ATA Series Prod Spec Datasheet by Molex

View All Related Products | Download PDF Datasheet
) molexfl \_/ TITLE SERIAL ATA POWER CONNECTOR / 1.27mm PITCH REVISTON: ECR/ECN INFORMATION: TITLE: SHEET No. EC No: DATE: DOCUMENT NUMBER: CREATED / REVISED BV: CHECKED BY: APPROVED BY: Grate Ma
PRODUCT SPECIFICATION
REVISION: ECR/ECN INFORMATION: SHEET No.
EC No: SH2005-0052
B DATE: 2004/08/10
TITLE: SERIAL ATA POWER CONNECTOR
1.27mm PITCH
1 of 5
DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY:
PS-67490-002 Grate Ma 2004/08/10
Grate Ma
2004/08/10 Vincent 2004/08/10
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1). DOC
TITLE
SERIAL ATA POWER CONNECTOR / 1.27mm PITCH
1.0 SCOPE
This Product Specification covers the mechanical, electrical and environmental performances
requirements and test methods for Serial-ATA connector series products.
2.0 APPLICABLE DOCUMENTS AND SPECIFICATIONS
The following documents form a part of this specification to the extent specified herewith. In
the event of conflict between the requirements of the specification and the product drawing, the
product drawing shall take precedence. In the event of conflict between the requirements of the
specification and the referenced documents, this specification shall take precedence.
2.1 EIA 364 Test Methods for Electronic and Electrical Component Parts
2.2 Serial ATA / High Speed Serialized at Attachment Specification
3.0 MATERIAL SPECIFICATIONS
3.1 Design and Construction
Connector shall be of the design, construction and physical dimensions specified on the
applicable sales drawing.
3.2 Materials
a) Contacts: Refer to respective Molex sales & engineering drawings
b) Housing: Refer to respective Molex sales & engineering drawings
c) Plating: Refer to respective Molex sales & engineering drawings
4.0 PERFORMANCE AND TEST DESCRIPTION
4.1 Performance requirement:
Connector shall be designed to meet the electrical, mechanical and environmental
performances requirements specified in 5.0
4.2 VOLTAGE:
15V DC
4.3 CURRENT:
1.5A DC @25 C
4.4 TEMPERATURE
Operating Temperature Range: -35 C to +85 C (Without loss function)
Storage Temperature Range: -35 C to +85 C (Without loss function)
) molexfl C REVISTON: ECR/ECN INFORMATION: EC No DATE TITLE: SHEET N0. DOCUMENT NUMBER CREATED / REVISED BV: CHECKED BY: APPROVED BY Grate Ma
PRODUCT SPECIFICATION
REVISION: ECR/ECN INFORMATION: SHEET No.
EC No: SH2005-0052
B DATE: 2004/08/10
TITLE: SERIAL ATA POWER CONNECTOR
1.27mm PITCH
2 of 5
DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY:
PS-67490-002 Grate Ma 2004/08/10
Grate Ma
2004/08/10 Vincent 2004/08/10
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1). DOC
5.0 Test Requirements and Procedures.
5.1 ELECTRICAL REQUIREMENTS
DESCRIPTION TEST CONDITION REQUIREMENT
5.1.
1 Insulation
Resistance
EIA 364-21
After 500 VDC for 1 minute, measure the
insulation resistance between the adjacent
contacts of mated and unmated connector
assemblies.
1000 Mega ohms MINIMUM
5.1.
2
Dielectric
Withstanding
Voltage
EIA 364-20 Method B
Test between adjacent contacts of mated
and unmated connector assemblies.
The dielectric shall withstand
500 VAC for 1 minute sea level
5.1.
3
Contact
Resistance
(LLCR)
EIA 364-23
Subject mated contacts assembled in
housing to 20 mV maximum open circuit at
100 mA maximum.
1. Initially 30 milliohms Max.
2. Resistance increased 15
milliohms Max. after stress
5.1.
4 Contact current rating
1. Mount the connector to a test PCB
2. Wire power pins P1, P2, P8 and P9
in parallel for power
3. Wire ground pins P4, P5, P6, P10 and
P12 in parallel for return
4. Supply 6A total DC current to the power
pins in parallel, returning from the
parallel ground pins (P4, P5, P6, P10
and P12)
5. Record temperature rise when thermal
equilibrium is reached
1.5A per pin MINIMUM.
The temperature rise above
ambient shall not exceed 30
°C at any point in the connector
when contact positions are
powered. The ambient
condition is still air at 25 °C.
) molexfl C 5 s REVISION: ECR/ECN INFORMATION: TITLE: SHEET N0. EC No DATE DOCUMENT NUMBER CREATED / REVISED BV: CHECKED BY: APPROVED BY Grate Ma
PRODUCT SPECIFICATION
REVISION: ECR/ECN INFORMATION: SHEET No.
EC No: SH2005-0052
B DATE: 2004/08/10
TITLE: SERIAL ATA POWER CONNECTOR
1.27mm PITCH
3 of 5
DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY:
PS-67490-002 Grate Ma 2004/08/10
Grate Ma
2004/08/10 Vincent 2004/08/10
