TCLT100. Series Datasheet by Vishay Semiconductor Opto Division

View All Related Products | Download PDF Datasheet
VISHAY. m w @ F are» www.vishay.com/doc?99912 ® ROH S cowum mums" FREE GREEN 5.2m- DDDDDDDD ogtocoug‘evanswersmwshay com www.v\shay.com/doc?91000
TCLT100. Series
www.vishay.com Vishay Semiconductors
Rev. 2.9, 01-Dec-15 1Document Number: 83515
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Optocoupler, Phototransistor Output,
SOP-4L, Long Mini-Flat Package
DESCRIPTION
The TCLT100. series consists of a phototransistor optically
coupled to a gallium arsenide infrared-emitting diode in a
4-lead SOP4L package.
APPLICATIONS
Switchmode power supplies
Computer peripheral interface
Microprocessor system interface
FEATURES
SMD low profile 4 lead package
•V
IORM = 1050 V
CTR flexibility available see order information
Special construction
Extra low coupling capacitance
DC input with transistor output
Creepage distance > 8 mm
Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
AGENCY APPROVALS
UL1577, file no. E76222
CSA (cUL) 22.2 bulletin 5A recognized file no. E-76222
BSI: BS EN 41003, BS EN 60065 (BS 415), BS EN 60950
(BS 7002), certificate number 7081 and 7402
DIN EN 60747-5-5 (VDE 0884)
FIMKO: EN 60950
•CQC
Note
See the safety standard approval list “Agency Table” for more
detailed information.
Note
Available only on tape and reel.
CE
AC
12
34
17295-5
ORDERING INFORMATION
TCLT100#
PART NUMBER
AGENCY
CERTIFIED/PACKAGE
CTR (%)
5 mA 10 mA 5 mA
UL, cUL, VDE, BSI, FIMKO 50 to 600 63 to 125 100 to 200 160 to 320 50 to 150 100 to 300 80 to 160 130 to 260 200 to 400
SOP-4L TCLT1000 TCLT1002 TCLT1003 TCLT1004 TCLT1005 TCLT1006 TCLT1007 TCLT1008 TCLT1009
10.2 mm
SOP-4L
VISHAY. amocoup‘evanswers@wshay com www.v\shay,com/doc?91000
TCLT100. Series
www.vishay.com Vishay Semiconductors
Rev. 2.9, 01-Dec-15 2Document Number: 83515
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute
maximum ratings for extended periods of the time can adversely affect reliability.
Note
Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering
evaluation. Typical values are for information only and are not part of the testing requirements.
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER CONDITION SYMBOL VALUE UNIT
INPUT
Reverse voltage VR6V
Forward current IF60 mA
Forward surge current tp 10 μs IFSM 1.5 A
Power dissipation Pdiss 100 mW
Junction temperature Tj125 °C
OUTPUT
Collector emitter voltage VCEO 70 V
Emitter collector voltage VECO 7V
Collector current IC50 mA
Collector peak current tp/T = 0.5, tp 10 ms ICM 100 mA
Power dissipation Pdiss 150 mW
Junction temperature Tj125 °C
COUPLER
Total power dissipation Ptot 250 mW
Operating ambient temperature range Tamb -55 to +100 °C
Storage temperature range Tstg -55 to +125 °C
Soldering temperature Tsld 260 °C
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT
INPUT
Forward voltage IF = 50 mA VF-1.251.6 V
Junction capacitance VR = 0 V, f = 1 MHz Cj-50-pF
OUTPUT
Collector emitter voltage IC = 1 mA VCEO 70 - - V
Emitter collector voltage IE = 100 μA VECO 7--V
Collector emitter cut-off current VCE = 20 V, IF = 0 A ICEO - 10 100 nA
COUPLER
Collector emitter saturation voltage IF = 10 mA, IC = 1 mA VCEsat --0.3V
Cut-off frequency VCE = 5 V, IF = 10 mA,
RL = 100 Ωfc- 110 - kHz
Coupling capacitance f = 1 MHz Ck-0.3-pF
VISHAY. Pmmuanssm Pm (MW) 150 agtocoup‘evanswersmwshay com www.v\shay,com/doc?91000
TCLT100. Series
www.vishay.com Vishay Semiconductors
Rev. 2.9, 01-Dec-15 3Document Number: 83515
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
According to DIN EN 60747-5-2 (VDE 0884) (see figure 2). This optocoupler is suitable for safe electrical isolation only within the safety
ratings. Compliance with the safety ratings shall be ensured by means of suitable protective circuits.
