.0 Ratings / Performance / Validation
6.0 Packaging
7.0 Gages and Fixtures
8.0 Other Information/Miscellaneous
molex MX150 SINGLE WIRE SEAL RECEPTACLE AND BLADE TERMINALS Receptacle Terminal REVISION: ECRIECN INFORMATION: TITLE: SHEET No. EC No: DATE: DOCUMENT NUMBER: CREATED I REVISED BY: CHECKED BY: APPROVED BY: PS-34083-002
PRODUCT SPECIFICATION
REVISION: ECR/ECN INFORMATION: TITLE:
MX150 SINGLE WIRE SEAL TERMINAL
PRODUCT SPECIFICATION
SHEET No.
A
EC No:
UAU2014-1432
2
of
6
DATE:
2014 / 03 / 12
DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY:
PS
-
3
4083
-
002
A. Dhir M. Vanslambrouck B.Moser
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.2).DOC
MX150 SINGLE WIRE SEAL RECEPTACLE AND BLADE TERMINALS
1.0 SCOPE
This Product Specification covers the MX150 Single Wire Seal Receptacle and Blade terminals
crimped to an array of wires utilizing crimp technology.
2.0 PRODUCT DESCRIPTION
2.1 PRODUCT NAME AND ATTRIBUTES
Terminal
Family Gender Sealing Plating Grip Code Special Characteristics Current
Rating
MX150 Receptacle Single Wire seal Sn 22 High Performance Sn 12.5A
MX150
Receptacle Single Wire seal Au 22 High Performance Au
12.5A
MX150
Receptacle Single Wire seal Ag 22 High Performance Ag
12.5A
MX150
Receptacle Single Wire seal Sn 18 High Performance Sn 16.5A
MX150
Receptacle Single Wire seal Au 18 High Performance Au
16.5A
MX150
Receptacle Single Wire seal Ag 18 High Performance Ag
16.5A
MX150
Receptacle Single Wire seal Sn 14 High Performance Sn 21A
MX150
Receptacle Single Wire seal Au 14 High Performance Au
21A
MX150
Receptacle Single Wire seal Ag 14 High Performance Ag
21A
MX150
Blade Single Wire seal Sn 22 High Performance Sn 12.5A
MX150
Blade
Single Wire seal
Au 22 High Performance Au
12.5A
MX150
Blade
Single Wire seal
Ag 22 High Performance Ag
12.5A
MX150
Blade
Single Wire seal
Sn 18 High Performance Sn 17A
MX150
Blade
Single Wire seal
Au 18 High Performance Au
17A
MX150
Blade
Single Wire seal
Ag 18 High Performance Ag
17A
MX150
Blade
Single Wire seal
Sn 14 High Performance Sn 21A
MX150
Blade
Single Wire seal
Au 14 High Performance Au
21A
MX150
Blade
Single Wire seal
Ag 14 High Performance Ag
21A
Receptacle
Blade Terminal
REVISION. ECR/ECN‘NFORMATION. EC No DATE. TITLE. SHEET N0. DOCUMENT NUMBER. PS-34083-002 CREATED / REVISED BV. CHECKED BV. APPROVED BY
PRODUCT SPECIFICATION
REVISION: ECR/ECN INFORMATION: TITLE:
MX150 SINGLE WIRE SEAL TERMINAL
PRODUCT SPECIFICATION
SHEET No.
A
EC No:
UAU2014-1432
3
of
6
DATE:
2014 / 03 / 12
DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY:
PS
-
3
4083
-
002
A. Dhir M. Vanslambrouck B.Moser
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.2).DOC
2.2 DIMENSIONS, MATERIALS, PLATINGS AND MARKINGS
All dimensions, terminal materials, plating descriptions and ID locations can be found on the
applicable sales drawing.