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1). DOC
5.2 MECHANICAL REQUIREMENTS
DESCRIPTION TEST CONDITION REQUIREMENT
5.2.1 Visual and
dimensional
inspections
EIA 364-18
Visual, dimensional and functional per
applicable quality inspection plan.
Meet product drawing
requirements.
5.2.2 Insertion force
EIA 364-13
Measure the force necessary to mate the
connector assemblies at a max. rate of 12.5
mm(0.492") per minute.
45 N MAXIMUM
NONE
LATCH
EIA 364-13
Measure the force necessary to unmate the
connector assemblies at maximun ra
te of 12.5
mm(0.492") per miniute.
10 N MINMUN through 50
cycles
5.2.3 Removal
force
LATCH EIA 364-13
Apply a static 25N unmating test load No damage and no disconnect
through 50 cycles
5.2.4 Durability
EIA 364-09
50 cycles for internal cabled application; Test
done at a Maximum rate of 200 cycles per
hour.
No physical damage. Meet
requirements of additional tests
as specified in the test
sequence
) molexfl C REVISTON: ECR/ECN INFORMATION: EC No DATE TITLE: SHEET No. DOCUMENT NUMBER CREATED / REVISED BV: CHECKED BY: APPROVED BY Grate Ma
PRODUCT SPECIFICATION
REVISION: ECR/ECN INFORMATION: SHEET No.
EC No: SH2005-0052
B DATE: 2004/08/10
TITLE: SERIAL ATA POWER CONNECTOR
1.27mm PITCH
4 of 5
DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY:
PS-67490-002 Grate Ma 2004/08/10
Grate Ma
2004/08/10 Vincent 2004/08/10
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1). DOC
5.3 ENVIRONMENTAL REQUIREMENTS
DESCRIPTION TEST CONDITION REQUIREMENT
5.3.1 Physical shock
EIA 364-27 Condition H
Subject mated connector to 30 gs half-sine
shock pulses of 11 msec duration. Three
shocks in each direction applied along three
mutually perpendicular planes for a total 18
shocks. See NOTE 2.
No discontinuities of 1 ms or
longer duration. No physical
damage.
5.3.2 Random vibration
EIA 364-28 Condition V Test letter A
Subject mated connectors to 5.35 gs RMS.
30 minutes in each of three mutually
perpendicular planes. See Note 2.
No discontinuities of 1 µs
or longer duration.
5.3.3 Humidity EIA 364-31 Method II Test Condition A.
Subject mated connectors to 96 hours at 40O
C with 90% to 95% RH See NOTE 1
5.3.4 Temperature life EIA 364-17 Test Condition III Method A.
Subject mated connectors to temperature life
at +85 O C for 500 hours. See NOTE 1
5.3.5 Thermal shock EIA 364-32 Test Condition I.
Subject mated connectors to 10 cycles
between -55 O C and +85 O C. See NOTE 1
5.3.6 Mixed Flowing Gas
EIA 364-65,Class 2A
Half of the samples are exposed unmated for
seven days, then mated for remaining seven
days. Other half of the samples are mated
during entire testing
See NOTE 1
NOTE-
1. Shall meet EIA 364-18 Visual Examination requirements, show no physical damage, and
shall meet requirements of additional tests as specified in the test sequences table.
2. Shock and vibration test fixture is to be determined by each user with connector vendors.
) molexfl C REVISION: ECR/ECN INFORMATION: EC No DATE TITLE: SHEET No. DOCUMENT NUMBER CREATED / REVISED BV: CHECKED BY: APPROVED BY Grate Ma
PRODUCT SPECIFICATION
REVISION: ECR/ECN INFORMATION: SHEET No.
EC No: SH2005-0052
B DATE: 2004/08/10
TITLE: SERIAL ATA POWER CONNECTOR
1.27mm PITCH
5 of 5
DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY:
PS-67490-002 Grate Ma 2004/08/10
Grate Ma
2004/08/10 Vincent 2004/08/10
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1). DOC
5.4 Group Test Item (3 pieces per group)
Test Sequence Groups A B C D E
Sample group sizes 12 12 12 12 12
Examination of
connector(s) 1,5 1,9 1,8 1,8 1,7
Low-Level Contact
Resistance (LLCR) 2,4 3,7 2,4,6 4,6
Insulation resistance 2,6
Dielectric withstanding
voltage 3,7
Current rating 7
Insertion force 2
Removal force 8
Durability 3 4(a) 2(a)
Physical shock 6
Vibration 5
Humidity 5
Temperature life 3
Reseating (manually
unplug/plug three
times)
5 5
Mixed Flowing Gas 3
Thermal shock 4
NOTE -
(a) Preconditioning, 20 cycles for the 50-durability cycle requirement.
(b) The insertion and removal cycle is at the Maximum rate of 200 cycles per hour.
6.0 PACKAGING
Parts shall be packaged to protect against damage during handling, transit and storage.
7.0 OTHER INFORMATION

Products related to this Datasheet

CONN CONTACT FOR SATA HSG
CONN CONTACT FOR SATA HSG
CONN CONTACT FOR SATA CONN
CONN CONTACT FOR SATA HSG
CONN CONTACT FOR SATA HSG
CONN CONTACT FOR SATA CONN
CONN CONTACT FOR SATA CONN
CONN CONTACT FOR SATA CONN