Fig. 1 - Derating Diagram Fig. 2 - Test Pulse Diagram for Sample Test according to
DIN EN 60747-5-2 (VDE 0884); IEC60747-5-5
CURRENT TRANSFER RATIO (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
IC/IF
VCE = 5 V, IF = 5 mA TCLT1000 CTR 50 - 600 %
VCE = 5 V, IF = 10 mA
TCLT1002 CTR 63 - 125 %
TCLT1003 CTR 100 - 200 %
TCLT1004 CTR 160 - 320 %
VCE = 5 V, IF = 1 mA
TCLT1002 CTR 22 45 - %
TCLT1003 CTR 34 70 - %
TCLT1004 CTR 56 100 - %
VCE = 5 V, IF = 5 mA
TCLT1005 CTR 50 - 150 %
TCLT1006 CTR 100 - 300 %
TCLT1007 CTR 80 - 160 %
TCLT1008 CTR 130 - 260 %
TCLT1009 CTR 200 - 400 %
SAFETY AND INSULATION RATINGS
PARAMETER CONDITION SYMBOL VALUE UNIT
Partial discharge test voltage - routine test 100 %, ttest = 1 s Vpd 2kV
Partial discharge test voltage -
lot test (sample test)
tTr = 60 s, ttest = 10 s,
(see figure 2)
VIOTM 8kV
peak
Vpd 1.68 kVpeak
Isolation test voltage (RMS) VISO 5000 VRMS
Insulation resistance
VIO = 500 V RIO 1012 Ω
VIO = 500 V, Tamb = 100 °C RIO 1011 Ω
VIO = 500 V, Tamb = 150 °C
(construction test only) RIO 109Ω
Forward current Isi 130 mA
Power dissipation Pso 265 mW
Rated impulse voltage VIOTM 8kV
Safety temperature Tsi 150 °C
Comparative tracking index CTI 175
Clearance distance 8.0 mm
Creepage distance 8.0 mm
Insulation distance (internal) 0.40 mm
0 25 50 75 125
0
50
100
150
200
300
Tsi - Safety Temperature (°C)
150
94 9182-2
100
250
IR-diode
Isi (mA)
Phototransistor
Pso (mW)
t
13930
t1
, t2 = 1 s to 10 s
t3, t4 = 1 s
ttest = 10 s
tstres = 12 s
VIOTM
Vpd
VIOWM
VIORM
0
t1
ttest
tTr = 60 s tstres
t3t4
t2
VISHAY. agtocoup‘evanswersmwshay com www.v\shay,com/doc?91000
TCLT100. Series
www.vishay.com Vishay Semiconductors
Rev. 2.9, 01-Dec-15 4Document Number: 83515
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 3 - Test Circuit, Non-Saturated Operation
Fig. 4 - Test Circuit, Saturated Operation
Fig. 5 - Switching Times
SWITCHING CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT
Delay time VS = 5 V, IC = 2 mA, RL = 100 Ω,
(see figure 3) td-3-μs
Rise time VS = 5 V, IC = 2 mA, RL = 100 Ω,
(see figure 3) tr-3-μs
Fall time VS = 5 V, IC = 2 mA, RL = 100 Ω,
(see figure 3) tf-4.7- μs
Storage time VS = 5 V, IC = 2 mA, RL = 100 Ω,
(see figure 3) ts-0.3- μs
Turn-on time VS = 5 V, IC = 2 mA, RL = 100 Ω,
(see figure 3) ton -6-μs
Turn-off time VS = 5 V, IC = 2 mA, RL = 100 Ω,
(see figure 3) toff -5-μs
Turn-on time VS = 5 V, IF = 10 mA, RL = 1 kΩ,
(see figure 4) ton -9-μs
Turn-off time VS = 5 V, IF = 10 mA, RL = 1 kΩ,
(see figure 4) toff -10- μs
Channel I
Channel II
95 10804
R
G
= 50 Ω
t
p
t
p
= 50 µs
T= 0.01
+ 5 V
I
F
0
50 Ω100 Ω
I
F
I
C
= 2 mA; adjusted through
input amplitude
Oscilloscope
R
L
= 1 MΩ
C
L
= 20 pF
Channel I
Channel II
95 10843
R
G
= 50 Ω
t
p
t
p
= 50 µs
T= 0.01
+ 5 V
I
C
I
F
0
50 Ω1 kΩ
I
F
= 10 mA
Oscilloscope
R
L
C
L
20 pF
1 MΩ
tpt
t
0
0
10 %
90 %
100 %
tr
td
ton
tstf
toff
IF
IC
tpPulse duration
tdDelay time
trRise time
ton (= td + tr) Turn-on time
tsStorage time
tfFall time
toff (= ts + tf) Turn-off time
96 11698
VISHAY. 120 save m 100 ‘ ‘ H m \ :' \ //’ 1’ Z” T ”MM 100 agtocoup‘evanswersmwshay com www.v\shay,com/doc?91000
TCLT100. Series
www.vishay.com Vishay Semiconductors
Rev. 2.9, 01-Dec-15 5Document Number: 83515
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
Fig. 6 - Total Power Dissipation vs. Ambient Temperature
Fig. 7 - Forward Current vs. Forward Voltage
Fig. 8 - Normalized Current Transfer Ratio (non-saturated) vs.