2.3 FEATURES AND BENEFITS
High performance copper alloy
One piece terminal design
Molex cavity compatible
High current carrying capability
Validated to USCAR-21 crimp performance requirements across a wide array of wires
Validated to USCAR-2 terminal performance requirements
3.0 APPLICABLE DOCUMENTS AND SPECIFICATIONS
4.0 SAFETY AGENCY APPROVALS
Description Document Number
Receptacle Blade
Sales Drawing SD-34083-002 SD-34080-001
Application Specification
(Crimp) AS-34083-002 AS-34080-001
Packaging Specification PK-31300-516
Agency Approval Status
CSA File Number Not Applicable
TUV License number Not Applicable
UL File Number Not Applicable
IMDS Available upon request
Environmental Compliance Available on molex.com
1‘ USCAR DERATI NG CURVE current Carrying capaevty curve MX‘SO Receptacle“: Blade. 1mg Io 2mg "SCAR-2 Revl section 53.3 22 m w u V2 _/ / m mmm (Amfllrel) —14awg Deranng cmve 7 1 sawg Derahng cuwe — 1aawg Devanng Cuwe i Zoawg oeranng Cuwe 7 223m) Deranng Curve z: .45 .5 up 5:: .5 a: 5:. m: u: m u, v0.1 Alumni Iempemmm 1°C) REVISION: ECRIECN‘NFORMATION: TITLE: SHEETNO. ECN DATE: DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY: PS-34083-002
PRODUCT SPECIFICATION
REVISION: ECR/ECN INFORMATION: TITLE:
MX150 SINGLE WIRE SEAL TERMINAL
PRODUCT SPECIFICATION
SHEET No.
A
EC No:
UAU2014-1432
4
of
6
DATE:
2014 / 03 / 12
DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY:
PS
-
3
4083
-
002
A. Dhir M. Vanslambrouck B.Moser
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.2).DOC
5.0 RATINGS / PERFORMANCE / VALIDATION
5.1 ELECTRICAL
Item Description Condition Rating
5.1.1
Operating Voltage Applied voltage during operation 14 Volts DC Maximum
5.1.2
Crimp Resistance Post environment crimp resistance
Change in crimp resistance ≤
0.33mor ≤ 0.55m crimp
resistance.
5.1.3 TERMINAL CURRENT DERATING CURVES
This test is used to determine the maximum test current at which a terminal system
can operate in a room temperature environment before excessive thermal
degradation and/or resistance begins to occur. Temperature Rise (Y axis) vs.
Current (X axis) shall be plotted for each applicable conductor size.
CAUTION: These graphs are NOT to be used for actual terminal application in a vehicle. This test is conducted
on terminals alone, thus eliminating the variation that may be introduced by variations in the heat dissipating
characteristics of differing connector housing designs and sizes. This test cannot establish the Maximum Current
Capability of a specific terminal application. For specific applications, several factors other than current load must
be considered (see SAE/USCAR-2 appendix F for more information).
5.1.3.1 SAE WIRES TERMINAL
USCAR DERATING CURVE
2m nu ma mu 15a ('Irmnl (Amrru) w m an 25 35 As USCAR DERATI NG CURVE Currenl Cnrrylng Capmty Cum Mxlso Recepndz In Blade, Lanna/‘1 lo (ms-mun lJSCARVZ Re“. 5 Section 5.3.3. 55 55 75 as 95 hum Iflllflnmw (<0 ms="" ns="" ns="" sn="" plated="" terminal="" au="" 8.="" ag="" sn="" plated="" terminals="" in»...="" idtuingcinr="" 7="" u="" a...="" ldflnngc-xu="" ilium="" :1)...“ch="" ill-3......="" zdmmgcune="" n="" 50......="" mums“...="" in="" 35mm="" :nmuxgcum="" 135="" ms="" revision.="" ec="" no="" date:="" ecr/ecn="" information:="" title.="" sheet="" n0.="" document="" number:="" ps-34083-002="" created="" revised="" by.="" checked="" by.="" approved="" by="">
PRODUCT SPECIFICATION
REVISION: ECR/ECN INFORMATION: TITLE:
MX150 SINGLE WIRE SEAL TERMINAL
PRODUCT SPECIFICATION
SHEET No.
A
EC No:
UAU2014-1432
5
of
6
DATE:
2014 / 03 / 12
DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY:
PS
-
3
4083
-
002
A. Dhir M. Vanslambrouck B.Moser
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.2).DOC
5.1.3.2 ISO WIRES TERMINAL
USCAR DERATING CURVE
5.2 TEMPERATURE
Sn Plated Terminal
Non-operating temperature: - 40°C to +125°C
Operating temperature: - 40°C to +125°C
Au & Ag Sn Plated Terminals
Non-operating temperature: - 40°C to +155°C
Operating temperature: - 40°C to +155°C
**For terminal validation information contact your Molex Sales Engineer
**For connector system level performance see related product specification
6.0 PACKAGING
Parts are packaged to protect against damage during handling, transit and storage. Please refer to PK-
31300-516 reel wind direction. Terminals on reels should be stored in original packaging until ready for
use. Storage temperature is recommended between 65 and 95°F (18 and 35°C) and storage humidity
at less than 85% relative humidity. Under these conditions Molex recommended shelf life is 12 months
from manufacturing date on terminal reel.
REVISION. ECR/ECN‘NFORMATION: EC No DATE: TITLE. SHEET N0. DOCUMENT NUMBER: PS-34083-002 CREATED / REVISED BV. CHECKED BV. APPROVED BY
PRODUCT SPECIFICATION
REVISION: ECR/ECN INFORMATION: TITLE:
MX150 SINGLE WIRE SEAL TERMINAL
PRODUCT SPECIFICATION
SHEET No.
A
EC No:
UAU2014-1432
6
of
6
DATE:
2014 / 03 / 12
DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY:
PS
-
3
4083
-
002
A. Dhir M. Vanslambrouck B.Moser
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.2).DOC
7.0 GAGES AND FIXTURES
Gages and Fixtures are referenced in the appropriate control plans of the receptacle terminals. For
terminal electrical checking, please refer to the related connector application specification.
8.0 OTHER INFORMATION / MISCELLANEOUS
MOLEX REPRESENTS AND WARRANTS TO BUYER FOR A PERIOD OF ONE (1) YEAR FROM THE DATE OF DELIVERY OF THE PRODUCTSTHAT:
1) THE PRODUCTS SHALL CONFORM TO THE MOLEX SPECIFICATIONS FOR THE PRODUCTS IN FORCE AT THE DATE OF DELIVERY OF THE
PRODUCTS TO BUYER, AND
2) THE PRODUCTS SHALL BE FREE FROM DEFECTS IN MATERIALS AND MANUFACTURING.
EXCEPT AS EXPRESSLY PROVIDED ABOVE, MOLEX MAKES NO WARRANTY, EXPRESS OR IMPLIED, REGARDING THE PRODUCTS. ALL IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY
DISCLAIMED. IN ADDITION, MOLEX EXPRESSLY DISCLAIMS ANY WARRANTY OBLIGATIONS IN THOSE INSTANCES WHERE THE FAILURES
RESULTED FROM THE MODIFICATION OF THE PRODUCTS BY BUYER OR ITS CUSTOMERS, IMPROPER HANDLING, USE OR INSTALLATION OF THE
PRODUCTS BY BUYER OR ITS CUSTOMERS, OR ANY OTHER CAUSE BEYOND THE CONTROL OF MOLEX.

Products related to this Datasheet

CONN PIN 22AWG CRIMP TIN
CONN SOCKET 14-16AWG CRIMP TIN
CONN PIN 18-20AWG CRIMP SILVER
CONN SOCKET 14-16AWG CRIMP TIN
CONN PIN 14-16AWG CRIMP TIN
CONN SOCKET 22AWG CRIMP TIN
CONN PIN 14-16AWG CRIMP TIN
CONN PIN 22AWG CRIMP SILVER
CONN PIN 18-20AWG CRIMP TIN
CONN PIN 18-20AWG CRIMP SILVER
CONN PIN 22AWG CRIMP TIN
CONN PIN 22AWG CRIMP TIN
CONN PIN 22AWG CRIMP TIN
CONN PIN 18-20AWG CRIMP TIN
CONN SOCKET 18-20AWG CRIMP TIN
CONN SOCKET 18-20AWG CRIMP TIN
CONN SOCKET 22AWG CRIMP TIN
CONN PIN 18-20AWG CRIMP TIN
CONN PIN 14-16AWG CRIMP TIN
CONN PIN 22AWG CRIMP SILVER
CONN PIN 14-16AWG CRIMP TIN
CONN SOCKET 22AWG CRIMP TIN
CONN SOCKET 14-16AWG CRIMP TIN
CONN PIN 18-20AWG CRIMP SILVER
CONN SOCKET 18-20AWG CRIMP TIN
CONN SOCKET 18-20AWG CRIMP TIN
CONN SOCKET 22AWG CRIMP TIN
CONN PIN 18-20AWG CRIMP TIN
CONN PIN 14-16AWG CRIMP GOLD
CONN PIN 18-20AWG CRIMP GOLD