Ambient Temperature
Fig. 9 - Normalized Current Transfer Ratio (saturated) vs.
Ambient Temperature
Fig. 10 - Normalized Current Transfer Ratio (non-saturated) vs.
Forward Current
Fig. 11 - Normalized Current Transfer Ratio (saturated) vs.
Forward Current
0
50
100
150
200
250
300
0 40 80 120
P
tot
- Total Power Dissipation (mW)
T
amb
- Ambient Temperature (°C)
96 11700
Coupled device
Phototransistor
IR-diode
0.1
1
10
100
0.6 0.8 1.0 1.2 1.4 1.6
IF - Forward Current (mA)
VF - Forward Voltage (V)
Tamb = 110 °C
Tamb = 75 °C
Tamb = 25 °C
Tamb = 0 °C
Tamb = - 55 °C
0
0.2
0.4
0.6
0.8
1.0
1.2
NCTR - Normalized CTR (non-saturated)
Tamb - Ambient Temperature (°C)
IF = 5 mA
Normalized to CTR value:
IF = 5 mA, VCE = 5 V, Tamb = 25 °C
-60 -40 -20 0 20 40 60 80 100 120
0
0.2
0.4
0.6
0.8
1.0
1.2
NCTR - Normalized CTR (sat)
Tamb - Ambient Temperature (°C)
Normalized to CTR value:
IF = 5 mA, VCE = 5 V, Tamb = 25 °C
-60 -40 -20 0 20 40 60 80 100 120
0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
0.1 1 10 100
NCTR - Normalized CTR (NS)
IF- Forward Current (mA)
Tamb = 0 °C
Tamb = 100 °C
Tamb = 75 °C
Tamb = -55 °C
Tamb = 25 °C
Normalized to:
IF = 5 mA, VCE = 5 V
0
0.2
0.4
0.6
0.8
1.0
1.2
0.1 1 10 100
NCTR - Normalized CTR (sat)
IF- Forward Current (mA)
VCE = 0.4 V
Normalized to:
IF= 5 mA,
VCE = 5 V,
Tamb = 0 °C
T= 75 °C
Tamb = -55 °C-
Tamb = 25 °C
Tamb = 100 °C
amb
Tamb = 25 °C
VISHAY. 12a 100 agtocoup‘evanswersmwshay com www.v\shay,com/doc?91000
TCLT100. Series
www.vishay.com Vishay Semiconductors
Rev. 2.9, 01-Dec-15 6Document Number: 83515
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 12 - Collector Dark Current vs. Ambient Temperature
Fig. 13 - Collector Current vs. Forward Current
Fig. 14 - Collector Current vs. Collector Emitter Voltage
Fig. 15 - Collector Emitter Saturation Voltage vs. Collector Current
Fig. 16 - Current Transfer Ratio vs. Forward Current
Fig. 17 - Turn-on/off Time vs. Collector Current
0.001
0.01
0.1
1
10
100
1000
10 000
ICE0 - Leakage Current (nA)
Tamb - Ambient Temperature (°C)
IF = 0 mA
VCE = 40 V
VCE = 24 V
VCE = 12 V
-60 -40 -20 0 20 40 60 80 100 120
0.1 1 10
0.01
0.1
1
100
IC - Collector Current (mA)
IF - Forward Current (mA)
100
95 11027
10
VCE = 5 V
0.1 1 10
0.1
1
10
100
VCE - Collector Emitter Voltage (V)
100
95 10985
IC - Collector Current (mA)
I
F
= 50 mA
5 mA
2 mA
1 mA
20 mA
10 mA
110
0
0.2
0.4
0.6
0.8
1.0
VCEsat - Collector Emitter
Saturation Voltage (V)
IC - Collector Current (mA)
100
CTR = 50 %
used
20 % used
95 11028
10 % used
0.1 1 10
1
10
100
1000
CTR - Current Transfer Ratio (%)
IF - Forward Current (mA)
100
95 11029
VCE = 5 V
04
0
2
4
6
8
10
IC - Collector Current (mA)
8
95 11030
ton/toff - Turn-On/Turn-Off Time (µs)
Non-saturated
operation
VS = 5 V
RL = 100 Ω
toff
ton
6
2
— V VISHAY. .com/dm2791000 www.msha
TCLT100. Series
www.vishay.com Vishay Semiconductors
Rev. 2.9, 01-Dec-15 7Document Number: 83515
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 18 - Turn-on/off Time vs. Forward Current
PACKAGE DIMENSIONS (in millimeters)
PACKAGE MARKING (example)
01015
0
10
20
30
40
50
I
F
- Forward Current (mA)
20
95 11031
t
on
/t
off
- Turn-On/Turn-Off Time (µs)
Saturated operation
VS = 5 V
RL = 1 kΩ
toff
ton
5
22533
7.50 ± 0.20
Seating plane
0.70 + 0.30
- 0.40
technical drawings
according to DIN
specifications
8.20
10.80
Possible footprint
2.54
0.90
4.10 max.
3.80
2.00
2.30 max.
2.54 nom.
Pin no. 1 identification
12
43
0.45 ± 0.1
+ 0.30
- 0.40
10.20
0.20 + 0.10
- 0.05
0.10
TCLT1003
V YWW 68
max zen ”T W I" 7* r$$$§$$$$$$$fi>f _] ‘fi— (1*, , , ,, [T+ a \ A .. \L_.l |_> 7 4' fiLCD agtocoug‘evanswersmwshay com www.v\shay.com/doc?91000
TCLT100. Series
www.vishay.com Vishay Semiconductors
Rev. 2.9, 01-Dec-15 8Document Number: 83515
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TAPE AND REEL DIMENSIONS (in millimeters)
Fig. 19 - Reel Dimensions (3000 units per reel) Fig. 20 - Tape Dimensions
SOLDER PROFILE
Fig. 21 - Lead (Pb)-free Reflow Solder Profile
according to J-STD-020
HANDLING AND STORAGE CONDITIONS
ESD level: HBM class 2
Floor life: unlimited
Conditions: Tamb < 30 °C, RH < 85 %
Moisture sensitivity level 1, according to J-STD-020
ESD sticker
Tape slot
in core
330
(13")
Regular, special
or bar code label
17999
22662
technical drawings
according to DIN
specification
4.25 8
2.3
24
2.7
0.3
16
7.5
10.6
Ø 1.55
1.75
Ø 1.6
Direction of pulling out
— VISHAY. V
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 08-Feb-17 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED

Products related to this Datasheet

OPTOISOLATOR 5KV TRANS SOP-4L
Available Quantity: 1,662
Unit Price: 76
OPTOISOLATR 5KV TRANSISTOR 4-SOP
Available Quantity: 1,268
Unit Price: 76
OPTOISOLATR 5KV TRANSISTOR 4-SOP
Available Quantity: 3,052
Unit Price: 76
OPTOISOLATR 5KV TRANSISTOR 4-SOP
Available Quantity: 35,303
Unit Price: 76
OPTOISOLATR 5KV TRANSISTOR 4-SOP
Available Quantity: 0
Unit Price: 76
OPTOISOLATR 5KV TRANSISTOR 4-SOP
Available Quantity: 0
Unit Price: 76
OPTOISOLATR 5KV TRANSISTOR 4-SOP
Available Quantity: 0
Unit Price: 76
OPTOISOLATR 5KV TRANSISTOR 4-SOP
Available Quantity: 0
Unit Price: 76
OPTOISOLATR 5KV TRANSISTOR 4-SOP
Available Quantity: 0
Unit Price: 76